similar to: CentOS 4.2 with LSI MRSATA300-8X?

I need to do a new CentOS net install on a new server having the Supermicro X7DVL-3 motherboard: http://www.supermicro.com/products/motherboard/xeon1333/5000V/X7DVL-3.cfm Based on that info I assume the board having a "8x SAS Ports via LSI 1068E Controller". We received the server with 3 drives + 1 spare as hw RAID-5 preinstalled. During bootup I see that the drives are initialised

On 05/01/2015 15:14, Philippe BOURDEU d'AGUERRE wrote: > Happy new year ! > > We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. > > Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't > initialize at boot. Reverting to kernel 2.6.32-431 allows server to > boot fine. > I have a similar system, and don't have your problem: #

Hi to all I have a supermicro server with LSI 3108 with - 2x300GB SAS spin drive in raid1 (virtual drive 0) - 2x300GB SAS spin drive in raid1 (virtual drive 1) - 2x200GB Intel SSD DC S3710 drives configured as JBOD in LSI bios In the IPMI storage health status eveything looks fine until I boot into Centos 7.1 (unfortunatelly I didn't try other OS, but also I'm not interested in other)

On 08/18/2016 02:17 AM, Fawzy Ibrhim wrote: > I totally agree with John; NEC sold these servers with fakeraid from LSI as I used to login to LSI Firmware to manage the RAID disks. The NEC compatibility page at http://www.nec.com/en/global/prod/express/linux/centos.html indicates that the R120b2 is not certified for CentOS 7. CentOS 5 and 6, yes, but not 7. As there are other servers

In my experience the mass market HBAs and RAID cards typically do support only 8 or 16 drives. For the internal variety in a standard rack-mount server you'll usually see either 2 or 4 iPass cables (each of which support 4 drives) connected to the backplane. The marketing material you've referenced has a white lie in it: supporting more than 16 drives on a single card is very likely only

That's weird, because starting with 6.6 we could finally ditch inserting kmods at installation time, the new kernel in 6.6 supported everything. I believe the model we have (among others) is 9341-4i; I would imagine it's pretty similar with what you have. You should open perhaps a bugzilla issue with redhat about this. Lucian -- Sent from the Delta quadrant using Borg technology! Nux!

Everyone, I am trying to install a Centos 6.0 system on a SuperMicro with an LSI MegaRaid SCSI 320-2 controller. I had originally tried to install 6.4, but the 6.4 install DVD does not boot with this configuration. See : http://bugs.centos.org/view.php?id=5377 Fortunately, the 6.0 install DVD worked fine until it failed to identify the hard disc controller. I checked the lsi.com site which

Le 05/01/2015 16:14, Philippe BOURDEU d'AGUERRE a ?crit : > > We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. > > Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't > initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot > fine. > > The server can't boot due to a bug in LSI megaraid module. Boot log ends

Dear list, I have inherited a CentOS-5 box with a LSI Sata Raid controller. It is configured as a RAID5 w/hot-standby. My concern is that I have no present means of determining the RAID status w/o downing the system and going into the bios to get status. If a disk has failed and brought the standby disk online, I would like to know about it, the day it happens by seeing it in syslog or getting

Hey, anyone using an LSI MegaRAID experienced "disappearing drives"...? We installed 6 new C6 servers, each with a Supermicro SMC2108 (LSI MegaRAID) controllers and 3 PX-128M5Pro SSDs ( RAID1 + hostswap). 2 weeks (and almost no activity on it, since not in production, apart from installation) later, megacli sees (based on the slot numbers): - on one server: only the 2nd disk of the RAID

On 8/30/2015 4:59 AM, Adrian Sevcenco wrote: > On 08/30/2015 12:02 PM, Mike Mohr wrote: >> In my experience the mass market HBAs and RAID cards typically do support >> only 8 or 16 drives. For the internal variety in a standard rack-mount >> server you'll usually see either 2 or 4 iPass cables (each of which support >> 4 drives) connected to the backplane. The

On 11/05/2016 06:40 AM, Steven Tardy wrote: > What firmware is/are on the cards? In the dmesg output I included: mpt3sas0: LSISAS3008: FWVersion(10.00.00.00), ChipRevision(0x02), BiosVersion(08.25.00.00) > The driver version difference between C6 and C7 could interact badly with old firmware. I suspected that was the case, and tried running elrepo's "kmod-mpt3sas" from

Can anyone tell me which versions of CentOS/kernel support the LSI 2008 SAS chipset, as used in the Supermicro X8DT6-F motherboard? It's billed as a "hardware RAID" controller. Is this real RAID or fake RAID? I will be having two hard drives in a mirrored configuration. I usually use MD software RAID1, mirroring at the partition level. Would this still be best with this chipset, or

On Sat, Sep 19, 2020 at 8:04 PM William Markuske <wmarkuske at gmail.com> wrote: > > Hello, > > I've recently been given domain over a number of supermicro storage > servers using Broadcom / LSI SAS2004 PCI-Express Fusion-MPT SAS-2 > [Spitfire] (rev 03) to run a bunch of SSDs. I was attempting to do fresh > installs of CentOS 8 and have come to find out that RedHat

On 20/09/2020 04:16, Akemi Yagi wrote: > On Sat, Sep 19, 2020 at 8:04 PM William Markuske <wmarkuske at gmail.com> wrote: >> >> Hello, >> >> I've recently been given domain over a number of supermicro storage >> servers using Broadcom / LSI SAS2004 PCI-Express Fusion-MPT SAS-2 >> [Spitfire] (rev 03) to run a bunch of SSDs. I was attempting to do

Hi, is there a driver disk available for the LSI 1064e SAS controller, operating in software raid mode? This Controler is installed on the Intel SR1500ALSAS for example, and named here Intel Embedded Software RAID II. I found drivers for RHEL4 and SUSE 10, but not for CentOS5? If I disable SAS Software-RAID in BIOS the system finds /dev/sda and /dev/sba and loads the mptsas drivers. But the

I'm trying to install CentOS 5.4 on a machine with a LSI SAS 1068E controller. I've googled all over the place and found a few different drivers for RHEL5 for it.. and tried a few of them.. Some will load, some complain that this isn't the correct version.. non of them work when it comes to showing Hard Drivers in the partition manager. The machine is a Supermicro SYS-6015V-M3

On 1/5/2015 7:14 AM, Philippe BOURDEU d'AGUERRE wrote: > > Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't > initialize at boot. Reverting to kernel 2.6.32-431 allows server to > boot fine. works here fine on the 9261, which is an OEM version of the same card with the connectors in a different orientation... you might check your LSI firmware revision.

Hello, I've recently been given domain over a number of supermicro storage servers using Broadcom / LSI SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) to run a bunch of SSDs. I was attempting to do fresh installs of CentOS 8 and have come to find out that RedHat deprecated support for a number of HBAs for 8 including all running the SAS2004 chip. Does anyone know if there is a

Happy new year ! We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot fine. The server can't boot due to a bug in LSI megaraid module. Boot log ends by a lot of lines: RESET_GEN2: retry=xxx, hostdiag=a4 I tried Centos 6.6