similar to: '+' addesses and Foldered delivery

Hello, I have been tearing my hair out on this issue for 2 days, any help would be appreciated. We have a normal network and a Cisco SGE2010P switch - a 48 port PoE switch There are two VLANs, 1(data) & 50(VoIP). When Polycoms are connected to the switch with VLAN 50 hard coded in the config they grab a DHCP address from VLAN 1, the PVID for the switch port. The ports have membership in

Tearing our hair out on this one. Trying to install CentOS 5 x86_64 on a Supermicro X7DVL-E with 2 Xeon L5320 quad core CPUs, 3Ware SATA RAID controller in a mirrored setup and 4 GB of memory. Installation crashes at random places while copying the files. We've run memtest86 for 24 hours without any errors, replaced the RAID controller, motherboard and disks, but still no luck.

My server is running Rails 2.3.4...am I not doing this correctly or is something borked? >> c=Contact.last => #<Contact id: 24, name: "Larry", email: "larry-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org", phone: 2147483647, account_id: 8, created_at: "2009-11-27 18:16:25", updated_at: "2009-11-27 18:40:08", hide_name: false, hide_phone: false,

A week or so ago, I reported a problem on my new Windows XP box getting R 1.4.1 and R 1.5.0 (development from BDR's site) to save the .RData file upon program exit. Specifically, either clicking on the "X" in the GUI or invoking q() from the command line produced the following error: Error in save.image(name) : image could not be renamed and is left in .RDataTmp1 After some

Hi list, I'm trying to migrate from a workgroup based Samba server to a domain based Samba server. I need the following features - Roaming profiles - LDAP based user administration / authentication I think the LDAP part is mostly doable, though I do foresee some hair tearing, but my main concern is with the roaming profiles. Users do not have a fixed workstation and log-on to whichever

Ok, I'm tearing my hair out trying to get Asterisk moh streaming to work. After several hours jerking around with icecast and muse, I tried to point my asterisk system directly at two streams I know work. This is what extensions.conf has: [default] mode=quietmp3 directory=/var/lib/asterisk/mohmp3 [stream2] mode=custom directory=/var/lib/asterisk/mohmp3-empty

Greetings, I am trying to build a Centos 6.4 LiveCD using the config provided per Centos minimal Live kickstart using command: livecd-creator --config=centos-livecd-minimal.ks --fslabel=c6min-live --debug --verbose --cache=ssclone-rpm-cache --logfile=ssclone.log I included rsync, samba and mc in the kickstart file The build succeded in making an iso but the iso fails to boot on KVM based vm

Greetings, I am tearing my hair at getting this to work under centos 5.5/Ubuntu 10.04. Any suggesstions (Repos, RPMs etc)? My MB Intel embedded NIC blow up after a lightning (Mumbai get _real_ heavy mansoon rains inter alia). I want this to make work under Centos 5.x (and 6.x subsequently who DVD I have been downloading with a pithy 128kbps connection). -- Regards, Rajagopal

Been tearing my hair out trying to find out if redirecting my user's automounted home folder is killing offline files availability. We are just now migrating our windows users to win7 (school, limited funding), and while I've got folder redirection working, I also need to make sure offline files work as well for my mobile users. What smb.conf settings are required that will fix this

Hi, I noticed your message in the digest and I'm having the same problem. I can get into my Win98 machine use smbclient, but I want to mount the drive in /mnt. But when I go to do that, it whines about client names and the like. Have you managed to do it? If so, can you let me know how as I'm almost tearing my hair out here! - Stuart Luscombe

I've been tearing hair out for days over this stuff ... hopefully someone here can enlighten me further. I've managed to get wine to the stage where it appears to be installed as per the codeweaver site .... have tried both the "fake_windows" & windows partition methods, but in both cases when I try running any windows application installer it bombs out within seconds,

Sorry to bother you with a Rails "newbie"-like question, but I have been tearing my hair out for a couple of days with the deployment scenario I am trying to setup. I use a service provider that supports multiple domains via Virtual Hosts. I have all the software installed and "working". I want to deploy two apps under my domain and have the following in my .conf file:

<overly trimmed> On 02/25/2015 01:56 PM, Ashley M. Kirchner wrote: > Ok, so some of this now works, but I'm still having problems. With the > bootif option, the system now correctly configures and uses the same > interface to get its kickstart file. However, when the system is done and > boots up, the interfaces are still messed up. So this is what I have in the >

Hi, The subject line pretty much says it all. Oh, that plus I'm tearing my hair out trying to get it all to play nice together. rsync version = 2.5.5 protocol version 26 OpenSSH_3.5p1, SSH protocols 1.5/2.0, OpenSSL 0x0090608f cygwin -- downloaded in the last 3 days from official mirrors. I'm trying to make one Win2k box rsync with another Win2k box. I managed to get it such that an

OK, I have a routing problem, that seems to be working in the console, and with rake routes but not in the app. I have people that have nested tasks, like so: ------------------------------- # routes.rb map.resources :people do |person| person.resources :phone_notes person.resources :documents person.resources :tasks, :member => {:complete => :put} end map.resources :tasks, :member

I''ve pared my rjs experiment down to what seems a bare minimum. When I click on my link_to_remote, the rjs executes, returns the correct javascript to the browser, but it doesn''t update the div I''ve specified. What appears to be coming back from the controller is: Element.update("my_form", "hello, rjs"); I''m tearing my hair out.

Hello list! I'm tearing my hair out over this. I have a USB flash drive that has been working nicely with SYSLINUX for about a year, and I have upgraded SYSLINUX on it a couple of times during that period with no ill effects - including a complete format/re-install from scratch. However, on Friday I was using this drive (and it was working) and I decided to upgrade to the latest version

Hi All, We have a PHP site running on apache 1.3 and Im trying to graft typo onto it at /blog/. Ive got the running using the symlink method but apache/fastcgi are clunky to say the least so I want to move typo over to lighttpd. Ive got this all working and Im now trying to get a proxy working through from apache. Im using this: RewriteRule ^/blog/?(.*)$ http://blog.myorg.net:8080/$1 [P]

Arrggghh. Tearing my hair out here. I'm trying to set up the spa3000 in the UK for my home, and want * to control the dial plan I've googled to no avail. I've read the manual to no avail. Can someone, please let me know what the parameters is the spa and * are to a) receive a call from the pstn b) make a call to the pstn from the phone attached I can make sip to sip calls (i.e. I

I've been tearing my hair out trying to get this to work. Problem: Samba versions 2.2.4 and 2.2.5, running on mandrake 8.2 and 8.1 respectively, both with XFS (the mdk 8.2 machine is using a STOCK kernel 2.4.18-6mdk), the mdk 8.1 machine is using a stock 2.4.18 + xfs 1.1 patch. Windows 2000 SP2 client tries to copy a folder with files in it to the share. Copy seems to start but ends rapidly