thr3ads.net - CentOS - [CentOS] Hardware raid LSI Megaraid not working since Centos 6.6 [Jan 2015]

If this information is useful, please help other people find it:
Share via:

Philippe BOURDEU d'AGUERRE

2015-Jan-05 15:14 UTC

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

Happy new year !

We have a SuperMicro server with a LSI MegaRAID 9260-4i controller.

Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't 
initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot 
fine.

The server can't boot due to a bug in LSI megaraid module. Boot log ends 
by a lot of lines:

RESET_GEN2: retry=xxx, hostdiag=a4

I tried Centos 6.6 install disk and it also fails to find disks but 
Centos 7 install disk boot fine.

It's annoying to be stuck at 2.6.32-431 kernel and I have no idea how to 
solve this issue :-(

Thanks for any help.
-- 
Philippe BOURDEU d'AGUERRE
AIME - Campus de l'INSA                  http://www.aime-toulouse.fr/
135 av. de Rangueil	 		 T?l +33 561 559 885
31077 TOULOUSE Cedex 4 - FRANCE 	 Fax +33 561 559 870

Giles Coochey

2015-Jan-05 15:22 UTC

head link

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

On 05/01/2015 15:14, Philippe BOURDEU d'AGUERRE
wrote:> Happy new year !
>
> We have a SuperMicro server with a LSI MegaRAID 9260-4i controller.
>
> Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't 
> initialize at boot. Reverting to kernel 2.6.32-431 allows server to 
> boot fine.
>I have a similar system, and don't have your problem:

# uname -rv
2.6.32-504.3.3.el6.x86_64 #1 SMP Wed Dec 17 01:55:02 UTC 2014
# dmesg | grep LSI
scsi4 : LSI SAS based MegaRAID driver
scsi 4:2:0:0: Direct-Access     LSI      MR9260-4i        2.13 PQ: 0 ANSI: 5
Copyright (c) 1999-2008 LSI Corporation
# dmesg | grep Supermicro
DMI: Supermicro X8DTU/X8DTU, BIOS 2.1b       12/30/2011


> The server can't boot due to a bug in LSI megaraid module. Boot log 
> ends by a lot of lines:
>
> RESET_GEN2: retry=xxx, hostdiag=a4
>
> I tried Centos 6.6 install disk and it also fails to find disks but 
> Centos 7 install disk boot fine.
>
> It's annoying to be stuck at 2.6.32-431 kernel and I have no idea how 
> to solve this issue :-(
>
> Thanks for any help.

-- 
Regards,

Giles Coochey, CCNP, CCNA, CCNAS
NetSecSpec Ltd
+44 (0) 8444 780677
+44 (0) 7584 634135
http://www.coochey.net
http://www.netsecspec.co.uk
giles at coochey.net

Philippe BOURDEU d'AGUERRE

2015-Jan-05 15:36 UTC

head link

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

Le 05/01/2015 16:22, Giles Coochey a ?crit :> I have a similar system, and don't have your problem:
>
> # uname -rv
> 2.6.32-504.3.3.el6.x86_64 #1 SMP Wed Dec 17 01:55:02 UTC 2014
> # dmesg | grep LSI
> scsi4 : LSI SAS based MegaRAID driver
> scsi 4:2:0:0: Direct-Access     LSI      MR9260-4i        2.13 PQ: 0
> ANSI: 5
> Copyright (c) 1999-2008 LSI Corporation
> # dmesg | grep Supermicro
> DMI: Supermicro X8DTU/X8DTU, BIOS 2.1b       12/30/2011
For me:

# uname -rv
2.6.32-431.29.2.el6.x86_64 #1 SMP Tue Sep 9 21:36:05 UTC 2014
# dmesg | grep LSI
scsi4 : LSI SAS based MegaRAID driver
scsi 4:2:0:0: Direct-Access     LSI      MR9260-4i        2.13 PQ: 0 ANSI: 5
# dmesg | grep Supermicro
DMI: Supermicro H8DGU/H8DGU, BIOS 3.0b       05/07/2013

-- 
Philippe BOURDEU d'AGUERRE
AIME - Campus de l'INSA                  http://www.aime-toulouse.fr/
135 av. de Rangueil	 		 T?l +33 561 559 885
31077 TOULOUSE Cedex 4 - FRANCE 	 Fax +33 561 559 870

John R Pierce

2015-Jan-05 18:10 UTC

head link

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

On 1/5/2015 7:14 AM, Philippe BOURDEU d'AGUERRE
wrote:>
> Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't 
> initialize at boot. Reverting to kernel 2.6.32-431 allows server to 
> boot fine. 
works here fine on the 9261, which is an OEM version of the same card 
with the connectors in a different orientation...  you might check your 
LSI firmware revision.

# uname -rv
2.6.32-504.1.3.el6.x86_64 #1 SMP Tue Nov 11 17:57:25 UTC 2014

# cat /etc/redhat-release
CentOS release 6.6 (Final)

# dmesg |grep LSI
mpt2sas0: LSISAS2008: FWVersion(14.00.01.00), ChipRevision(0x03), 
BiosVersion(07.27.00.00)
scsi 0:0:1:0: Enclosure         LSI CORP SAS2X28          0717 PQ: 0 ANSI: 5
scsi1 : LSI SAS based MegaRAID driver
scsi 1:0:8:0: Enclosure         LSI CORP SAS2X36          0717 PQ: 0 ANSI: 5
scsi 1:2:0:0: Direct-Access     LSI      MR9261-8i        2.12 PQ: 0 ANSI: 5
scsi 1:2:1:0: Direct-Access     LSI      MR9261-8i        2.12 PQ: 0 ANSI: 5
scsi 1:2:2:0: Direct-Access     LSI      MR9261-8i        2.12 PQ: 0 ANSI: 5

# /opt/MegaRAID/MegaCli/MegaCli64 -ShowSummary -aAll

System
         Operating System:  Linux version 2.6.32-504.1.3.el6.x86_64
         Driver Version: 06.803.01.00-rh1
         CLI Version: 8.02.16

Hardware
         Controller
                  ProductName       : LSI MegaRAID SAS 9261-8i(Bus 0, Dev 0)
                  SAS Address       : 500605b003bbef10
                  FW Package Version: 12.12.0-0046
                  Status            : Need Attention
         BBU
                  BBU Type          : iBBU
                  Status            : Remaining Capacity is Low
         Enclosure
                  Product Id        : SAS2X36
                  Type              : SES
                  Status            : OK

                  Product Id        : SGPIO
                  Type              : SGPIO
                  Status            : OK
......


-- 
john r pierce                                      37N 122W
somewhere on the middle of the left coast

Philippe BOURDEU d'AGUERRE

2015-Jan-06 09:36 UTC

head link

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

Thank you for your help.

Le 05/01/2015 19:10, John R Pierce a ?crit :> works here fine on the 9261, which is an OEM version of the same card
> with the connectors in a different orientation...  you might check your
> LSI firmware revision.
My firmware seems to be more up to date. Anyway, I will try to update 
firmware. I have to check how to do that.

# dmesg |grep LSI
scsi4 : LSI SAS based MegaRAID driver
scsi 4:2:0:0: Direct-Access     LSI      MR9260-4i        2.13 PQ: 0 ANSI: 5
# /opt/MegaRAID/MegaCli/MegaCli64 -ShowSummary -aAll

System
	Operating System:  Linux version 2.6.32-431.29.2.el6.x86_64
	Driver Version: 06.700.06.00-rh1
	CLI Version: 8.07.14

Hardware
         Controller
                  ProductName     : LSI MegaRAID SAS 9260-4i(Bus 0, Dev 0)
                  SAS Address       : 500605b008a30fc0
                  FW Package Version: 12.14.0-0167
                  Status            : Optimal
         BBU
                  BBU Type          : iBBU
                  Status            : Healthy
         Enclosure
                  Product Id        : SGPIO
                  Type              : SGPIO
                  Status            : OK
.
.
.
-- 
Philippe BOURDEU d'AGUERRE
AIME - Campus de l'INSA                  http://www.aime-toulouse.fr/
135 av. de Rangueil	 		 T?l +33 561 559 885
31077 TOULOUSE Cedex 4 - FRANCE 	 Fax +33 561 559 870

Philippe BOURDEU d'AGUERRE

2015-Jan-14 13:16 UTC

head link

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

Le 05/01/2015 16:14, Philippe BOURDEU d'AGUERRE a ?crit
:>
> We have a SuperMicro server with a LSI MegaRAID 9260-4i controller.
>
> Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't
> initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot
> fine.
>
> The server can't boot due to a bug in LSI megaraid module. Boot log
ends
> by a lot of lines:
>
> RESET_GEN2: retry=xxx, hostdiag=a4
>
> I tried Centos 6.6 install disk and it also fails to find disks but
> Centos 7 install disk boot fine.
>
> It's annoying to be stuck at 2.6.32-431 kernel and I have no idea how
to
> solve this issue :-(
>
My workaround is to install kernel-lt from elrepo repository. It seems 
to work well.

# uname -rv
3.10.64-1.el6.elrepo.x86_64 #1 SMP Fri Jan 9 10:40:17 EST 2015

-- 
Philippe BOURDEU d'AGUERRE
AIME - Campus de l'INSA                  http://www.aime-toulouse.fr/
135 av. de Rangueil	 		 T?l +33 561 559 885
31077 TOULOUSE Cedex 4 - FRANCE 	 Fax +33 561 559 870

Sorin Srbu

2015-Jan-14 13:42 UTC

head link

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

> -----Original Message-----
> From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On
> Behalf Of Philippe BOURDEU d'AGUERRE
> Sent: den 14 januari 2015 14:16
> To: centos at centos.org
> Subject: Re: [CentOS] Hardware raid LSI Megaraid not working since Centos
> 6.6
> 
> Le 05/01/2015 16:14, Philippe BOURDEU d'AGUERRE a ?crit :
> >
> > We have a SuperMicro server with a LSI MegaRAID 9260-4i controller.
> >
> > Since Centos 6.6 update (kernel 2.6.32-504), the controller
doesn't
> > initialize at boot. Reverting to kernel 2.6.32-431 allows server to
boot
> > fine.
> >
> > The server can't boot due to a bug in LSI megaraid module. Boot
log ends
> > by a lot of lines:
> >
> > RESET_GEN2: retry=xxx, hostdiag=a4
> >
> > I tried Centos 6.6 install disk and it also fails to find disks but
> > Centos 7 install disk boot fine.
> >
> > It's annoying to be stuck at 2.6.32-431 kernel and I have no idea
how to
> > solve this issue :-(
> >
> 
> My workaround is to install kernel-lt from elrepo repository. It seems
> to work well.
> 
> # uname -rv
> 3.10.64-1.el6.elrepo.x86_64 #1 SMP Fri Jan 9 10:40:17 EST 2015
When I tinkered with CentOS and one of those LSI-cards a while ago, CentOS
couldn't find the card until the card's BIOS was flashed with the latest
firmware available at the time.
After the flash, the CentOS stock-kernel found the card out-of-the-box.

YMMV though.
--
//Sorin

Nux!

2015-Jan-14 13:43 UTC

head link

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

That's weird, because starting with 6.6 we could finally ditch inserting
kmods at installation time, the new kernel in 6.6 supported everything.
I believe the model we have (among others) is 9341-4i; I would imagine it's
pretty similar with what you have.
You should open perhaps a bugzilla issue with redhat about this.

Lucian

--
Sent from the Delta quadrant using Borg technology!

Nux!
www.nux.ro

----- Original Message -----> From: "Philippe BOURDEU d'AGUERRE" <bda at
aime-toulouse.fr>
> To: centos at centos.org
> Sent: Wednesday, 14 January, 2015 13:16:07
> Subject: Re: [CentOS] Hardware raid LSI Megaraid not working since Centos
6.6
> Le 05/01/2015 16:14, Philippe BOURDEU d'AGUERRE a ?crit :
>>
>> We have a SuperMicro server with a LSI MegaRAID 9260-4i controller.
>>
>> Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't
>> initialize at boot. Reverting to kernel 2.6.32-431 allows server to
boot
>> fine.
>>
>> The server can't boot due to a bug in LSI megaraid module. Boot log
ends
>> by a lot of lines:
>>
>> RESET_GEN2: retry=xxx, hostdiag=a4
>>
>> I tried Centos 6.6 install disk and it also fails to find disks but
>> Centos 7 install disk boot fine.
>>
>> It's annoying to be stuck at 2.6.32-431 kernel and I have no idea
how to
>> solve this issue :-(
>>
> 
> My workaround is to install kernel-lt from elrepo repository. It seems
> to work well.
> 
> # uname -rv
> 3.10.64-1.el6.elrepo.x86_64 #1 SMP Fri Jan 9 10:40:17 EST 2015
> 
> --
> Philippe BOURDEU d'AGUERRE
> AIME - Campus de l'INSA                  http://www.aime-toulouse.fr/
> 135 av. de Rangueil	 		 T?l +33 561 559 885
> 31077 TOULOUSE Cedex 4 - FRANCE 	 Fax +33 561 559 870
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos

Apparently Analagous Threads

Search for more maybe matching threads

CentOS - Jan 2015 - Hardware raid LSI Megaraid not working since Centos 6.6

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

[CentOS] Hardware raid LSI Megaraid not working since Centos 6.6

Apparently Analagous Threads