similar to: Chances of 4.3+ version with latest kernel

Hi, I am using centos4 and am trying to build a source kernel dom0 with xen. I cloned a copy of the xen repository and did the following hg clone http://xenbits.xensource.com/xen-2.0.hg cd xen-2.0.hg/xen make dist cd linux-2.6.11-xen0 make ARCH=xen oldconfig make modules make modules_install make install After which point I get the following error : CC drivers/xen/balloon/balloon.o

John, Was there a reason for the (2) make oldconfigs? just curious This all worked rpm -i kernel.XXX.src.rpm cd /usr/src/redhat/SPECS rpmbuild -bp --target i686 kernel.XXX.spec cd /usr/src/redhat/BUILD/kernel-2.6.9/linux-2.6.9 make mrproper cp /boot/config-2.6.9-11.EL .config make oldconfig

Hi, I've built customs kernels from the SRPMs with the following: rpmbuild -bp --target=i686 /path/to/spec cd /usr/src ln -s /usr/src/redhat/BUILD/kernel-x.y.z/linux-x.y.z linux cd linux make oldconfig make menuconfig make all make modules make modules_install And it works just fine. The problem now is that I think installing that way isn't

I installed 2.6.20.7 copied /boot/config{something} to .config make oldconfig make oldconfig make menuconfig - turned on drivers -> Sata -> nvidia make bzImage make modules make modules_install make install rebooted. Seems like the issue I had with forcedeth (nvidia) bad MAC address is gone. However, the iptables gives errors. Where in the menu tree do I enable what iptables needs??? I

What would be the proper steps to upgrade to 2.6.11 on centos 4.0 This is what I think... tar -zxvf linux-2.6.11.6.bz2 cd linux-2.6.11.6 make oldconfig - enter for all choies presented vi .config - change 8250_NR_UARTS to 36 to support 4 - 8 port rs232 cards make bzImage

Hi all, again i tryed Xen for normal home / development usage ... again i ran into a problem with it. There seems to be a problem with Xen 3.0.2 and nFORCE Motherboards. I used Xen 2 with nFORCE to and had a similar problem with performance earlyer and the List helped by telling to compile the Chipset Modules into the Kernel. I tryed this too on Xen 3.0.2 but with no sucess. The system boots

While I wait for the Xen 3.0 Test CD to download, has anyone has luck using an Asus M2N32-SLI Deluxe motherboard (NVIDIA nForce 590 SLI MCP chipset)? The CPU is an AMD Athlon64 X2 3800+ AM2 w/ 2GB DDR2 533. The motherboard mostly works under Gentoo using kernel 2.6.18 with the "noapic" kernel boot option in my grub.conf file. The only major issue with the Gentoo kernel

Hi, I encounter a error when installing the latest kernel 2.6.34 in centos. Steps: 1. download source code. 2.tar -xvf 2.6.34.tar.gz 3.use the .config file of current system in /boot directory. 4.make ,make modules_install, make install, 5.reboot. 6.error:: accur. Reading all physical volumes. This may take a while ... Activating logical volumes Volume group "VolGroup00" not found

From: "Bryan J. Smith <b.j.smith at ieee.org>" <thebs413 at earthlink.net> > I wrote a pre-sale evaluation back in January 2005 here: > http://lists.leap-cf.org/pipermail/leaplist/2005-January/000532.html > ... Tyan S2895 -- nForce Pro 2200+2050 Just know that the pre-sale evaluation was of the nForce4, and didn't take the nForce Pro 2200 and 2200+2050

What about the Asus M2N-SLI Deluxe motherboard? It has 7 SATA ports, supports ECC memory, socket AM2, generally looks very attractive for my home storage server. Except that it, and the nvidia nForce 570-SLI it''s built on, don''t seem to be on the HCL. I''m hoping that''s just "yet", not reported yet. Anybody run Solaris on it? Or at least on any

In addition to bug 70972 (Modesetting failure at 1280x800), there may be another bug affecting the NVIDIA GeForce 7150M/nForce 630M. I think that this is a separate issue from the above. When using KDE or Ubuntu Unity with nouveau on this GPU, there were artifacts and missing UI elements. I think that this is probably more likely to be a rendering issue rather than a display issue. I am not sure

Hi, Segate has released the ST3750640AS 750 GB sata drive. I would like to take two of these and plug in to a the Nvidia Nforce 4 Sata I/F an run Zfs on . ( I have installed SXCR build 40 on a shuttle SNP25 PC last weekend with some install problems I reported in the install-discussionlist ) I there any limitations anywhere in the path to the drive that would

I am using centos 5 x86_64 AMD64 X2 4200+. I am current on yum update. My machine has two ethernet cards. e1000 (eth0) and forcedeth (eth1) [root at fsdsigns2 ~]# more /etc/modprobe.conf alias eth0 e1000 alias eth1 forcedeth sometimes on boot the forcedeth driver thinks it is eth0: [root at fsdsigns2 ~]# dmesg | grep eth forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.

Has anyone installed Linux (CentOS or other) on a Tyan K8SE (S2892) motherboard? I'd really like to hear your experiences -- with this board or Nvidia's nForce Pro chipset in general. I'm looking to build a new server using this board but would like to find some other experiences first. I've googled myself blue but haven't found any reviews or postings regarding this

Hi folks. I,m thinking of purchasing an ASUS mother board with this chip set in it. NVIDIA? nForce? 430 MCP Lan= NVIDIA? nForce? 430 MCP built-in Gigabit MAC with external Attansic PHY. Any one know how well the chip set is supported. Any comments? Thanks John -- Guy Fawkes, the only man to enter the houses of Parliament with honest intentions, (he was going to blow them up!) Registered Linux

When using 4.4 to install on gigabyte GA-M51GM-S2 motherboard basically an Nforce 410/430 chipset then network is not initially detect to perform a network install. It let me attempt to manually select a driver but I do not see the driver in the list. After installing the network works and the forcedeth driver is loaded. Is there a way to get this driver detected or manually loaded? THanks,

hi i ve seen one of your replies here and i saw that you receomend 2 modifications in the kernel files in order to improve htb. first in pkt_sched.h, changing PSCHED_JIFFIES to PSCHED_CPU. and then, sch_htb.c, changing HYSTERESIS from 1 to 0. is it that simple? i mean i just change these here variables and i get better results? i ve done a search and found the first file in 3 locations. where

2016-01-03 20:11 GMT+01:00 Ilia Mirkin <imirkin at alum.mit.edu>: > On Sun, Jan 3, 2016 at 1:52 PM, Csányi Pál <csanyipal at gmail.com> wrote: >> So there is an AMD card too: >> VGA ASUS AMD Radeon R7 240, R7240-2GD3-L, 2GB DDR3, 128bit, >> 730/1800MHz, HDMI, DVI-D, D-sub >> >> What would be the best choice here: >> GEFORCE GT 730 >> or

Hi list, this days I''ve tried to update a 32bit XEN 3.0.4 system (kernel 2.6.16) to XEN 3.1.2 on AMD64 (kernel 2.6.18). The system has 2GB RAM and a 3ware 9500-12 SATA raid controller. The old system worked fine for about half a year now. The new system boots fine so far but when doing some "bigger" changes to the filesystem I get a lot of this errors: > PCI-DMA: Out of

Hello, Any one know how to enable Fiber Channel QLOGIC driver for xen kernel? This driver is available in CentOS4.3 as default. But when i compile xen-3.0.2-2 with linux-2.6.16 or xen-3.0.1with linux-2.6.12, the driver is not there. I tried to turn on QLOGIC by using "make menuconfig" and modified .config file but there is no change in /lib/modules/2.6.x-xen/kernel/drivers/scsi after