similar to: Syslinux / Hard drive booting

Hi.. Well i've tried each and every method to insert any winme command.com into any bootable image and its really giving me problems.... I even further tested the same image with reinserting the 98 command.com and the image worked just fine.. So acc to me the problem has to lie in me command.com as there is no real mode dos in ME.. Also try using umbpci.sys and lowdma.sys for managing

Hello, We are having problems booting disk images and are looking for a little help. Here is the screen capture of what we see: http://www.kmaclub.com/syslinux/largefloppy.png We have also tried using images from http://severinterrier.free.fr/Boot/ImgBoot/ with a similar result. Basically, memdisk loads the images and then it hangs. label linux kernel memdisk append

> Hi All, > First post and hopefully someone can steer me in > the right direction for this problem. I did a bit > of googling and found some hints but nothing concrete. > > We are using Syslinux and a FAT32 USB thumb drive > (single partition) to boot a customized Debian OS > which works very well with newer motherboards. > However we have a few older Dell

A problem with 4.8 reported by myself and Aaron D. Gifford. Anyone in -stable who knows more? ******** I'm assembling a Compaq 1850R with attached storage system. For the built in scsi controller (sym), there are three drives internally on channel 1 + 5 drives externally on channel 2. During boot, I can see all disks being identified first by the machine itself and then in the early part

Hi All, First post and hopefully someone can steer me in the right direction for this problem. I did a bit of googling and found some hints but nothing concrete. We are using Syslinux and a FAT32 USB thumb drive (single partition) to boot a customized Debian OS which works very well with newer motherboards. However we have a few older Dell machines that simply hangs when trying to boot

Hi, I have been using pxelinux for quite a while. It works extremely well for us. Now, I am looking at something new. We would like to: boot ( some OS - hopefully linux )from the network using pxelinux. make a small partition dos partition on the first disk. connect ( via perl dbi ) to a back end database Download the appropriate files for either a winxp build OR a kernel/ramdisk for a

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

I have been succesful in using syslinux to boot from a hard drive, by dd'ing a Linux (LRP) image onto the drive and then running syslinux (i.e. dd if=the_image of=/dev/hda followed by a syslinux /dev/hda), however I'm having problems getting it to work from a partition on the hardrive. I'm trying to use syslinux on a small 100MB FAT16 partition (same commands as before, just

Hello, I am trying to use a 1.5TB Eonstor raid array with FreeBSD 7.0, but I don't understand whether it is the raid or the scsi card or something else that is causing the computer problems when accessing the raid. My problem is that soon after recognizing the attached disk during boot, FreeBSD appears to hang for about 10 seconds and then says ahd0: Recovery Initiated - Card

I am not too familiar with Cairo and RGtk2 and have the following problem: I have a container with two GTK drawing areas converted into Cairo devices. I know that I can set the current drawing context e.g. using dev.set(). But this is tedious. How can I set the context using the objects da1 or da2? w <- gtkWindow() w$setSizeRequest(400, 400) vbox <- gtkVBox() da1 <- gtkDrawingArea()

hi all, I'm trying to give access to snapshots taken from by dell iscsi MD3200i to my maildirs users. snapshot are mounted in read only mode from my FreeBSD box. In my /usr/local/etc/dovecot/conf.d/10-mail.conf, I have : namespace inbox { inbox = yes } namespace da1 { prefix = INBOX.backup.da1. hidden = no list = yes inbox = no location = maildir:/da1/%u/Maildir type = private } I

This patch builds a floppy image with contains HDT, so users of GRUB or GRUB4DOS can use HDT too, without installing Syslinux. When you compile Syslinux, this floppy image isn't build automatically. To build it, runthe following from the extracted Syslinux source: $ cd ./com32/hdt $ make hdt.img As suggested by Pierre-Alexandre Meyer, all extra files required for building the floppy

Hi, I've the following setup : - FreeBSD 9.0 / Dovecot 2.1.7 - Maildir storage over iSCSI (Dell MD3200i) - Virtual users over LDAP to render the storage snapshots available through dovecot (to allow my users to browse their mail history). Here is my conf : namespace { type = private inbox = yes list = yes prefix = INBOX. location =

Hi, I'm sorry to bring this up again but I can't quit get this too work. I'm trying to build a 2.88 floppy image so that I can use PXE to load Ghost. I'm useing the following to get a copy of the bootsector: dd if=/dev/fd0 of=bootblock bs=512 count=1 Then I build the image file with: mformat -C -t 160 -s 18 -h 2 -B bootblock x: Then use mcopy to put the required

I have an Asus A8V-MX motherboard with an AMD Athlong 64 X2 3800+ CPU and I'm trying to run powerd to keep it cooler/quieter/greener. I'm running -STABLE (6.1-RC) cvsup'ed a couple of days ago, with a kernel config that consists of the SMP sample plus an atapicam device. I'm loading the cpufreq.ko module in /boot/loader.conf. I've attached my dmesg output and sysctl -a

I seem to have managed to end up with a pool that is confused abut its children disks. The pool is faulted with corrupt metadata: pool: d state: FAULTED status: The pool metadata is corrupted and the pool cannot be opened. action: Destroy and re-create the pool from a backup source. see: http://illumos.org/msg/ZFS-8000-72 scan: none requested config: NAME STATE

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

First PRoblem solved > read.csv("KT80.csv") X x 1 1 0.01331361 > I ommitt "" in calling the file name... 2011/12/14 Trying To learn again <tryingtolearnagain@gmail.com> > Hi all, > > I have 100 csv files always with this information (I Attach two example > excels) > > KT80.csv contains: > ,"x" >

Hi all, is there a known issue with health monitoring on supermicro SuperServer 6010H? (Im primarily interested in temeperature monitoring) I have tried both mbmon and lmmon with the following results: stats# mbmon -d SMBus[ServerWorks(ServerSet Chipset)] found, but No HWM available on it!! No Hardware Monitor found!! InitMBInfo: Unknown error: 0 stats# lmmon IOCTL: Operation not supported by

Hi. Im tryuing to boot a 486 laptop with syslinux. I want to boot from a CF card in an IDE adapter, plugged into the IDE interface. my procedure is: fdisk (create 1 partition, mark it bootable) mkfs.vfat (format it) syslinux /dev/disc/partition copy bzImage to the partition and rename it LINUX this fails either with a blinking cursor and no text, or a 'Boot failed' prompt. if I format