similar to: X100P question about odd behavior

Hi, I'm no phone guy but I've been having quite a bit of fun messing with Asterisk. I just unwrapped my new Wildcard TDM400P (TDM40B) which is the new 4 port FXS PCI card. It has 4 RJ45 connectors and I'd like to hookup 4 regular phones which are RJ11. If I crip RJ45 connectors to the phone cords do I simple use the center two pins (pins 4 and 5)? Thanks, Randy Smith Tiger

Hi All... Is it possible to cause asterisk to answer some distinctive ring patterns but not others? I have a POTS line plugged into an X100P and I would like * to ignore one ring cadence that is answered by a fax machine. How would I do that? Thanks...

I'm a complete Asterisk novice and have an installation based on the Asterisk@HomeCD. I've installed my TDM400P with 2 x FXO & 2 x FXS, but every time I try to dial out, I get a message "No circuits available". Can someone confirm the pinouts for connecting the FXO's to a UK BT Line - I have RJ11 connectors on the back of my TDM400P card, so ideally I'd like to

<div><BR>Hello,</div> <div>&nbsp;I bought a TDM400P, and intended to use it with my analog phone, which is RJ11 ofcourse. So, the question now, how do I plug in my RJ11 phone to the TDM400P card, which has an RJ45 interface? Also, since it's an 11B card, I also intend to bring in an analog line into the RJ45, so i am still left with the same question....how do I go

Sauda??es. Como que se faz um conector RJ45 em uma ponta e RJ11 e outra. Pretendo conectar a linha de um ATA em uma placa Khomp KFXO IP. A ponta que tem o conector RJ45 est? crimpada com a sequencia 568B e vai ser conectada na placa Khomp, mas a ponta RJ11 eu n?o sei como deve ficar. Li alguns manuais na internet mas n?o entendi ao certo como tem que ser feito. -- Att.* *** Luis H. Forchesatto

Ahhh this could be my problem! I just checked which wires on the RJ11 cable had a voltage across them and it was the yellow and green (3 & 4?). From what someone posted the other day it's supposed to be Bumble Bee and Christmas Tree. I did have to get a technician out to fix my line when it was first installed because it was dead. Maybe he wired it up incorrectly or maybe they just do it

Dear all, I am happy to tell you that I received a Digium's TDM20B card for my Asterisk box today. but the phone jack is RJ45 instead of RJ11. So Please I need precise instructions to connect a phone to this card. please, assume that I have a phone (a normal analouge phone connected to the one end of a cable with an RJ11 jack (at the phone side). and now I want to connect the other end to the

Hello all, I have a question. I have an asterisk box setup with an x100p card installed. I have about 3 VoIP phones connected to it. The x100p is connected to my pots line. I also have regular phones connected the the pots line as well like most normal people would. When I get an incomming call all the regular phones ring and my VoIP phones ring. This is good. My question is this. Say

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I've got my developers kit from telappliant and got a machine up and running to become the house phone system. Most things are working now, such as incoming calls, call transfer, call parking, voicemail, etc. The one thing I can't do is make my analog phone ring! I can see the call coming in on the asterisk console and can then pick

We currently have a 15-phone system using Asterisk, a combination of analog phones/Grandstream HandyTone-286 and Grandstream BT101s, and 4 X100Ps connected to analog lines. The system works well except for the occasional echo problem. I have all the echo parameters configured, removed all the extra incoming analog lines except to the PBX, etc. following all the advice on the wiki and on the

Noob here, my apologies in advance. Recently my employer decide to stop paying for my home POTS line, so I ordered packet8 for a home line instead of another POTS line, since I really dislike my local phone company, and the POTS line without any long distance would cost more than the $20 to packet8 with unlimited US calling. Anyway, this whole thing got me started thinking about VOIP a lot

Not sure if anyone experienced the same - or if anyone ever connected a POTS phone to the "Phone" jack on an X100P card. The POTS phone rings normally when the FXO receives a call. The POTS phone can also make outgoing calls when FXO is not holding the line. This is desired. But if a call connected to the POTS phone lasts longer than a couple of minutes, Asterisk would receive

Hi All... I have an Asterisk 0.7x server running and have forever now. I would like to upgrade it to 1.0 (or whatever the current version is). It's running on Linux. I have been told there is now a Debian package for Asterisk on Sarge! I was looking at the Asterisk web site and I noticed that the Wildcard X100P cards are deprecated. I am using two of these cards to interface to POTS

I have an X100P used, at present, largely for outgoing calls. It shares the single incoming POTS line with a number of analog phones. Is it possible to talk the X100P (Zap/1) to answer a ringing call only if I ask it to? I'd like to use only the SIP phone in my office, but let the analog phones continue to work in the rest of the house (until I can afford FXS cards anyway..) I can force

I finally got my X100P working and now I have a question. I have several Skutch phone line simulators. My X100P works as expected with both a POTS line and an analog PBX port, but when I use a phone line simulator it doesn't answer the line. The phone line simulator doesn't power the line until the phone set goes offhook. Asterisk shows the RED alarm and then the alarm clearing but never

I know the X100P cards are not supported by Digium any more, but for home office use, are they still acceptable? I have two POTS lines, one residential and one business line comming into the house. I'd like to get both into my * server and $15 total compared to > $100 for the newer TDMxxx card sure is desirable. Having said that, will the sound quality, functionality, stability, etc. be as

Hi Does anybody if the X100P works in Switzerland? We can't get a line to PSTN. When I run zttool it shows me always a red alert. I can make and receive calls with an anlog phone plugged in the phone connector. I've compiled and configured the card according to the wiki. Everything seemed to be ok. Is there a way to debug this? Regards Reto

Hello. All. I am a bit new to asterisk, started from half a month ago. I am setting up a home asterisk server with analog card. I am using asterisk 1.4.27. At the moment, I bought a X100P card and installed it on my computer. I used it to connect my home phone line. For the moment, it works fine when dial in. Soon I noticed when I dial out through it to my mobile, it can't hang up

Hello, After much searching of voip-info.org and google, I'm finally giving in and asking the list. The setup I have is this:- Single X100P card in a Debian system Inbound/Outbound POTS line connects to the X100P Sipura 2000 and Budgetone 100 on the LAN 1 Cordless and one conventional phone connected to the sipura Account on Stanaphone.com for eitherbound SIP calls. (I have other SIP

Hi.. I've got an asterisk setup with an X100P card installed.. I'm noticing that upon hangup, it takes a good 3 to 5 seconds before asterisk realizes the line has been hung up and drops the call.. this causes my SIP phone to continue ringing, and occassional phantom voice mail messages to be left.. I'm located in good old standard North America, with a regular Verizon residential