similar to: Multi-Card reader (SD, MMC, etc) and CONFIG_SCSI_MULTI_LUN kernel option in 34.0.2. Workaround

> > Well, i''m using here the qla2340 on several boxes. It works > > with Xen 2.0 but noch with Xen 3.0. as part of SUSE Linux 10.0: > > Interesting. If the driver really doews work flawlessly in > Xen 2, then I think the culprit has to be interrupt routeing. > > Under Xen 3, does /proc/interrupts show you''re receiving interrupts? I cannot boot with

> > Well, i''m using here the qla2340 on several boxes. It works > > with Xen 2.0 but noch with Xen 3.0. as part of SUSE Linux 10.0: > > Interesting. If the driver really doews work flawlessly in > Xen 2, then I think the culprit has to be interrupt routeing. > > Under Xen 3, does /proc/interrupts show you''re receiving interrupts? I cannot boot with

Hi folks, Just updating clamav 'bundle' from old 'clamav-server' (i think the just previous) and i noticed that the 'clamav' user/group for this pkg is not created by default by the rpm pkg. At the same time, the /var/log/clamav is not updated/created with clamav.clamav ownership, Don't know if it is my actual config (previous one untouched anyway), but this is what

Hi folks, Backing up a host as noted below im getting over and over again the same issue on actual kernel, details: - Backup host has a pci/usb2.0 card, with a 250gb usb 2.0 disk attached, - Celeron 900 family - Remote host, local console from boot linux rescue: # dd if=/dev/hda conv=sync,noerror | ssh -c blowfish root at 192.168.0.6 "dd of=/media/backup/vol-hda.raw.img" - Backup

This is one of those autoloaders where the tape drive and the library share a SCSI ID, but are on different LUN's - specifically the library should be on LUN 1. Apparently since so many devices like this are broken, recent kernels don't probe beyond the first LUN, so it's not detecting the library. My /proc/scsi/scsi output: Attached devices: Host: scsi4 Channel: 01 Id: 00 Lun:

CentOS 4.3 (fully updated, including CentOS Plus kernel). Running KDE 3.5.2 (fully updated from redhat.kde repo). I can't seem to get the OS to recognize my SD card when inserted into my USB card reader. Mepis 6 Beta 3 has no problem with it. DMESG sees nothing happening when the card is inserted. USB-STORAGE module is loaded.

Hello, I try to passthrough an usb 1.1 device (floppy drive) to a domU. Dom0 and domU are based on opensuse11.4. I did the follwowing in dom0 --snip-- xenserver:~ # xm usb-list-assignable-devices 3-1 : ID 0644:0000 TEAC TEAC FD-05PUB 3-2 : ID 0644:0000 TEAC TEAC FD-05PUB xenserver:~ # xm usb-hc-create vdrserver 1 2 xenserver:~ # xm usb-list vdrserver Idx BE

Hello all. I'm struggling to get Centos 4 to recognize my Dell Powervaul 132T tape changer. The system doesnt create a device node for it. [root at orion scotty]# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SEAGATE Model: DAT DAT72-052 Rev: A060 Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 01 Lun:

Hi all... I have a scsi Tape library. Centos only sees the tape drive portion of the library. I need to enable Multiple LUN support to get the library and tape drive recognized. I am looking for some help enabling multiple lun support in Centos 4. I had a procedure on how to do this in the 2.4 kernel but it doesn't seem to work in the 2.6. Any help would be appreciated. Config:

Hello, I have a weird problem after adding new PV do LMV volume group. It seems the error comes out only during boot time. Please read the story. I have couple of 1U machines. They all have two, four or more Fujitsu-Siemens SAS 2,5" disks, which are bounded in Raid1 pairs with Linux mdadm. First pair of disks has always two arrays (md0, md1). Small md0 is used for booting and the rest - md1

Hello all: I am using exactaudio copy (EAC) with wine on linux (suse 10.1) So far I had no problems with drive recognition. Recently I've attached another drive to the IDE 0 slave port and this drive is not recognized by EAC/wine. Here is my 'cdrecord dev=ATA -scanbus' output: scsibus0: 0,0,0 0) * 0,1,0 1) 'TEAC ' 'CD-W512EB '

When it accesses a real floppy disk, it seems to do Hung when the boot disk of MS-DOS (Win95/98/Me) was able to be started by using ISOLinux. example) Not inserted Floppydisk A>dir b: error message A/R/F ? A> inserted Floppydisk A>dir b: ....hung.... It seems to do Hung in Real PC though the phenomenon like place tested with VMware was not Hung. There was no problem in a usual

I put a new server together with CentOS 4. This server is doing a number of functions including ntp, mail, and web server. I had a USB drive plugged in and it was working great. I could access it at /media/usbdisk and I copied lots of data to it. I felt the server was "complete" so I wanted to move it. I shut it down, moved it, etc. Everything is ok, except that I cannot access the

Hi! Here is my isolinux.cfg. It's slackware based. ====================== default Kernels/bare.i/bzImage initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=8192 rw root=/dev/ram ZILIX_KERNEL=bare.i prompt 1 timeout 1200 font lat1-16.psfu display mensagem.msg F1 mensagem.msg F2 opcoes.msg F3 help.msg label linux kernel Kernels/bare.i/bzImage append - label adaptec.s kernel

So I'm working with the iSCSI Initiator and an EqualLogic SAN. I'm not sure when this might have happened, but it appears that the /dev/sdc device is missing, yet the /dev/sdc1 partition exists AND is mountable. Is there a method to re-create the /dev/sdc device? I cannot dd or fdisk it, obviously, but I can mount the /dev/sdc1 partition and it works just fine. Not having the /dev/sdc

Hi All, Two and three-node clusters with SC3.2 and S10u3 (120011-14). If a node is rebooted when using SCSI3-PGR the node is not able to take the zpool by HAStoragePlus due to reservation conflict. SCSI2-PGRE is okay. Using the same SAN-LUN:s in a metaset (SVM) and HAStoragePlus works okay with PGR and PGRE. (both SMI and EFI-labled disks) If using scshutdown and restart all nodes then it will

OPENSOURCE wrote: > > I hope this answer your questions, and I hope you're ready to wait a bit > more. > Sure, NP for me, thanks for the feedback Arnaud. I have to admit that past days im having the syslog with a lil more activity from the new usb attached unit (ellipse ASR 1000 VA) Network UPS Tools: New USB/HID UPS driver 0.23 (2.0.2-pre2) Detected an UPS: MGE UPS

I am getting a wierd message with samba, I am running linux: bash# uname -a Linux sparkbox 2.0.0 #2 Tue Jun 11 07:12:12 CDT 1996 i486 I am running the newest version of samba (samba-1.9.18p3). The system I am on it acting as gateway for an internal network (ethernet) and an outside network (modem with ppp). my netstat looks like: bash# netstat -rn Kernel routing table Destination Gateway

I am running CentOS 4.4 and trying to bring up my tape library. When I do cat /proc/scsi/scsi, it shows only the drive and not the changer although both are shown when the Adaptec card initializes. I recall in the distant past that I had to do "something" to get the kernel to properly scan the SCSI bus for the additional LUN but I cannot for the life of me recall what that was. It

I''ve compiled the 3.0-devel version on SUSE Linux 9.3. The ony problem is the qla2300 driver, which will not start all correctly on boot. So i cannot see other partitions than sda. --------------------------------------------------------------------------------- QLogic Fibre Channel HBA Driver ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 24 (level, low) -> IRQ 185 qla2300