similar to: problems booting isolinux

Up until yesterday I've had a lot of high pitched noise when connecting a BT101 to the PSTN via the X100P. I was using an Asus A7V133 with raid motherboard and an 850 AMD Duron. Over the weekend I thought I'd try another machine. I had an HP Vectra 400 Mhz PII MMX with 128 Mb RAM available, today no noise at all. Now I must see if the Vectra is up to the job. -- Dave Cotton

hi, i'm doing my own windows multiboot dvd's using latest ultraiso and isolinux 3.09, and everything was fine till now. now i tried 3.11 and this release doesn't load any windows cd boot sectors while other stuff like memtest works fine. same for isolinux 3.10, both the normal and the debug version. the attachment shows a vmware 5.5 beta window with an error message by isolinux 3.11

isolinux: Extremely broken BIOS detected Yoper 2.1 --------- ISOLINUX 2.11 2004-08-16 isolinux: Loading spec packet failed, trying to wing it... isolinux: Extremely broken BIOS detected, last ditch attempt with drive = 9F isolinux: Disk error 01, AX = 4209, drive 9F Boot failed: press a key to retry... Helix 1.5 --------- ISOLINUX 2.04 (Debian, 2003-06-06) isolinux: Loading spec packet failed,

I'm having a problem booting Slackware 10.1 boot CD's as well as an isolinux image of my own. The system is a VIA Epia M10000 and the drive is an AOpen ISU-8424E CD/DVD writer. If I use a Toshiba CD-RW/DVD-ROM Drive SD-R2612 in place of the AOpen DVD writer, the cd boots fine and everything works as expected. What's the best course for further debugging of this problem? The only

Hi folks -- I'm trying to share out my home directory and one other directory from an SGI O2 running IRIX 6.3 to an HP Vectra running Win NT 4.0. I'm having some problems and would appreciate a hand. I've read the man pages, DIAGNOSIS.txt, the FAQ, and most of the other documents in the distribution. My problem is probably a simple configuration issue, but I haven't been able

Hi, I came back from a quiet weekend today and found my E400P box to have gone astray. Asterisk is loaded from inittab, and started crashing and reloading a couple of thousands of times, each time notifying my monitoring service :-P I remember there would be issues on old cvs stuff since the crash at digium so I made a clean checkout just now. Here is what happens when I load manually:

Greetings! I have made great progress thanks to this group. My Asterisk seems to be working for the most part. I am using the following equipment/software: * HP Vectra VL - Pentium Pro CPU - 256MB RAM * Redhat Linux 8 - Loaded straight from distro CDs as Developer Workstation - latest updates from RHN * Asterisk (latest as of two weeks ago when I used CVS checkout) * X-Lite SIP Client on a

For future reference check the archives of http://syslinux.zytor.com for the thread:"isolinux: Extremely broken BIOS Detected" and you will see that a BIOS upgrade was 'not' necessary for a Phoenix - AwardBIOS v6.00PG. The fix was the BIOS settings and elimination of both memory address and IRQ conflicts. You really don't want to go to the 'upgrade BIOS' option

Hello, I don't know if it's ISOLINUX or a broken BIOS, this is the first time ever seeing this error. "Extremely broken BIOS" on a EPIA -M10 BIOS Rev 2.07 (latest ver available) EDEN VIA mini-ITX mobo. ISOLINUX on RH8 ver 1.75, RH9 ver 2.00 and Yarrow ver 2.06 all produce the same type of error. RH 7.3 and Lindows boot and build without any problem but I don't think they

[This email is either empty or too large to be displayed at this time]

> -----Original Message----- > From: Michael K Ter Louw [mailto:mterlouw at gmx.net] > Sent: woensdag 4 september 2002 1:24 > To: Lagerweij B ; syslinux at zytor.com > Subject: Re: [syslinux] isolinux.asm - improving spec_query_failed > routine... > > > > Hi Peter, Bart, and everyone else, > > I also write software that boots from the CD drive, so this >

Hello! El Torito & isolinux test with qemu - 3.06 boots, BUT windows boot files can't be loaded. ISOLINUX 3.06 2005-01-10 isolinux: Image checksum error, sorry... Boot failed: Press a key to retry... - 3.07 boots and starts windows boot files in the second run. The first one gives: isolinux: Disk error 0C, AX = 4204, drive E0 - 3.08 boots und starts windows boot files in

I am trying to create a bootable cd from a working LFS 6.1 partition. Thank you in advance for any thoughts on this. This is the error I get: ISOLINUX 3.10 2008-08-24 Copyright (C) 1994-2005 H. Peter Anvin Could not find kernel image: lfskernel-2.6.11.12 boot : _ under /isolinux/ I have these files: isolinux.bin I've tried 3.10 and 3.09 isolinux.cfg: default livecd label livecd

Hello, many of our platforms do not have a integrated floppy, some even don''t have a floppy controller. As pxelinux still has a problem with machines without a floppy in combination with some bios versions I need to chainload a different bootstrap loader which works on the floppyless platforms. But I also need to load a BartPE and the other BS loader does not support that. So I tried to

The attached config works, but gives 2 error messages that get covered up by the GUI screen so fast I cannot read them. I think they are probably about having 'LABEL' with nothing after it. I was trying to follow the example in menu.doc but somehow I'm doing it wrong. Please consider helping me figure out how to get the same resulting GUI menu without any error messages. I am using

Hi, some time ago I tried to boot an isolinux boot loader from another one to be able to boot e.g. a Knoppix CD with its original boot loader and menus from a "main" isolinux on a multiboot DVD. This works for isolinux <= 3.07 now! However, newer isolinux boot loaders have some problems and the isolinux (e.g. of the Knoppix CD) loaded from the multiboot DVD's main isolinux

Trying again since the mailing list says I have a 'suspiscous header'. I have been told to get linux running on two HP DL360G4p machines (ancient rackmount xeon stuff). Unfortunately, while isolinux boots fine from CDROM, and extlinux can boot a USB stick, I cannot get extlinux to boot from the CCISS hard disks (two disks in hardware raid 1 configuration). I searched on google a lot,

Hello, I'm Jacques living in France. I have a problem when I use isolinux. I'm working on a multiboot cdrom so I make many "mkisofs" for testing. The problem is that when I modify the "isolinux.cfg" file and then build my image with mkisofs it's the previous configuration of my "isolinux.cfg" which appears on my screen (I run the .iso file with qemu...)

[cross-posted to nntp://comp.os.linux.setup, sorry] Dear Everyone, I'm writing this message merely to publish this information somewhere visible, so that others can find it when debugging a linux-based bootable CD compilation setup... For many months now, I've been using cdrtools 2.0 with isolinux 2.04 to create bootable Linux CD's. I know there are newer versions of both

i tried to make a bootable CD with isolinux,but met some problem. the error is as follows. i don't know what cause the problem. anyone met the same problem? thanks for help. ===================================================================================== mkisofs 1.13 (i686-pc-linux-gnu) Scanning . Scanning ./boot Scanning ./isolinux Scanning ./isolinux/help Excluded by match: