similar to: DTMF issue with SIP

I use codec g711u or g711a but comuncation between two sip client (XTen lite) have bastard dalay of 0,5 - 1 second Is it normal ? Are there any configuration to solve problem ? Thanks all

I've got the XTEN Lite soft phone mostly working with * but it's dropping out like a very bad cell phone call. The GSM codec is worst (unusable), G711u and G711a are best but not good enough to use. I don't think it's a lack of bandwidth. What tuning options or approaches should I be investigating to make this work. Also, what's the best soft phone(s) for Windows XP?

For the benefit of everyone, having H323 Configuration problem due to H245 Tunnel, check the h323 Config embeded at the end. Comment the offending line as under: ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=yes ; -----Original Message----- From: Tola Ogunsan [mailto:tolaniye@hotmail.com] Sent: Wednesday, May 25, 2005 1:03 PM To: Kanuri, Seshu (Company IT) Subject: RE: oh323 problems

Hi! I decided to apply Chris's patch for the rtp problem, it is working just fine now. Thanks Chris!. I think that Mark should submit it to the CVS. Ildefonso. icamarg@unet.edu.ve >Pete, > >Try this patch below... I noticed that eStara's softphone has the same >problem as xten's softphone when it comes to DTMF. Seems as though = >Asterisk >is not looking for

I've configured Asterisk 0.7.2 to work together with Cisco ATA186 (SIP,G.711. RFC2833) and OpenPhone (H.323, G.711). But there is an issue while calling from ATA186 to OpenPhone via Astrisk - when I press any key on analogue phone connected to ATA, Asterisk shows following message: -- Executing Dial("SIP/519-3781", "OH323/62.213.36.100|20|Tt") in new stack --

I have a tdm 3xfxs and 1xfxo, aslo I have a setting with 1 snom 190 and 2 xten line. I can call from the snom to the ptsn line at the fxo port ok. I can call from the ptsn to the xten lite phone. I can call from the xten lite to snom but what I CAN`T do is; Call from xten to ptsn. When I dial from the xten, I can hear the dialed party, but he cannot hear me... Tips? Help? What I'm

Hi I'm trying to implement a Callback mechanism whereby I generate a Call file and connect an arbitrary extension with my cellphone (via a SIP Channel). If I create a .Call file that connects the channel "SIP/12345678@Provider.net" with a local extension/context I get some weird issues with DTMF tones. I've set dtmf=2833 and the codec in use is G711a. For example - I create

I've this setup : CiscoAta186 -> asterisk with oh323 chan -> gsmgateway dtmf doesn't work, tryed inband, with g711a and g729 codecs CiscoAta186 -> gsmgateway works, even with g729, so it seems the problem is in * oh323.conf has inBandDTMF=yes, what else may I need to tweak ?

Hi all, I've an asterisk 1.2.5 running very well for about a 9 months, and suddenly i cannot dial extensions 4XXX from SIP Phones. Now comes the wired stuff... I can dial this extensions from IAX phones as well as from Analogue extensions connected to our legacy pbx, that is installed on front of asterisk. So : Zapata Calls to SIP extensions 4XXX - OK IAX to SIP 4XXX-OK SIP to SIP 4XXX -

Dear Guys, I?ve test Xten Lite softphone to connect to my Asterisk Box but it registers all the three lines at the same time and if I try to dial an extension it tries to reach 3 Ext. at the same time, can somebody haved this trouble? and how can I fix it. Also, I ?ll like to have the Xten LITE or PRO Softphone (Lite is free and PRO about $50.00 USD) it can hanle 3 lines (lite) and 6 lines

I have d/l the iso (*@home 0.9) , built the * box and followed the directions in the * handbook and http://www.geekgazette.com/index.php?option=com_content&task=view&id=2&Itemi d=26. I created extension 200 and verified that * was running fine. Loaded Xten lite, setup the proxy for local ip (10.0.0.201) per the handbook. After turning off the Norton Firewall protection, I am able to

Ok I have a question. I have Xten-lite working with our Asterisk system and I am able to make and get calls. But the main problem is the sound is very choppy and sometimes it cuts off words. I have tested it with ulaw and alaw as well as GSM. They all do the same. ulaw seems to work better. I also have an ATA-186 which works great without this problem. Here is my Sip.conf settings.

Hi all, I'm looking at the mysql cdr backend to record call details, but I can't find any documentation on how to set up my database. Specifically, what is the table definition for the cdr table? I saw that the dbname, user and password can be set in cdr_mysql.conf, but there's no information on what table to use. Thanks, Gijsbert

Hi, the link to the R code for repeated measurement analyses of J Lindsey is unfortunately not working. I am desperate for repeated measurements in R; could you please help me out. Sincerely, Dr. G. Stoet -- Dr. Gijsbert Stoet email: stoet@thalamus.wustl.edu Web: http://eye-hand.wustl.edu/lab/people/stoet.html Phone: (314)7474095 Fax: (314)7474370

Not really r-specific: Z = (b1 - b2) / SQRT ( SEb1^2 + SEb2^2) -------Original Message------- From: Gijsbert Stoet <stoet at volition.wustl.edu> Sent: 07/20/03 09:51 PM To: r-help at stat.math.ethz.ch Subject: [R] how to test whether two slopes are sign. different? > > Hi, suppose I do want to test whether the slopes (e.g. determined with lsfit) of two different population are

Hi, I have the following situation: I've installed Asterisk at Machine 1 (M1 - IP: 192.168.1.145) and X-Lite (X_lite-Xten-Win32-1103m.exe from www.xten.com) at Machine 2 (M2 - IP: 192.168.1.100) and Machine 3 (M3 - IP: 192.168.1.200). I need to catch the SIP and MGCP messages that will appear when M2 calls to M3 and vice versa. The SIP messages are working (I don't have problems with the

Same here Michael and the PocketPC version seems unaudible with any codec; early days trying that though. Simon -----Original Message----- >From: "Michael Van Donselaar"<mvand@neb.rr.com> >Sent: 22/04/03 04:10:24 >To: "asterisk-users@lists.digium.com"<asterisk-users@lists.digium.com> >Subject: Re: [Asterisk-Users] Xten - Free windows SIP

Hello, what i want to do is to find a way how i can solve the following problem. we want to offer our customers in the country side also isdn over voip but we have to use internet connections from another company for this. This company offers a QoS on this connections but only with 192kbit bandwith and with the ATM headers a normal g711a call has exactly 103,5 kbit/s so we can only use 1 channel

In an attempt to eliminate audio echo I upgraded one side of a working x-lite to x-lite connection to eyebeam. No joy, and what was worse is the audio was even worse now - just noise. Ok, I upgraded the other side to eyebeam and same thing. I'm not even using video (will enable it in sip.conf later, one change at a time). The connection looks something like: eyebeam client

All, I have my * box NAT'd with all ports forwarded that are SIP related (based on Wiki). I also have nat=yes, externalip=WAN address of firewall, internalip=LAN network of *. I have my Xten soft phone on a PC which is NAT'd behind firewall with ports forwarded. I have also followed instructions on Wiki for Xten. I can authenticate fine, and sip show peers shows my extension is OK,