similar to: Problems Calling Toll-free number

I'm using happily this cheap phones, but I still have a little problem. Configuring the phone is extremely easy on * and I've a couple of them perfectly working, except when i try to call some toll-free number (in italy 800xxxxxxx ). If the number called is an IVR system, often with GrandStream (but also with Cisco 7905.h323) it's impossible to make the menu choices via the Dialpad.

I need to configure an * box to connect to a primary * box which is attached to a PRI in order to make calls using both the same E1 connection. I know the best solution is to use IAX (altough i could connect the IP phones on the remote site directly to the main * box that is VPNed with the remote one). I've some doubt on how to config IAX to work in this situation. I think that: On the

Greetings, I need if possibile an explanation on how to manage the incoming callerid for an incoming call. Let me explain the situation: We have two different companies in this office that shares the same PBX (* box). Each company have its own number for the incoming calls. What i'd like to implement is something that, depending on the incoming line that is involved in the call, plays a

I've to project and build a fresh new box with * on. Basically, i'll have this situation: The office is connected to the phone carrier with a PRI. I need to let users continue to use their analog phones in a office, and an IP-phone based solution on the remote office, that will call using outside using the PRI on the first one. PRI---> Asterisk ---> Analog phones |

Greetings. Today I've installed a fresh new E100P on a EuroISDN PRI. It seems to work well, accepting calls, but, when I start *, I have the screen flooded with this message: PRI got event: 8 (or 6) If i look into /var/log/asterisk/messages i've this Error: File chan_zap.c, Line 5341 (zt_pri_error): PRI: Read on 35 failed: Unknown error 500 Repeated indefinitely. Also, i've a

I'm trying to transition from AMI to ARI. Running into a small hiccup when I try to create (originate a call) with the caller id name and number I can pass the Name and Number if the name has no spaces in it and it shows up in my PhonerLite application. curl -v -u asterisk:asterisk -X POST http://asterisk:astersk at localhost:8088/ari/channels/mycallerid.1?endpoint=PJSIP/1003 at

I understand how to control the first local channel, but an having trouble getting the second local channel to enter stasis. I setup have the following extensions.conf to handle 1000 (basically had it setup so if first stasis not there try second, but believe second channel never processes the dial plan so even if second line was hello-world2 it would not matter. [mycontext] exten =>

Hi Dan, as far as PPI and PAI Header, we use the channel Vars in order to do that. In Latest Asterisk you can set Channel vars within the create command in the Body. Just set the PJSIP(add,PAI) as you would do it in Dialplan. https://blogs.asterisk.org/2020/07/22/ari-create-channel-with-variables/ BR Jöran On Fri, Aug 7, 2020 at 7:06 PM Dan Cropp <dan at amtelco.com> wrote: > An

Hi Dan, i would do something like this (it is not a copy of what we are doing but an example of how i would do it) Important here is the "--data" and "-H" Option as well as the "variables" section within the Body. I added the callerid function here as well as it is the sample in the asterisk wiki. curl -v -H "Content-Type: application/json" -u

--- listas iPfone <listas@ipfone.com.br> wrote: > Hi all > > I need to know if the video support for h.263 is > active in version stable > 1.0.7 to use with eyeBeam in asterisk it works for me... [2222] type=friend secret=xxxx auth=md5 callerid="myCallerId" <2222> canreinvite=no host=dynamic disallow=all context=default allow=alaw allow=ulaw allow=speex

An additional follow-up question, if I need to set the P-Asserted-Identity on the create (originate), is there a way to do this with ARI? From: asterisk-users <asterisk-users-bounces at lists.digium.com> On Behalf Of Dan Cropp Sent: Friday, August 7, 2020 11:51 AM To: 'asterisk-users at lists.digium.com' <asterisk-users at lists.digium.com> Subject: [asterisk-users] With ARI,

Hi Jöran, Would it be possible to see an example using curl of how you are passing the PAI Header through ARI create? Dan From: asterisk-users <asterisk-users-bounces at lists.digium.com> On Behalf Of Jöran Vinzens Sent: Friday, August 7, 2020 12:10 PM To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> Subject: Re: [asterisk-users] With

I am looking for a SIP Soft Video phone, which I can use with Asterisk. If you have one installed (regardless if free or purchased) please tell me which one, the settings in Asterisk and your experience with it. bye Ronald

Hi Dan, i did it wrong, sorry: curl -v -H "Content-Type: application/json" -u asterisk:asterisk -X POST " http://localhost:8088/ari/channels/newChannelId" <http://localhost:8088/ari/channels/1400609726.3/play?media=sound:hello-world> --data '{ "endpoint": "SIP/Alice", "variables": { "CALLERID(name)": "Alice" ,

Hello! I want to change call files, which has caller id in them, to call originate from dial plan. But I don't see such parameter here https://wiki.asterisk.org/wiki/display/AST/Asterisk+11+Application_Originate How can I pass callerid to following: exten => 6003,n,Originate(SIP/6003 at asterisk,app,meetme,"6003,x") Thank you!

Is there any way to run asterisk without a fxo card? I am looking only run SIP and a single fxs card.

Hello, I'm trying to understand why when I make a call from a SIP phone to an external number who has an IVR system in which I've to choose some options using the dialpad, it does'nt recognise the key pressed and remains still waiting for my choose. I'm tryng using Grandstream 102, and i've tryed with all the 3 modes possibile: Dtmf inband, rfc2833 and INFO (obviously

I have been fighting with the ability to set the caller ID when I make outbound calls via a PRI line as well as via my SIP provider. The more I play around the less I understand. There is a setting in chan_dahdi.conf that seems to say do not pay attention to the CALLERPRES value and just allow the ID to be set. This setting is usecallingpres. If this is set to yes then the value of CALLERPRES

Hello, This morning I just started to have this problem calling from a SIP phone to a regular phone, using one of the 4 BRI cards (passive) I've in my * box. It calls regularly, but somewhere after 8-10 secs, it random hangups, or it hangups immediately after a hold, and so. I've looked into /var/log/asterisk/messages, and this is the output corresponding to the hangup: ##### Jul 30

Hello all, I'm becoming mad in trying to solve that issue. If I make a call from any of the phone here (I have some Grandstream and a couple of Snom105 - quite one of the best phones i've ever seen, this last one), to an outside IVR system, if i try to send dtmf to choose one of the IVR options, i notice in the /log/asterisk/messages this line: WARNING[43028]: Discarding too big frame