similar to: Loading syslinux from a USB HDD

Displaying 20 results from an estimated 800 matches similar to: "Loading syslinux from a USB HDD"

2009 Nov 15
2
Trying to multiboot bartpe & puppy linux on a usb flash with syslinux
Hey list, I have an older 2005 Uniwill 259ia3 with a Phoenix bios. Flash booting is limited to keys 512 MB or less! Here's my setup recipe: used the HP utility v. 2.0.6 giving me this geometry ---------------- fdisk -l ----------- Disk /dev/sdb: 493 MB, 493879296 bytes 255 heads, 63 sectors/track, 60 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start
2006 Oct 18
1
Loading syslinux native from a USB HDD
Hi there guys! I want to set up Puppy-Linux to run off a 2GB USB key-drive in native mode (I.e. not as a virtual machine, which I'm finding runs too slow on my system, under XP.) To test it out, I want to run off a 150GB USB HDD. Now this drive is NTFS formatted and way bigger than the 1GB file structure limit that I read about in the Syslinux documentation. There's only one
2007 Aug 12
2
SYSLINUX-3.52-pre5: XP BOOTSEC.BIN Bug
I just encountered my only bug w/ the ISOLINUX+VESAMENU combination from 3.52-pre5. Updated a *working* CD project w/ the new ISOLINUX+VESAMENU combo just last week. Booting my preferred Linux distro (Slax-6) from my custom CDs work perfectly, however when I updated a CD project that includes BartPE/WinPE, BartPE fails to boot w/ 'CDBoot can not boot CD: error 4" msg. For the
2010 Jul 15
1
[off topic] gpxelinux bartpe
I'm trying to boot bartpe from gpxelinux I'm using gpxelinux and memdisk. my pxelinux.cfg/default looks as follows LABEL bartpe kernel memdisk initrd http://<path to iso> append iso raw Both of these I think I have working correctly. So my question I guess is for people that may have done this? Anyways I see the bartpe load screen then the xp load screen and then it blue
2005 Nov 10
1
pxelinux and bar
Has anyone been able to boot a bartpe image successfully using pxelinux or does anyone know if this is impossible? For those who don't know, bartpe is a legitimate way to make a trimmed down installation of Windows XP or Server 2003 using your installation media. For more information on bartpe see: http://www.nu2.nu/pebuilder Basically the pebuilder gathers the minimum files needed to
2005 Aug 02
5
Re: SYSLINUX Digest, Vol 29, Issue 2
Sure, I don't mind testing it out on there for you, but, where do I find the pre releases to try then? At least we know it's between 2.13 and 3.00. That narrows it a bit I would think. Mind you, if it jumps up a major revision number, I guess that means a lot of changes went in. On 8/2/05, syslinux-request at zytor.com <syslinux-request at zytor.com> wrote: > Send SYSLINUX
2007 Nov 18
11
Dual boot box: WinXP & CentOS 5: Impossible to restore WinXP?
We rarely use M$ Windows, but I let my daughter surf pbskids.org while using Windows and a Trojan Horse modified or deleted the user32.dll file. I found the instructions on the Microsoft Support web site, and it would be very easy for me to expand a new copy of user32.dll if I could get the MS WinXP CD to work. It boots OK, I press a key so it will search hardware and it then has hard drive
2008 Nov 10
2
PXE booting BartPE ISO file to Eee Pc
So I've been playing with this for hours and still unable to get everything working properly. In short I'm trying to boot an ISO image created by BartPE over pxelinux. When I attempt to do this it goes directly to a blank screen that just has a blinking cursor. Here's what my setup looks like: pebuilder.iso - the ISO file created from BartPE using WinXP SP2 CD as source but with
2005 Jan 31
3
Using PXE to Boot CD Images?
Is it possible to chain isolinux and memdisk over pxelinux? If it's possible, I'd like to boot a CD Image over the network. I've been using pxelinux to boot ltsp for years, and recently upgraded to take advantage of memdisk for booting a DOS hd-image. Ideally I'd be able to boot a CD-Image. Thoughts? -- <:3)~ Michael T. Garrison Stuber
2005 Aug 08
0
SYSLINUX 3.10-pre5
Please test this prerelease if you have a system on which 2.13 works but 3.0x doesn't. It's based on some of the stuff I have iterated back and forth with Nazo. Huge thanks to Nazo for trying a gajillion experiments and being very prompt returning results. http://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/ -hpa
2006 Mar 07
2
Booting BartPE 3110a
Can someone point me to instructions on booting BartPE with pxelinux.0 over the network. Thanks.
2008 Sep 20
2
Gigabyte motherboards and Syslinux
I read the mailing list archive about Gigabyte motherboards not working with USB booting ("[syslinux] Gigabyte recent bios & syslinux extlinux trow USB-IDE bridges or pendrives", 16 Aug 2006). I have a Gigabyte GA-MA790GP-DS4H motherboard that I tried to boot in USB-HDD mode with a PNY boot pen. I installed System Rescue CD on it. It would appear that Gigabyte still doesn't
2007 Dec 05
1
USB Boot WinPE 2.0 via syslinux
Hello all, I'm booting for 1 year WinPE 2.0 and floppy disk images via PXE (pxelinux) and this works very well. I also want my floppy disk images and WinPE 2.0 on a bootable USB Stick. So i format my usb stick with fat16 and use Syslinux to make it bootable. I can now boot from stick and execute the floppy disk images. This works very well. But how can i add WinPE 2.0 booting support ? I
2005 Aug 02
1
Can't boot Syslinux from HD directly. Can indirect ly?
Hi! > -----Original Message----- > From: Nazo [mailto:nazosan at gmail.com] > Sent: Tuesday, August 02, 2005 1:37 AM > To: syslinux at zytor.com > Subject: Re: [syslinux] Can't boot Syslinux from HD directly. > Can indirectly? > > > On 8/1/05, H. Peter Anvin <hpa at zytor.com> wrote: > > Nazo wrote: > > > I've installed Syslinux on a
2007 Feb 09
2
booting winpe from directory
Hi guys, im looking for method booting winpe2.0 or bartpe directly from a directory into ram. Currently im booting from iso images, and its working really good, but since im modify alot, its a hassle to create a new iso everytime, making it bootable....etc. So if anyone might can help me, i would really appreciate it Thx in advance.. Markus
2007 Nov 02
3
PXELINUX - TFTP Problems - Option Negotiation Failures
I apologize if this is the wrong place to be asking this, but I'm pretty much out of options on where to go. I'm using the pxelinux version of tftp. Everything has worked well up to this point, however I've been trying to impliment a pxe bartpe solution in our office. Unfortunatly tftp is not passing the files correctly to the client. Here's the rundown. Server client connects to
2005 Dec 02
3
PxeLinux menu.c32 chaining
Hello, many of our platforms do not have a integrated floppy, some even don''t have a floppy controller. As pxelinux still has a problem with machines without a floppy in combination with some bios versions I need to chainload a different bootstrap loader which works on the floppyless platforms. But I also need to load a BartPE and the other BS loader does not support that. So I tried to
2007 Nov 19
5
Dual boot box: WinXP & CentOS 5: Impossible to restoreWinXP?
On Monday, 19 November 2007, Ross S. W. Walker rwalker at medallion.com wrote: <snip> > You can fix it all from CentOS. Ross: In addition to coming up with another slick way to fix this box, which I truly appreciate, you came up with the below: >You need to run some kind of rootkit detection and cleaner on the >system before it reboots or else it will just reinstall itself.
2006 Mar 19
1
remote boot bartpe
Hi, I've read in some post in your mailing list there is a special version of startrom.0 which is possibile to load remote bart oe by xpe. Can you provide me it or teach me how to create my own one? Thanks in advance
2005 Mar 07
1
How to Create an ISOLinux Bootable CD Question
Peter, First, I'm not a programmer and I don't have Linux. The reason I am emailing you is that I spend the two weeks looking over your site and other trying to figure out " HOW to create an ISOLinux image or convert my existing ISO image to and ISOLinux image. I have some software called" Flashboot" that can take and ISOLinux image and can create a bootable Flash drive of