similar to: Is this a problem with pxelinux or a Soekris bios?

Hello - I've been running Asterisk (quite happily!) for several years now using a Digium TDM400P card in an old Linux box (P4 1.6 w/ 256MB RAM). I'm also running another old PC running m0n0wall as a firewall. Between these two boxes, that run 24x7, I'm drawing a lot more power than needed and hoping to make a dent in my monthly electric bill by consolidating the two into a single box

Hello, Freebsd-stable. I installed 7.1-STABLE on my new Soekris net5501. Kernel config is in attach. This unit lock up in strange way every day. It is pingable, but no access to host on any network protocol (sshd, named, etc are not answering), and serial console (only one this unit has) DOESN'T ANSWER too! Only way to un-freeze it is cold reboot. I've thought, it is

Hi, I'm relatively new to Asterisk, and I'm looking to build a tiny system for home use. For context, at home I've got a line from Vonage (last I heard, they won't give out SIP credentials and let you use random hardware/software), which comes out as an analog line with a dialtone, and I'll be treating that as if it were a regular PSTN connection. I also work from home,

Dear all, I'm trying to boot a recent PXELINUX on a brand new Soekris net4501 (comBIOS 1.33). This combination appears to not work out of the box... I see much advice floating around from a few years ago, hinting that earlier versions of PXELINUX might have worked. However before resorting to archaeology I'd be interested in feedback from others who might have got through this. I

Hi recently bought a soekris net5501 and a tdm410 to place in there. I am having some issues attaching 12V power to the card via the molex card - basically the box for the motherboard is too small. I have read up about a PWR2400b and it seems to use 2wire pin, I am guessing to connect to P8 just behind the molex connector on the tdm410. can any one here confirm this, or have any info on the

Hi. I am trying to use EXTLINUX 3.08 to boot a Soekris net4801 from a CompaqFlash card. BIOS reports the CF card as the first master harddisk. During boot/load the loader hangs after this output: EXTLINUX 3.08 2005-05-19 PXELINUX and LILO works fine on the same setup It this a general problem with Soekris/net4801 and EXTLINUX? Regards Johan Linn?r

Hey, I have a problem booting certain machines with pxelinux. I have pxelinux.0 in the root of my tftp server and dhcp pointing to the right location: # dhcpd.conf authoritative; option domain-name "example.net"; ddns-update-style none; default-lease-time 3600; max-lease-time 86400; subnet 10.0.0.0 netmask 255.255.255.0 { range 10.0.0.3 10.0.0.20; server-name

Hi all, I have a Soekris net4801-50 board with OpenBSD 3.9 where I've configured a dhcp server and tested it with a regular PC connected directly via a crossover cable with success. The problem comes when I try to connect my IAXy device instead of the PC. I can see with 'tcpdump -nettti sis1' that the IAXy isn't sending any packets to the dhcp server. I thought my IAXy was bad

Has anyone on the list used a Soekris engineering PC as a TDM - Ethernet bridge? For example something like a net4801 with a TE110p in it and then using TDMoE to get it into a bigger server where the call processing proper will occur. Anyone know if it might handle a quadspan card ok? (no transcoding, just pure PRI to TDMoE bridging). Craig

* H. Peter Anvin, 2014-06-10 : > You probably want to test both pxelinux.0 and lpxelinux.0... if it is > sticking in pxe_init_isr you're using the latter. Correct. And indeed pxelinux.0 goes much further than lpxelinux.0! I have a few issues yet to fix: * Undef symbol FAIL: __syslinux_debug_enabled (I must have done something wrong while building) * find proper fix for

I'm very happy to announce the first stable version of my little creation: Miruna Asterisk System. This version run only on Soekris 4801 board, but I think if we change kernel run on other boards:) You can download it at: http://sourceforge.net/projects/miruna-asterisk/ In next days I'll setup a wiki and a forum to help/documentation/bugs. Sorry for horrible doc (now), I'm writing

Hi All, I have a Soekris 4801 running Asterisk and I tried to add a X100P FXO card only to find that the Soekris will not boot with the card installed. The LEDs flash for a second and then nothing, it does not boot. I've tried 2 different X100p cards, both of which work in a regular desktop system, and still have no luck. I tried a different Soekris 4801 with no luck. I've also tried a

Hi, Unfortunately this approach isn't going to work. I've done some further research and it would appear that it is the underlying ugen device and not libusb that is failing to honor the timeout. https://mail-index.netbsd.org/tech-misc/2006/03/17/0000.html The person above worked around this by having the device opened in non blocking mode using the O_NONBLOCK flag but this required

Hi group, i'm brand new and i would like to ask about soekris hardware. I read along the web but i have some doubts that i think can be solved here. My question are the following: 1) does the Digium TDM400P fit in the soekris box with a 4801 SBC or a bigger box is needed? Any suggestions about where to pick up another box? 2) does the Digium TDM100P (already discontinued) fits fine in a

I'm considering that board as a mail and voip gateway for home use. In view of all those statements about how little resources asterisk needs, did anybody already try running asterisk on it? Thanks, Bruno.

Hi, I'm having an issue with a soekris net4801 board and a S101i "IAXy" device. When I connect a successfully provisioned IAXy directly via a crossover cable into an ethernet port of the soekris, the link led turns on orange so i'ts 10Mb and the activity led blinks like if there is some action going on but when I try 'tcpdump -nettti sis1' I see nothing going on, no

I'm working with a Soekris net45xx SBC and I'm experiencing problems using any syslinux code (syslinux, pxelinux, extlinux) above version 2.20. I'm interfacing with the Soekris via the serial console port, which is the primary bios console. I've tried different configurations with setting serial in the config file, but no change (though I dont even thing it's getting to reading

hi hpa, etal I found a patch against 2.06 that turned off console when serial was in use. http://centerclick.org/net4801/pxelinux/syslinux.patch This patch works, but appears to turn off the console unconditionally. I went to see how it would fit in 2.11, and it seems youve already started adding this feature. If so great, but how do I control it from a config-file ? I didnt see any new

On Apr 6, 2015, at 8:46 AM, Richard Flint <richard.flint at gmail.com> wrote: > Unfortunately this approach isn't going to work. > > I've done some further research and it would appear that it is the underlying ugen device and not libusb that is failing to honor the timeout. > > https://mail-index.netbsd.org/tech-misc/2006/03/17/0000.html > > The person above

I try to use a linux on a soekris : http://www.soekris.com/net4801.htm . This is a tiny PC without screen nor keyboard. So i can use only a RS232 console. I can find some information on the use of lilo on this card with success (a modified debian). I have choose to use a mandrake then the mklivecd script to transforme it in .iso file (wich make it read only). I have create my own script to