Hi to all
I have a supermicro server with LSI 3108 with
- 2x300GB SAS spin drive in raid1 (virtual drive 0)
- 2x300GB SAS spin drive in raid1 (virtual drive 1)
- 2x200GB Intel SSD DC S3710 drives configured as JBOD in LSI bios
In the IPMI storage health status eveything looks fine until I boot into
Centos 7.1 (unfortunatelly I didn't try other OS, but also I'm not
interested in other)
After boot the status for the SSDs changing in ERROR
The same thing happen when boot with the install CD
Otherwise everything works fine.
Is this hurt? Can I do something?
Also I tried to install the latest LSI driver (06.809.18.00), but seems
it is not loaded after restart:
As the official driver install guide say, before the driver install, I
installed the dkms from the epel repo.
/var/log/messages:
systemd-modules-load: Failed to find module 'override megaraid_sas
3.10.* weak-updates/megaraid_sas'
/etc/modules-load.d/megaraid_sas.conf:
override megaraid_sas 3.10.* weak-updates/megaraid_sas
#modinfo megaraid_sas
filename:
/lib/modules/3.10.0-229.14.1.el7.x86_64/kernel/drivers/scsi/megaraid/megaraid_sas.ko
description: LSI MegaRAID SAS Driver
author: megaraidlinux at lsi.com
version: 06.805.06.01-rh2
license: GPL
rhelversion: 7.1
srcversion: C0124BBE9453A621D4086DB
alias: pci:v00001000d0000005Fsv*sd*bc*sc*i*
alias: pci:v00001000d0000005Dsv*sd*bc*sc*i*
alias: pci:v00001000d0000002Fsv*sd*bc*sc*i*
alias: pci:v00001000d0000005Bsv*sd*bc*sc*i*
alias: pci:v00001028d00000015sv*sd*bc*sc*i*
alias: pci:v00001000d00000413sv*sd*bc*sc*i*
alias: pci:v00001000d00000071sv*sd*bc*sc*i*
alias: pci:v00001000d00000073sv*sd*bc*sc*i*
alias: pci:v00001000d00000079sv*sd*bc*sc*i*
alias: pci:v00001000d00000078sv*sd*bc*sc*i*
alias: pci:v00001000d0000007Csv*sd*bc*sc*i*
alias: pci:v00001000d00000060sv*sd*bc*sc*i*
alias: pci:v00001000d00000411sv*sd*bc*sc*i*
depends:
intree: Y
vermagic: 3.10.0-229.14.1.el7.x86_64 SMP mod_unload modversions
signer: CentOS Linux kernel signing key
sig_key: E9:9F:C4:37:BD:9C:BF:B4:F1:B1:DA:87:C1:57:FF:66:56:9B:EE:66
sig_hashalgo: sha256
parm: lb_pending_cmds:Change raid-1 load balancing outstanding
threshold. Valid Values are 1-128. Default: 4 (int)
parm: max_sectors:Maximum number of sectors per IO command (int)
parm: msix_disable:Disable MSI-X interrupt handling. Default:
0 (int)
parm: msix_vectors:MSI-X max vector count. Default: Set by FW
(int)
parm: allow_vf_ioctls:Allow ioctls in SR-IOV VF mode. Default:
0 (int)
parm: throttlequeuedepth:Adapter queue depth when throttled
due to I/O timeout. Default: 16 (int)
parm: resetwaittime:Wait time in seconds after I/O timeout
before resetting adapter. Default: 180 (int)
parm: smp_affinity_enable:SMP affinity feature enable/disbale
Default: enable(1) (int)
Can somebody tell me how to get the driver to work?
Thanks,
--
Levi
