similar to: Re: Centos/RHEL with MGE UPS Protection Centers (usb)

OPENSOURCE wrote: > > I hope this answer your questions, and I hope you're ready to wait a bit > more. > Sure, NP for me, thanks for the feedback Arnaud. I have to admit that past days im having the syslog with a lil more activity from the new usb attached unit (ellipse ASR 1000 VA) Network UPS Tools: New USB/HID UPS driver 0.23 (2.0.2-pre2) Detected an UPS: MGE UPS

Hi all folks, Don't know if there's a copy of this notes in the CentOs mail-list, i include it for further references due it has important notes, Thanks Antoine Brenner for comments and suggestions, Have good day Jose. -------------- next part -------------- An embedded message was scrubbed... From: Antoine Brenner <antoine at gymglish.com> Subject: Centos/RHEL with MGE UPS

Dear List, I thought it might be useful if I wrote up my notes on getting an MGE UPS to work with NUT and openSUSE. The MGE UPS (an Ellipse 1500 USB) will work well with NUT and openSUSE 10.2, but not "out-of-the-box": there are some things you need to do: Intro. MGE have built rpms of NUT which greatly simplify installation. Merci MGE. I used the rpm's for nut-2.0.5 and the

Hi I try since a week to run my MGE Protection Center under Suse Linux 9.3. At the MGE site i found an HowTo. I have installed NUT an create the=20 configs but at boot the newhidups driver say=B4s "no USB/HID UPS found".=20= Anyone an Idea? Johannes Schatz=

Hello, I'm using NUT to manage a MGE Ellipse ASR UPS, with the newhidups driver. It works fine, except that after a few hours, I get a few errors from the kernel and the driver dies. Here's the output from the syslog: Apr 26 02:00:41 ezquiel kernel: usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 128 rq 6 len 255 ret -110 Apr 26 02:00:43 ezquiel last message repeated 2 times

I'm getting dmesg flooded with messages like this one: usbdevfs: usb_submit_urb returned -28 What's wrong? I'm using Linux kernel 2.4.32 and nut-2.0.3. The /etc/ups.conf contains [mgeups] driver = newhidups port = auto desc = "MGE UPS" Cheers, Rodrigo -- *** Rodrigo Martins de Matos Ventura <yoda@isr.ist.utl.pt> *** Web page:

Hello Mr Baart, 2006/3/11, R.J. Baart <R.J.Baart@prompt.nl>: > We are a reseller of MGE. Just sold 2 MGE Evolution 1100 UPS and 4 MGW powerswitches. > thanks for your choice and support. > But I have a problem with a new MGE Evolution 1100 UPS. After adding user=root I was able > to start nut. But the monitor won't work. I guess a problem with autorization. However I

Dear List, I have an MGE Ellipse 1500. I run openSUSE 10.2, kernel 2.6.18, libusb 0.1.12, nut 2.0.5. ps shows that the following processes are running: /usr/lib/ups/driver/newhidups -a mgeups /usr/sbin/upsd -u root /usr/sbin/upsmon /usr/sbin/upsmon NUT operates correctly, shutting down the server after 4 minutes without power. However I'm seeing 25 to 50 messages logged each day in

Hi, There is many (20 per day on average) messages like: kernel: usb 2-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -110 usbhid-ups[6768]: HIDGetDataValue: Connection timed out What can be done do correct that problem? best regards, Franck my configuration: debian etch nut 2.2.1 (recompiled source from testing to use latest version before posting here) updated

Hi Arnaud, Is there any news about this hardware,does nut managed it right now ? Is there any technical information to make it working on debian ? Thanks for your help, Regards, DaneZ _____ From: Arnaud QUETTE [mailto:Arnaud.QUETTE@mgeups.com] To: DaneZ [mailto:david.guillotte@danez.no-ip.org] Sent: Mon, 17 Jul 2006 09:07:03 +0200 Subject: Re: RE Fw: INFOSEC 500 XP

Hi, I'm running nut 2.0.3 on Gentoo connected to an MGE ProtectionCenter 675. newhidups intermittently crashes. Any ideas? N. # /usr/lib/nut/newhidups -a mgeups Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3) Detected a UPS: MGE UPS SYSTEMS/PROTECTIONCENTER Using subdriver: MGE HID 0.8 This is the error I'm getting *** glibc detected *** /usr/lib/nut/newhidups: double free or

Hello everybody, After succeeded in "tuning" nut-2.0.0's hidups and 2.0.3's newhidups on customized Linux kernels, we are now facing a new challenge : trying to install nut-2.0.5 on a RedHat ES4 which is based on a 2.6.9 kernel. I picked up the 2.0.5 source package and follow the INSTALL doc until step 6. So far so good. RH ES4 is managed by udev, therefore I presume we

Hi, I bought an Ellipse MAX 1100 a few months ago. First I attached it to my desktop and installed mge's personal solution pac. (a graphical interface which uses nut). It works. But I want to attach the ups to my server which runs without an x-server. I followed http://opensource.mgeups.com/install/debian.htm. Didn't work. Then I copied over the configuration files which the personal

Hello, I'll be back with my MGE Evolution 2200 connected with RS232 I upgrade nut 2.0.1 in nut 2.2 + psp as you ask me PSP autodetect my UPS and autoconfigure NUT. not really diffcult ! So I didn't change anything but I always have in my syslog these event Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale Nov 13 11:09:27 mezenc upsmon[3865]: Poll

On January 11, 2020 1:18:27 PM GMT+02:00, "Georgi D. Sotirov" <gdsotirov at gmail.com> wrote: >Hello, > >I'm experiencing a strange early shutdown behavior with the following >system: > > * */OS/*: Slackware Linux 14.2 x86_64 > * */NUT/*: 2.7.4 (from my own package > <https://sotirov-bg.net/slackpack/pack.cgi?id=4083>) > * */UPS/*: MGE

Hi, I have installed in suse 9.3 and ellipse premium 500 usb a psp 3.0 with yast2 and versions: nut-2.0.2-4 mgeups-psp-3.0.0-3 the first time that I launch psp it seems to contact the UPS and you can make changes to the parameters and all seems ok. If you make a reboot the psp hangs up and if you try /etc/init.d/ups it fails: Starting service NUT: -> Starting UPS driver: Network UPS Tools -

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

On January 11, 2020 3:42:15 PM GMT+02:00, Roger Price <roger at rogerprice.org> wrote: >On Sat, 11 Jan 2020, Georgi D. Sotirov wrote: > >> Jan 11 11:49:15 sotirov-bg upsmon[2677]: UPS mgeups at localhost on >battery >> Jan 11 11:49:15 sotirov-bg upssched[29746]: Executing command: >ups-on-battery >> Jan 11 11:49:15 sotirov-bg upssched-cmd: Unrecognized command:

hi i bought a ultra ULT31502 ups someone seem able to run this ups with nut just see Dean thread on: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=770423&Tab=11&NoMapp=0 i use suse 10.1, i installed nut the ups is connected directely to my computer with an usb cable lsusb return Bus 001 Device 004: ID 0d9f:0001 Powercom Co., Ltd with lsmod, i can see

Have recently purchased a MGE Nova 1100 UPS and am trying to get running on netBSD. Configuration netBSD 3.0 amd64 libusb 0.1.10a nut 2.0.3 Built & installed libusb Built kernel with ugen device and uhid removed Build & install nut-2.0.3 with usb Chmod /dev/ugen1 etc to allow access by nut user. Ups.conf [MGENova] driver = newhidups port = auto