similar to: PXELinux over Ris server

Hi, I am trying to boot the PXEclient via pxeserver and I am getting an error "file not found", following are me setup in the /tftpboot: /tftpboot: initrd.img linuz pxelinux.0 /tftpboot/pxelinux.cfg default (lower case) in the default file: # This is the default pxelinux config file. LABEL test KERNEL vmlinuz APPEND

Greetings Luis, I saw a thread about Startrom.com and startrom.o that had your name attached... I was wondering if you had a moment to comment on an issue that I have. I have a Linux server that is our corporate PXE server. It is set up in a logical folder structure so that a host can be pointed to boot a variety of different OS's (DOS, Linux loaders, Windows PE). Here is in my dilemma,

Hi folks, I'm finally tired of dealing with floppy disks to control our remote installs and thought that PXELINUX sound like a great way to go. However, I've got multiple hurdles and I'd like some advice before I get myself dug in too deep... We currently have Solaris Jumpstart and Windows RIS running in the department and now we would like to intermix Linux PXELINUX booting. Any

We are thinking of using pxe boot with a windows ris server to start off a Centos 4 install. Does anyone know if this is possible? Thanks Dean

Hello, I am attempting a PXE boot between two systems, each with multiple network cards. While there are a total of 8 ports on each computer, only two (each) are connected as follows: Boot Server eth0 - 10GbE fiber channel (private to the set of computers being managed) (Qlogic) eth4 - 1Gb ethernet (public and out of my sphere of management) (NetExtreme II)

On 2014?03?07? 18:24, Ady wrote: > Hi Steven, > > Perhaps this could be of some basic sample/help, being based on > Debian: > https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=720589 > > where: > _ if gpxelinux.0 is needed, it should probably be replaced by ipxe. > _ lpxelinux.0 (from official Syslinux archive) could optionally be > added. > > _ from the

Gene, I found a document from IBM that explains why it didn't like Vendor-Class-Identifier option I was using "PXEClient" was causing EFI boot rooms to dummy spit, that's very useful, that combined with RTFMing the PXE specs 3.0-3.2 might solve my problem if I keep at it. http://www-01.ibm.com/support/docview.wss?uid=swg21247032 Even the PXELinux docs suggest encapsulating

Hello Friends, once more. We got pxelinux run with win 2000 dhcp. It works really fine. there a not problems at all. Now we want to get it run also under novell, but we want to use the novell dhcp, we don't need the tftpd from novell, we want to use a tfptd on another machine (a simple micrsoft tfptd). As we found out, novell does not support the dhcp options (67 = bootserver, 68 =

My /ect/dhcpd.conf looks like following: # Sample /ect/dhcpd.conf ddns-update-style ad-hoc; allow booting; allow bootp; #default-lease-time 600; #max-lease-time 7200; option subnet-mask 255.255.255.0; option broadcast-address 10.0.0.255; #option routers 10.0.0.1; option domain-name "nfs.jun"; subnet 10.0.0.0 netmask 255.255.255.0 { range 10.0.0.1 10.0.0.100; } group { next-server

I noticed some links and suggestions on the SYSLINUX web site that reference how to run TFTP on Windows 2000 Server. Two of them suggest installing RIS, and one of them points to a third-party utility. I don't need to install RIS, because I don't want to run Windows setup over PXE. (In fact, I want to use PXELINUX to boot a DOS floppy and run Symantec Ghost to deploy an image.) Also, I

Hello. In my case I can successfully boot up my Thinkpad X32, but the same configuration doesn't work for my desktop computer with Intel network card, with Intel Boot Agent 2.2 DHCP server is 10.0.0.1, tftpd (used tftp-hpa) runs on 10.0.0.32. netstat told me the daemon listen to 69 UDP port just fine. running tftp in commandline also shows it works (retrieve pxelinux.0 less then 1 second).

On 2014?03?08? 05:56, Gene Cumm wrote: > In /etc/vmware/vmnet8/dhcpd/dhcpd.conf I added the following: > > host 7x { > hardware ethernet 00:0C:29:38:6B:6E; > filename "e6/bootx64.efi"; > next-server 172.21.1.1; > # option vendor-encapsulated-options >

On Thu, Nov 27, 2014 at 8:59 AM, Luke Ledgerd <luke.ledgerd at niteco.se> wrote: > Gene, > > As it happened I started working on this again just as you mailed me. I saw it in IRC. > It appears that PXE-E99 may also be related to MTFTP part of the PXE spec. IBM also says it has something to do with jumbo frames. I tried setting PXE.mtcp-ip to 0.0.0.0 to disable it but still no

Gene, As it happened I started working on this again just as you mailed me. It appears that PXE-E99 may also be related to MTFTP part of the PXE spec. IBM also says it has something to do with jumbo frames. I tried setting PXE.mtcp-ip to 0.0.0.0 to disable it but still no joy. The bootfile size shows up as zero because that relates to "option boot-size" in dhcp and doesn't seem to

Hi list, I have installed DHCP, PXE and the TFTP-Server tftp-hpa. I'm running Debian Woody on my server and I want to boot a PXE-Client with this server. I have installed all as it is described in the docs found on the net. Under root: /tftpboot/ /tftpboot/X86PC/linux /tftpboot/X86PC/linux/messages /tftpboot/X86PC/linux/linux.0 /tftpboot/X86PC/linux/vmlinuz

This message is from Luis F. Correia, who unfortunately could not post it himself to the list.... ---------------------------------------------------------------------------- -- Hi! I would like to thank you, H. Peter Anvin for creating this wonderful set of tools. The only thing that bothers me is the lack of proper examples in the docs. Syslinux and affiliates would certainly improve

Hello, I'm still trying to setup RIS (Remote Installation Service -w2k) with PXE Linux, but before that I must say that the mail list archive is a _good_ idea. Back to RIS. When I start from pxelinux memdisk initrd=risbootdisk.img I get an error: No UNDI Driver found. The risbootdisk.img is a bootdisk from Microsoft, which starts a RIS installation. When I boot from floppy it works fine,

Hello, I would like to install a Windows 2000 Server and configure it with RIS (remote installation services). The server is in a domain where a Samba 3 server, a machine with SuSE Linux and Samba 3.0.20b-3.4-SUSE, plays the PDC role. The PDC works well. When I try to configure RIS in the application wizard (appwiz.cpl) of that Windows 2000 Server machine, it tells me that the setup for RIS

gpxelinux.0 (3.73 and 3.74) can't work with microsoft RIS (startrom.n12),but pxelinux.0 (3.73 and 3.74) can work with microsoft RIS well. keeppxe can't work in 3.74.

Will McDonald wrote: > On 01/02/06, Plant, Dean <dean.plant at roke.co.uk> wrote: >> We are thinking of using pxe boot with a windows ris server to start >> off a Centos 4 install. Does anyone know if this is possible? > > I've never done it myself but turned up a few links a few weeks back > which imply it's feasible... > >