similar to: CD-ROM won't boot. BIOS problem?

Hi, We have a client that is looking for a CPCI or ATR system. If someone from sales could get back to me that would be greatly appreciated. I can be reached at 848-210-0001 or 914-600-2000. Thanks in advance. Regards, Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm pleased to announce the availability of CHAN_NMS - channel driver for NMS Communications (now Dialogic) hardware. The attached README explains it all. The project website is http://chan-nms.hosting.lv/ CHAN_NMS is an Asterisk PBX channel driver that supports NMS Communications [1] (acquired by Dialogic [2]) Open Access line of products, that includes E1/T1 boards [3] for PCI(-X), PCIe,

Hello, on may 7th I send the following mail. Can you confirm that it is received and can you comment on the reaction of the manufacturer? In our system (lot of CPCI boards) the atftp server is sometimes so busy that a TFTP request times out. I added the PXE option reboottime to force a quick reboot. Once in a while this fails and the board just doesn't reboot. I can easily reproduce the

Shoval, Interesting Mention. I agree, most people don't have CO exp. And I wish daily I had enough. Understand that what I mean by my e-mail is consumer side FXS ports, in broader terms, I mean, customer picks up a phone line, it signals a channel bank which signals *. 24 of those channels. Not channels equipped to Send Signal to the CO that a loop has been made.. meaning FXO. 24

Hello, In our system (lot of CPCI boards) the atftp server is sometimes so busy that a TFTP request times out. I added the PXE option reboottime to force a quick reboot. Once in a while this fails and the board just doesn't reboot. I can easily reproduce the problem when I rename/delete the pxelinux.cfg directory. In that case the board reboots fine a few times but hangs within 15 minutes.

Use the current logging message styles. Convert the dbg and debug macros to alway have a terminating \n. Remove err, warn, and info macros, use pr_<level>. Add pr_fmt as appropriate. Signed-off-by: Joe Perches <joe at perches.com> --- drivers/pci/dmar.c | 116 ++++----- drivers/pci/hotplug/acpi_pcihp.c | 36 ++-- drivers/pci/hotplug/acpiphp.h

Use the current logging message styles. Convert the dbg and debug macros to alway have a terminating \n. Remove err, warn, and info macros, use pr_<level>. Add pr_fmt as appropriate. Signed-off-by: Joe Perches <joe at perches.com> --- drivers/pci/dmar.c | 116 ++++----- drivers/pci/hotplug/acpi_pcihp.c | 36 ++-- drivers/pci/hotplug/acpiphp.h

Use the current logging message styles. Convert the dbg and debug macros to alway have a terminating \n. Remove err, warn, and info macros, use pr_<level>. Add pr_fmt as appropriate. Signed-off-by: Joe Perches <joe at perches.com> --- drivers/pci/dmar.c | 116 ++++----- drivers/pci/hotplug/acpi_pcihp.c | 36 ++-- drivers/pci/hotplug/acpiphp.h

The quick question: Do the digium drivers for the Digium Wildcard TE410P (4 port T1/E1/PRI 3.3v card) , the T100P (single port T1), and the TDM400P support hot plug PCI? I am also noting that while the TDM400P doesn't state the voltage requirements, it looks like a 5v card. I hope that I am wrong on this. What type of T1 channel bank would people recoment for ISDN (for video

Hello lists, I,ve compaq ML350 with 2 Xeon 2.4 GHZ and FreeBSD 5.0 RELEASE installed and working very fine about 4 mounts. The machine running GENERIC kernel samba and firebird database server with no problems until at begining of this week, in morning machine freezes with no responce iven in conconsole, no responce from network (pinging) no responce on console (key pressing) the only way to get

Hi everyone, My email server is running CentOS 3 and I can't upgrade it to CentOS 4 using the CD's. At first I thought it was the old Megaraid card (that's no longer supported), so I replaced that with a new card. I've tried ISO's from CentOS 4, 4.1 and now 4.2 which I've tested and booted in other machines. Just not this one. I've never had a problem like this

Hi, I am running a Xeon with hyperthreading support. Until last week's HTT modifications, according to ps(1) and top(1) both logicals CPUs were in use. (Processes in CPU0 and CPU1 state; "C" column showing "0" or "1".) This has changed with a recent -STABLE kernel which includes last week's changes to HTT (removing "options HTT"). I am only seeing

Hi, Thanks to everyone involved in the Xen project. I think it is great and can''t wait to get my hands dirty with it. In the meantime, I cannot boot Dom0 on an ibm x335 and I am not sure what the problem is. Any insights are welcome. Here is what my grub.conf file looks like: title Fedora Core (2.6.8-1.521) root (hd0,0) kernel /vmlinuz-2.6.8-1.521 ro root=/dev/sda9

Could the problem be that the e100 can do IP receive checksumming on the board, but the eepro driver doesn't enable it. When the board is doing checksum offload, then the csum field isn't set. Please try disabling receive checksumming on the e100 driver modprobe e100 XsumRX=0 If this is the problem, it exists both 2.4 and 2.6. On Wed, 27 Aug 2003 18:24:57 +0200 Hannes Schulz

Hi, We have a pretty serious problem with our news server crashing during the expire cronjob. This happened with 4.7-RELEASE, so we upgraded to 4.8-RELEASE recently, hoping that the problem might be fixed, but it isn't. The machine is a Compaq DL360-G2. I've searched the PR database as well as the mailing list archives for the panic string, but didn't find anything. What makes the

After some dialog with Terry Lambert on -hackers, I've been advised to post this here. I have a 4.7-RELEASE-p10 box that is suffering regular kernel panics. The machine is a Dell 2650 running primarily as a file/print server to a number of computer labs of about 400 machines (although it also functions as a rembo image server and squid proxy). It mainly stores applications, which

Hi, I'm not subscribed to the list, so please cc me if you want to reach me. We've found some interesting problem with some Fujitsu-Siemens PCs using pxelinux: The PCs are "FS Scenico L" with Athlon XP 1800+ CPUs and Via KT266 chipset. We tried to boot off pxe using pxelinux 2.09/2.10 with several 3com 3c905-* cards. The PCs loaded the kernel but right after

CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p at virginia.edu> Cc: linux-pci at vger.kernel.org Cc: xen-devel at lists.xensource.com Cc: virtualization at lists.linux-foundation.org --- drivers/pci/ioapic.c | 2 +- drivers/pci/pci.c | 2 +- drivers/pci/pcie/aer/aerdrv.c | 4 +-

CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p at virginia.edu> Cc: linux-pci at vger.kernel.org Cc: xen-devel at lists.xensource.com Cc: virtualization at lists.linux-foundation.org --- drivers/pci/ioapic.c | 2 +- drivers/pci/pci.c | 2 +- drivers/pci/pcie/aer/aerdrv.c | 4 +-

Hello, I am trying to get samba to work with a windows 2000 machine as a PDC nd solaris 8. I have already joined the domain. I can run getent passwd and I can see DOMAIN\users. I can do a smbclient -L <PDC> -U Administrator and that works fine. Doesn't list my shares from my UNIX server but it lists what the PDC is sharing. I have samba running on a machine that is not running NIS