similar to: isolinux 2.01 bug with Compaq and Promise BIOS

Hi all.. I have found some problems on smbfs module in 2.4.18 kernel. I compiled it by myself (not the very first kernel compilation in my life ;-)) and then I have got it. Looks like it touch smbfs module as when I recompile 2.4.18 modules with smbfs sources changed to sources of smbfs from 2.4.17 problem disappears!! My mainboard is Abit BE6 with Pentium III 450 MHz. I am using SuSE 7.3 with

Dear colleagues, I'm planning to debug usb connection with my new SONY CLIE handheld, and found that this process is much complicated by the fact usb.ko module can not be unloaded 'cause some process is referencing it: marck@revamp:~/tmp> kldstat -v -i 11 Id Refs Address Size Name 11 1 0xc0cf7000 1b000 usb.ko Contains modules: Id Name

I am getting these messages every 30 seconds or so. I searched around and found a few other post about this problem with other devices, but no answers to the problem. I didn't notice any of these message until I upgrade to 4.8-RELEASE the other day. This is a dual processor machine. It happens on all my machines that have em devices, which all happen to be dual processor machines. I

PC: HP Vetra VL400 Mainbood: Intel815 BIOS: Phonix 4.0 release 6.0 OS: REDHAT 9.0 I installed the X100P in PCI slot 2 and disable the USB port, serial-port and parallel-port in BIOS. I can't found the X100P card in " cat interrupts" But I can found the card in the "cat ioports" use "lspci" I found the X100Pcard use the interrupts 11 too. Who can help me to solve

I have some old PC's I want to build as a test box - It's up and running OK now. Now I installed a TDM400P and there is nothing I can do to get the card to come up. My guess is the box is not PCI 2.2 compliant or does it need to be to see the card? Thanks, Bart Here's what I know: Processors 1 Model Pentium III (Katmai) CPU Speed 551.37 MHz Cache Size 512 KB System Bogomips

I've been running CentOS 4.4 on my Thinkpad 600E machine. Now the new 2.6.9-55 kernel wants to support the SCSI devices I don't have. After the 4.4 --> 4.5 update, on the reboot kudzu informed me that it had detected my PIIX4 controller. Well, OK. That same chipset has been in this machine for 10 years, but if the OS wants to re-detected it that's fine with me. FWIW,

Hello, I am using CentOS 4.6 (2.6.9-67.plus.c4) on a toshiba tecra 8000 notebook. If closing the panel, "Panel Power On/Off" is enabled in bios, the notebook does suspend. But after opening the panel, the notebook completely freezes. If the suspend only takes a few minutes, then everything is working fine. But if the suspend takes a time more than five or ten minutes, the system

hi there I'm trying to get asterisk going on gentoo 2005.1 I'm just getting my feet wet so I thought I would just stick with the stable portage packages. Right now that's asterisk 1.0.8 I emerge asterisk with the following make.conf file: CFLAGS="-O2 -mcpu=i686" CHOST="i386-pc-linux-gnu" CXXFLAGS="${CFLAGS}" USE="-gtk -gnome -qt -kde -dvd alsa

http://bugs.freedesktop.org/show_bug.cgi?id=24147 Summary: xv output slow and causes wmaker screen corruption Product: xorg Version: git Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

Hi All, Googling X100P Clone I found several information about these cards and seems that some winmodem has the same chip used from the original X100P. Here below a list winmodem which should work as X100P clone: 1057 Motorola 5608 SM56 PCI Fax Voice Modem E159 Tiger Jet Network Inc 0001 Tiger 300/320 PCI interface I bought one "Trust 56k V92 PCI Internal Modem MD-1100" which has the

Hi I have a newly installed FreeBSD 6.0 release machine on which I am getting the following error on the console: "ad4: req=0xc23bc258 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!" This is generally associated with heightened disk activity, but it happens inevitably after a while (minutes or hours) if the machine is running. The atacontrol list shows:

I have a E110P which I can't seem to make function and i think it has something to do with interrupts, but I've never had to deal with them before and was wondering if someone could offer some guidance. a modprope zaptel loads fine. when i then do modprobe wcte11xp i get the following: /lib/modules/2.4.21-27.0.1.EL/misc/wcte11xp.o: init_module: No such device Hint: insmod errors can be

Hi I have a quad processor Compaq Proliant 5500. The output from dmesg seems strange (I have also sent a copy to freebsd-smp to ask about smp issues) and there are also some performance issues which I suspect are smp related. Could anyone who fels so inclined please take a look at the output and let me have any comments. Thanks _______________________________ Copyright (c) 1992-2002 The

It's a udev configuration. Read UDEV.txt, or, read the AMP wiki http://aussievoip.com for a step-by-step. --Rob -----Original Message----- From: asterisk-users-bounces@lists.digium.com on behalf of Jachin Rupe Sent: Wed 7/09/2005 9:16 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] /dev/zap* is not showing up (gentoo, portage,asterisk 1.0.8 hi

Today our server had seriuos problems, we had to reinitiate it and run fsck manually. Dou you think it's an ext3, kernel (vanilla 2.4.19) or hardware bug? The errors were (from syslog): -------------------------------- Oct 6 16:10:25 nou kernel: attempt to access beyond end of device Oct 6 16:10:25 nou kernel: 72:02: rw=0, want=230266240, limit=4882432 Oct 6 16:10:25 nou kernel: attempt

Hi Guys! I got a Diva passive ISDN card and I can't get it work with asterisk 1.4, It is supported in the kernel as an isdn4linux device but I can't find "Modem" channel type when i type in: core show channeltypes. I'm guessing it is removed in asterisk 1.4. Tried with capi interface but it does not work :( Anybody got some idea how can i make it work or got a link to a

I have some questions about what needs tuned on a high traffic syslog box. I seem to be dropping quite a few syslog packets. This is a syslog server for a high usage Firewall btw. Nic is a Compaq tl0 4.8-P13 netstat -s -p udp | grep buf 19,762,079 dropped due to full socket buffers uptime 5:28PM up 7 days, 18:30, 2 users, load averages: 0.21, 0.23, 0.23 I though maybe syslogd was the

Hi All, I hope I'm posting this to the appriopriate list, and that cross posting to two lists is OK. (If not, I'm sure I'll hear about it quickly :)) I'm running Asterisk on my (new) VIA EPIA-V motherboard. This seems to be the ideal platform for a home version of asterisk - its small, quiet, low power, and should have plenty of computing horsepower if only it would work!

I put this to the smp list and to stable but have had no takers from wither. nThere are both smp and other system issues and I am just wondering if anyoe would be willing to take a look at this output from dmesg and let me have some advice Thanks david ----- Original Message ----- From: "vizion communication" <vizion@ixpres.com> To: <freebsd-smp@freebsd.org> Sent:

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel: