similar to: isolinux issue with AOpen DVD writer

On the cheap side, the ITX or even MicroATX machines work great. These are commodity items, so they tend to be far less expensive than custom solutions. Various manufacturers, but we've had very good success with any of the AOpen MicroATX boards and their slimline MicroATX case: Aluminum: http://usa.aopen.com/products/housing/A340-series.htm Steel:

Hi to everyone! I am new to this list and i want to greet you all! I am trying to install Asterisk on a Fedora Core 3 Distribution with a Digi Datafire Micro V ISDN Card. I know that I have to use the ISDN4Linux so in modem.conf I set the I4l driver ,the msn and device. Modem.conf [interfaces] context=remote ;driver=aopen ; modem by AOpen driver=i4l ; isdn4linux - an

Hello List! I finally got asterisk with capi working, and its already answering my call as well! :) Now i would like to call a number from my shoft phone (kphone). This is my extentions.conf: --- [general] static=yes writeprotect=no [globals] CONSOLE=Console/dsp ; Console interface for demo IAXINFO=guest ; IAXtel username/password

Hello, I am new to Asterisk, so RTFM answers welcome too (just include the FM's link :). I'd like to build a simple dialout server based on Asterisk. I installed 0.4.0 from package (a Debian SID machine, "server"). The client is gnophone (a Debian SID machine too, "client"). My modem is a GVC 56k voice modem connected to the server's serial port. I modified

Hi, Apologies in advance for the lengthy email. I'm new to asterisk and have trouble with isdn4linux. The setup is very basic like this: winxp ------- asterisk -------- winxp x-lite | x-lite | pstn The hardware involved is: Compaq EVO with RH9/kernel 2.4.20-30.9. Fritz!Card PCI v2 Asterisk CVS-04/17/04-21:36:18 Basically

I'm still playing with * at the moment. Just trying to figure out how much it can do. Anyway, it looks like * supports voice modems. So here come the obvious questions... How well does * support vmodems? How do I set * to use my vmodem for incoming calls? Has anyone gotten it to work? Thanx, Mike Diehl.

Johan accidentally wrote me personally with the following email, which I thought would be better intended for the syslinux list. Replies to *Johan* please. :) -d ----- Original Message ----- From: "Johan Win?s" <johan.winas at isg.se> To: <david at weekly.org> Sent: Thursday, January 16, 2003 2:33 AM Subject: syslinux with flash discs? > Hi.. > > Just tried out

Hello list, any try the new memtest86 v3.2 with isolinux 3.11 cd and pxeboot? How is the proper way to chainload memtest86 I was tried: label memtest kernel memtest.bin but, nothing happens just a weird hang (my older versions of memtest hangs too). Anyway chainloading in a floppy image with memdisk on CD or pxeboot was fine but if I use memory to emulate a floppy I was not using this memory

hey guys i got ubuntu 9.04 and i got wine so i can play a few of my games but none seem to work but only one and the only one that works is star wars Jedi knight Jedi out cast all of the games that don't work are here: Max Payne error:no zbuffer formats found star wars battle front 1&2 don't start at all star craft starts but is very slow and lags star wars eaw does not start at all

I send to the list the perl script to make the inverse of sys2ansi.pl and convert any ansi file to syslinux format. I recommend jave editor to deal with ascii arts and ascii fonts www.jave.de and for painting colours over the ascii file, the ansieditor from http://www.win.ua.ac.be/~wschrep/ansied/ with the patch attached for import and export to syslinux directly and for colour paint mode to

I am not certain that this is the right place to post this, but maybe some kind soul can point me in the right direction if not. And I apologize if this is the wrong spot...The reason I posted here is that I recall running across a syslinux changlog that said "..added support for reading .spl..." files. I want to customize the suse boot up splash screens (for a CD install). I have been

Can someone point me to instructions on how to build a pxeboot/initrd.img with updated drivers. I would like to pxe boot and install rh8 on a newer machine, and the pxeboot files that come with rh8 (2.4.20-8) don't support my e1000 NIC. I believe that the newer 2.4.20-28.8 drivers will, but I'm having trouble finding instructions in rebuilding the pxeboot initrd.img + vmlinuz to

I researched on Archive, but the instruction says to copy startrom.com to startrom.0, so I changed boot program to startrom.0 instead of pxelinux.0, it gives me a TFTP error saying file not found. then I keep startrom.0, change boot program back to pxelinux.0, then I do not see F12 key and boot directly to PXE. then I change the boot program to startrom.com it asked me to press F12, but can

Setup: Osol.11 build 109 Athlon64 3400+ Aopen AK-86L mobo adeptec 1250sa Sata PCI controller card [re-posted from accidental post to osol `general'' group] I''m having trouble with an adaptec 1205sa (non-raid) SATA PCI card. It was all working fine when I plugged 2 used sata 200gb disks of a windows xp machine into it. Booted my osol server and added a zpool mirror using those

I have the transgaming version of wine which i downloaded from their sourceforge page. I recently got my hands on a tnt2, after having used a voodoo3. (dont worry, i didnt pay anything for it =) so i installed everything, opengl games work perfectly (0.9-769 drivers). but when i try to run directdraw games in DGA mode, i get weird problems. the screen is split vertically into 4 parts. anyone

Hi, I have installed an USB modem and test it using the strings from the included Aopen modem (Rockwell based), modified the modem.conf file and then Asterisk load them without errors. What is the syntax to be used with a modem as a FXO device when dialing? I have tried: exten => .[246]XXXXXX,Dial(Modem/${EXTEN},20) but it doesn't work. What else must be done? Thanks, Dan

Hi list, I've browsed through the wiki pages and finally would like to get some answers from peple who perhaps had used such card. I have the sangoma s508 card. It has no CSU/DSU. It is an ISA card with DB9 and DB25 connectors (for RS232 and V34/X21/EIA interfaces). They claim it is a frame relay and syncronous ppp card. Can I use this card with asterisk in any way but without

Im not shure who maintains the LINT file that resides in /usr/src/sys/i386/conf/LINT Or should i do a cvs commit by my self? Im not so familiar with cvs..So anyone that can tip me how to do it please do if iam supposed to do it? # uname -a FreeBSD <hostname> 4.8-RELEASE FreeBSD 4.8-RELEASE #0: Thu Apr 17 03:52:52 CEST 2003 erikrana@<hostname.tld> :/usr/obj/usr/src/sys/fw_48

This is really OT, I got jave to paint some prety Ascii Fonts on my terminal server message file, But I'm not able to find out a simple way to paint ansi coulors than escaping and check a table segment by segment. ?Wich editor you use to use if any? Sorry for the OT :) -- Gustavo Guillermo P?rez Compunauta uLinux www.compunauta.com

Hello list, I'm having problems with newest BIOS updates from Gigabyte to my Mother Boards, they don't want to boot syslinux, extlinux y usb-hdd mode. Then I need to know if someone else are having same problem, and can send me the Mother Board versions and bios versions to report as a bios bug. this is from the support, I'm awaiting for answer.