similar to: low-cost * (newbie question)

Hey all...I'm trying to use gnophone to connect to my asterisk box behind my firewall..I thought I could just setup a tunnel with something like ssh host.com -L5036:asteriskserver:5036 and just change my gnophone to connect to localhost:5036 but I never see anything happen on the asterisk server. I'm even trying this on the same network just in case there is something funky with NAT.

Hi, I have a RH9 system with an onboard VIA sound chip. According to the archives, VIA won't work for asterisk. So, I disabled the VIA and I purchased a Creative Labs "Soundblaster PCI 128-Voice" soundcard ($13). This card is on the "approved" RedHat list. However, the documentation inside the package says "VIBRA 128". Anyhow, kudzu doesn't see then

Hi all, I noticed that in some circumstances quota warnings are ignored. The bug arises when both of the following are used: 1. percentage-based quota warnings, i.e.: quota_warning = storage=1%% quota-warning 1 %u 2. filesystem quota backend (and probably others, except for quotas configured directly in dovecot config) Percentage-based quota warnings have rule.bytes_limit recalculated

Hello all! I've talked recently to the head of R&D dept. of Telkom Telos (www.telos.com.pl) - a big Polish company specialised in making phones. I gave them the idea of creating a cheap (cost-effective) hardware IP phone. The phone we discussed would include hardware support for IAX (though probably SIP/sth. else would be required too if it were to hit the market.. what do you

On 17.02.2015 20:03, Micha? Gi?y?ski wrote: > > On 21.11.2014 20:04, Grzegorz Nosek wrote: >> Hi all, >> >> I noticed that in some circumstances quota warnings are ignored. The >> bug arises when both of the following are used: >> >> 1. percentage-based quota warnings, i.e.: >> >> quota_warning = storage=1%% quota-warning 1 %u >>

Hi all, forgive the question but is it possible to use PCI modem cards (aka winmodem's) as FXO/FXS ports in * ? what about external modems like the USR Sportsters? Thanks in advance, Bryan. Bryan Nolen Lead Developer http://Arc.Net.AU http://cdonline.com.au

Gabe Bourque wrote: > Hello Anton Tinchev, > > I'm writing to you in hopes you can answer a few questions regarding > Asterisk/Digium and it's reliability. I saw your posting in the > Asterisk mailing list (Re: [Asterisk-Users] Is Asterisk ready for "real" > use?) and decided to write directly to you. The reason being that you > are one of only a few

hi everybody and thanks for replying to my previous posts! i have some questions about the new cards announced on digium's website: these cards are 1-4 fxs interfaces, meaning i can take 4 analog phone handsets w/standard rj11's and plug them in to dial via *, right? not until fxo is implemented (is it going to be? when?) can i plug analog phone lines in? if the ports are made fxo/fxs

I see many posts about using ISDN cards and modem cards. Does this mean I can use a regular modem (that supports voice) as an FXS, or FXO ? If so, can you provide an example. It might be the easiest way to test Asterisk's collaboration with the PSTN (or analog phones) and provide proof of concept to non-believers. Thanks. Shoval -------------- next part

Hello all, New to the list, Asterisk and this wonderful world of convergence. From reading the docs, list and websites I hopefully correctly understand that I can use a plain cheap isdn4linux supported ISDN (passive) TA to hook up the PC to the ISDN line from the telco (FXO card?). Next in the PC I also need a FXS card like a Digium TDM10B or PhoneJack so I can hook up an analog phone to it. In

Hi, Does anyone use EICON Diva Server Card ISDN and CAPI ? I need some help for drivers installation. I use RED HAT 8.0 (kernel 2.4.18-14) I want to know which drivers should I use and how can I install it. Thanks Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

Everyone-- Here's a cost analysis, rather crude and inspecific, of using Asterisk to implement a phone system. I'm really quite naive and new to all this, so I'd appreciate any corrections, tips, pointers, etc, from those in the community, who have far greater experience, knowledge, skill, etc. than I. Am I forgetting something important? Am I way off in my estimates? The Minimum

Hello, I'm having trouble working out how to send DTMF tones to an external IVR. My system has an analog phone connected to a TDM400P card, a SIP software phone (Zultys LIPZ4) and is connected to a BRI in Australia with a NETjet-S card. I'm using ISDN4Linux and a 2.4.25 kernel patched with the ISDN audio patch from Traverse (which allows the card to do voice). DTMF works fine between

On Sun, Aug 17, 2003 at 03:44:21AM -0500, Gnophone Support wrote: > Hello, and thank you for registering at gnophone.com. Your login > information is listed below: > > Username: miernik > Password: ******* > IAX Phone Number: 17002916107 > > Please login as soon as possible to > http://x.linux-support.net/directory/ to complete the

Hi, I'm looking for a mean to send digital data over an E1 line, just like isdn4linux or Capi via AVM's FritzCard is able to do it with BRI lines (e.g. for PPP or ISDN raw connections). I'm not looking for modulated audio data representing digital data, like fax or the analogue modems of former times. I want an interface to the ISDN raw data, with an outgoing call marked as

Hello, i have asterisk with 2 internal isdn cards - handled by isdn4linux and i need to setup whol system like this route some call beggins with 0 or 00 - long distance through first card, route calls to mobile network via second card ( tehere is isdn gsm gateway connected).how i can do this using only isdn4linux (/dev/ttyi) ? regards Marian -- SUNTEQ s. r. o. Bojnicka cesta 35 # Prievidza

Hi, I try to use ISDN4Linux drivers with Asterisk. In modem.conf i put /dev/ttyIO. Everything is OK when i lauch asterisk but, when i call Asterisk nothing happen. Someone can help me ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030407/13e78d8e/attachment.htm

Hi, I am using Asterisk on a DSS1 ISDN-BRI with ISDN4Linux (and a Fritz Card PnP). The ISDN-BRI is in PTP-Mode (Point to Point "german: Anlagenanschluss") which is enabled within I4L with "hisaxctrl fcpcipnp0 7 1". Everything works fine except that I can not see the called number/MSN of incoming calls within Asterisk and because of this I can not route incoming calls

Hi! I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to have (short) answered before buying the DIVA card. I know there are several Eicon guys active on the list, thus I ask on the list instead of directly to Eicon so that all other will benefit as well. 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode? 2. Can the clock (master/slave) be configured independent

Greetings: I did some quick searching of my history of this list, and I tried a quick Google search as well, but perhaps someone on the list can quickly answer this question. I have a very nicely working Asterisk system at home with two Digium X100P FXO cards. When my SIP phones want to dial-out I have them setup to grab the first analog card (Zap/1) with the following extensions.conf segment: