similar to: Re: [Asterisk] Kernel panic, ZapRAS & E400p

Hi, I am trying to use Asterisk cmd ZapRAS (http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+ZapRAS), I pathed the ppp daemon ftp://ftp.digium.com/pub/zaptel/misc/, but when I try to use it, I obtain the following error: Connected to Asterisk 1.2.4 currently running on TSU-R1 (pid = 7242) Verbosity was 0 and is now 44 -- Accepting call from '123456789' to

I'm trying to use ZapRAS to enable ppp connection through my E1. After the ZapRAS command is executed, all sound is crappy on all lines! The only solution is to reboot the machine (or halt it, and then power it on since Digium's hardware doesn't like reboots). Anyone know how this can happen?! I'm using * 1.0.6 on Dell PowerEdge 1850 which are told (too late though) not to work

Hi, I'm trying to get ZapRAS working but not getting very far.. Asterisk CLI shows: WARNING[3355]: app_zapras.c:173 run_ras: wait4 returned -1: No child processes and /var/log/messages shows: using the plugin option requires root privilege Can anyone shed any light on this and any fix? Googling the error doesn't find much.. I'm not sure what 'plugin' it is talking about,

hi all Where can I find documentation about how to setup ZapRAS? What I want to do (optimally) is to allow for automatic dial-up to external sites, each having an ISDN router. Today we use a small ISDN router for this, but it'd be a lot better, IMHO, to have asterisk do this (functioning as a ISDN router), as we may cancel our BRIs then. Is this possible? And if so, how can I do it? I

Hi I try to use zapras. I am using zaptel-bri-0.0.2 I compiled and patched pppd from ftp://ftp.digium.com/pub/zaptel/misc/ pppd is /usr/sbin/pppd Any idea whats going wrong here? Thomas -- Accepting call from '95' to '8526' on channel 1, span 1 -- AGI Script nuller.agi completed, returning 0 -- Executing ZapRAS("Zap/1-1",

Hi, I'm trying to get zapras do work, I had downloaded the pppd-source and the 2 patches. I succefull compiled and install the patched version of pppd, but got this error in message-log Jul 15 11:43:32 voip1 pppd[9296]: In file /etc/ppp/filters: unrecognized option 'active-filter' Jul 15 11:43:57 voip1 pppd[9299]: Plugin zaptel.so loaded. Jul 15 11:43:57 voip1 pppd[9299]: Zaptel

hi! I'm trying to get zapras working in GSM csd network. Whenever a dialup call is initiated from the mobile to the * gateway the following appears in the log and zapras terminates. Phone gives the error dialup not answered. ==> /var/log/messages <== pppd[2310]: Plugin zaptel.so loaded. pppd[2310]: Zaptel Plugin Initialized pppd[2310]: Using zaptel device 'stdin' pppd[2310]:

I see in the changelog that ENUM support has been added.. anyone know what this is? -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

Hi! I've been trying to get ZapRAS or PPPD to work. Neither does! All i get is LCP: timeout sending Config-Requests But after trying, all voicelines get crazy! It sounds like robots when somebody calls! And since the zaptel drivers can't unload (the server hangs totaly if I try!), I have to reboot the whole server! The robot-voice is only on our side, it sounds fine at the other end.

Hello everyone, We have an E400P Card from phoniceq.? There is a DAHDI Driver posted at: http://e400p.phoniceq.com/driver/dahdi-tor2-tormenta3-e1.tgz but, it doesn't work.? The author (martin (or marcin) pycko) says that it isn't finished. I've e-mailed martin, and he stated that he would fix the driver AFTER we order 10 more cards, not before.? I have a difficult time ordering

Hey all, ? I'm trying to get an E400P and 2 X100Ps working together in the one box and don't seem to be having much luck. ? I can get the two different types of boards working separately, but not together.? I've made calls on both the X100P and have seen sync and correct signalling on the E400P.? But when I try to enable to configs together I get the following: ? modprobe wcfxo

Did anybody ever come across an affordable, residential cable/dsl router with support for QoS? The ones I've seen so far (Netgear, D-Link and W-Linx) do not seem to support it. I noticed that even email can damage a G.711 stream on an 128kbit uplink, leave alone file-sharing applications. I understand this is strictly related to *, but nevertheless of interest to many of us. Thilo

Hello, Does anyone know what driver to use with an "Eicon Diva Server 4BRI" card? My modem.conf: -------------- [interfaces] context=remote driver=i4l msn=16453 device => /dev/ttyds01 -------------- I get the following error: -------------------------- == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) WARNING[8192]: File chan_modem.c, Line 383

hi everybody, i'm tryint to install a asterisk system which acts as a dialin server using a Digium Wildcard 205P. acording to http://www.voip-info.org/wiki/view/Asterisk+cmd+ZapRAS i need a patched version of pppd, but it does not compile on my system. Linux box 2.6.17-gentoo-r8 #1 SMP Tue Sep 26 13:17:23 CEST 2006 x86_64 AMD Athlon(tm) 64 Processor 3200+ GNU/Linux gcc -4.1.1, glibc-2.4

hi All, quit new to asterisk, can anybody tell me whether Wildcard E400P and Wildcard E100P support R2 CAS protocol. if they do, what is the value, i should set to 'signalling' parameter in the zapata.conf file? Surajee -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I found E400P quad PRI card quite cheap (749USD): http://www.govarion.com/product_info.php?cPath=1&products_id=2&osCsid=68cdd6e3d08754 in comparison to te410p (approx 1500 USD ) http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TE410P Now newer generation with HW echo canceling emerged (te411p). I'm not sure in what things those two cards

Hi everybody. We have a problem with the configuration of the card, the cards work and we receive incoming calls but asterisk don't receive dnid. We have 5 servers with 1 E400P with the same problem and the telco told us that we need to configure the card to request it, how we can do this? Can you help me to solve the problem. Best regards, Carlos Fernández Puente carlos.fernandez@alisys.net

A brandly new E400P 128 channel PRI, you can find more information on the Digium's site. The card was not used before, I sell it cause our company just don't need, we use Cisco AS5300. I can offer you the PCI PRI at $940 if bought in the next 2 days, I can send it to you via FedEx or DHL express. Please email me for more details! Regards, Kalin ----------------------------- IPPN Networks

Hi, Can someone send me a sample on how to get an E400P working with ISDN PRI signaling? What conf. files must I edit? thanks in advance Eduardo

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm attempting to hook up the E400P card to a Siemens ISDN module. I have no knowledge of these Siemens products, so I'm acting on what I've been told about it. The Siemens side is configured to "ISDN30: ECMA QSIG". The Siemens manual states the card provides 30 ISDN B-channels which can be used for trunking or