similar to: Eicon BRI-card

Hello, I have som problems with my BRI/capi setup. I manage to call in to the system (some rows below). ---------------- -- Executing Dial("CAPI[contr1/16453]", "SIP/BYEXTENSION@janm|10") in new stack -- Called s@janm -- SIP/janm-63f5 is ringing -- SIP/janm-63f5 is ringing -- SIP/janm-63f5 is ringing ---------------- But I can't make outgoing calls from

Hello, Does anyone know what driver to use with an "Eicon Diva Server 4BRI" card? My modem.conf: -------------- [interfaces] context=remote driver=i4l msn=16453 device => /dev/ttyds01 -------------- I get the following error: -------------------------- == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) WARNING[8192]: File chan_modem.c, Line 383

I have some problems with busy detection and SIP. When I'm making a phonecall (out or internal) and someone else is calling me, the phone (Snom200) is ringing and leaving the first caller (no difference if I call someone or if someone calling me) in the background waiting. It doesn?t hang up the first call but the second one is overriding the first. Is there anyone that has experienced the

As requested by several people, an Overview document has been posted at http://blogs.sun.com/sunay The reference section also contains a pointer to the slides that will be used for tonights presentation. See you all there. Cheers, Sunay -------- Original Message -------- Subject: [osol-discuss] SVOSUG - This Thurs, August 24, Sunay Tripathi presents Crossbow 7:30pm SCA03 Date: Mon, 21 Aug

OK! I'm sorry about this. As I wrote earlier I'm totally lost... but I will try to explain the problem in steps bellow, ok. 1. I installed the rpm's for samba, Version 2.0.2a-ssl I think this is the version distributed with redhat linux 7.0 2. Then I changed the parameters in the /etc/samba/smb.conf file, and in this file I added the folowing parameters. [global] netbios name

Hi. After running with the crossbow bits for a while, I discovered that the network management port on my T1000 wasn''t working properly (no link light). When logging in on the serial management port and running "resetsc", I got this: --->8--- ALOM POST 1.0 Dual Port Memory Test, PASSED. TTY External - Internal Loopback Test TTY External - Internal Loopback Test, PASSED.

The diagnostis.txt file don't seem to solve this problem. Now my samba server is now available for browsing, I dont know how I should solve this actually I'm totally lost I even tried to erase the rpm file and compiled a source file. Mvh / Best regards Daniel Andersson ------------------------------------------------------------ REJLERS INGENJ?RER AB R?dhusgatan 15, S-541 30 SK?VDE,

Hello, is it possible to use a eicon diva server 2M as FXO ? Regards Andreas Moroder

Hi Guys, asterisk drive me crazy! Now I have tried to use FreePBX but it require MySQL which I can not install du to a conflict with PostgreSQL. Does someone know, how to configure FreePBX to use PostgreSQL? Or does someone know another Asterisk Web-Frontend, without Database? It is realy not funny, to force users to install this monster on an ARM Microcontroller. I need only enterprise

Hi, Does anyone use EICON Diva Server Card ISDN and CAPI ? I need some help for drivers installation. I use RED HAT 8.0 (kernel 2.4.18-14) I want to know which drivers should I use and how can I install it. Thanks Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I have installed an asterisk server with 7960 sip phones and an eicon card (diva 4bri server, I use only three channel) using capi channel. Everything seems to work fine, but from time to time (two or twice a day) during a call I get a capi error in asterisk log and asterisk doesn't work anymore: ==== Apr 1 10:38:24 ERROR[20495]: File chan_capi.c, Line 738 (capi_write): error

Thank you for the comments on my n2p sip issues, I'll post again when (if) I get it going.

Dear All, I have a production system with and Eicon Diva Server XBRI, and all works fine, but Today I have seen two crash with the next messages in console: -- Executing Dial("CAPI[contr2/971846147]/10", "SIP/790||r") in new stack == Everyone is busy at this time -- Executing Hangup("CAPI[contr2/971846147]/10", "") in new stack == Spawn extension

Does anyone have this card working with Asterisk? Thanks

Hello all, I'm not familiar with Asterisk at all, so any help would be appreciated. I have an ISDN card lspci: 07:06.0 Network controller: Eicon Technology Corporation DIVA Server PRI-30M 2.0 which has 8 channels active. I am wondering if a:, this card is supported/can be made to work with Asterisk, and b:, if it is possible to make Asterisk initiate 2 outgoing voice calls, which it

Hi. I've been trying out Asterisk and it looks good. I've have got the VoiP stuff working with some softphones and I'm very impressed. My next step was to interface it with my phone system here to try it out that way. I have an Eicon Diva PCI 2.02 (not server) lying around which I have put into my asterisk box and I've tried to configure it but I've had no luck so far.

Hello, I'm having a problem with significant audio dropouts occurring in voicemail messages left via an ISDN-BRI trunk. Dropout durations are as short as 15ms and as long as 200-300ms. The audio that is recorded, appears to be otherwise complete, just with frequent holes punched in it. The same trunk has no problems with audio files played toward it from voicemail, nor interacting with

Hi, just a quickie... We've bought one of these primarily for Hylafax use, but since this card can run in NT mode, I'd be curious to use one of the four ports on it to 'serve' our PBX as a trunk for tests and playing with Asterisk. My question is, "Is it likely that we can use 3 ports with Hylafax in normal ISDN client mode, and the remaining port in NT mode with

Hello, I'm thinking of deploying Asterisk. I already have a handful of EICON Diva 2.01 PCI ISDN cards. I was thinking if it's possible to insert 4 such cards to my PC-Asterisk server (which I yet have to install) and use them as 4 lines in case anyone has to call me in / I have to call out using ISDN line(s)? Any reply appreciated. Tomek

Hi all, I have trouble getting my setup configured properly. I have a Eicon|DIVA Server BRI-2M/-2F card installed, using melware driver and following asterisk wiki guidelines. However whe I try to dialup the number I get only silence and after a while disconnection. The following is displayed on the console. What am I doing wrong ? *CLI> == Starting CAPI[contr1/0991]/0 at demo,0991,1