similar to: Centos 4.4: Support for Dell PowerEdge 830 CERC 6-Channel SATA RAID Controller

Hello, There's been a lot of talk lately about raid controllers :-) I'm thinking about buying a Dell Poweredge with the Dell CERC SATA RAID Controller, 64MB Cache. It'll be either a P4 or a 64bit Xeon. Does CentOS4 recognize these controllers fine? Any extra driver needs to be installed? Thanks, Francois

Hello, does anyone run xen on an dell poweredge 750 ? I am getting the following scsi errors on the raid driver on hight I/O load. aacraid: Host adapter reset request. SCSI hang ? aacraid: SCSI bus appears hung with kernel 2.6.8 the whole maschine hang on this error. now I am using xen 2.0.6 with kernel 2.6.11.10 and the latest aacraid driver from adaptect. so the device only hang ca 1:30

Hello, I am having issues making my box boot with Xen. I am working with linux-2.6.16.28-xen on a gentoo box. The server is Dell PowerEdge 1850 with Perc 4e/Si, FW 521X. When dom0 reaches the point of scanning the SCSI controllers, it hangs in a loop aic7xxx_dev_reset_returns 0x2002. My regular (non-xen) kernels come up fine with detecting my adaptec scsi controller. Had anyone had the same

Hi, I am trying to use the Simple Menu system for SYSLINUX/ISOLINUX, but it fails to work. The menu apper, I can select menu entries, but pressing "ENTER" just takes me back to start. It seem like menu.c32 just reloads. Pressing Space does almost the same, exept the selected item is the one on the bottom instead of the top. By pressing ESC and getting back to command line, I am able

The raid card is an Adaptec 2100S. -----Original Message----- From: Josh Paetzel [mailto:josh at tcbug.org] Sent: Saturday, November 11, 2006 9:35 AM To: tclug-list at mn-linux.org; pjcrump at bitstream.net Subject: Re: [tclug-list] Drives Not Recognized on Dell Poweredge 1550 CentOs install On Saturday 11 November 2006 01:20, Phillip Crump wrote: > I have a new (used)Dell Poweredge 1550

Hello, I''m using Xen 4.0.0 compiled from source with the 2.6.31.13 kernel that it pulls down on its own. I added support for the aacraid driver to the kernel using ''make menuconfig'' from the build-linux-2.6-pvops_x86_64 subdirectory, and then built and installed the whole thing using ''make install'' from the xen-4.0.0 directory. I compiled this

Hallo, has anyone a hint how to use an Adaptec RAID 51645 under Centos 7? A volume is created using the controller interface but isn't active under centos. Thanks for hintsts Ralf

I've got myself an Adaptec 2200 HW RAID card to play for couple of days. Tha card uses aacraid device driver. Seems to work nicely, however just wandering if there's a tool (prefferably CLI) for CentOS that can read out RAID configuration data, status of individual drives, maybe even manage (create/delete) RAID devices? Thanks for any and all pointers.

Does Centos include any runtime monitor/control software for raid arrays on AACRAID devices as on IBM 3650's? -- Les Mikesell lesmikesell at gmail.com

Greetings, I just got new Dell PowerEdge SC1420 and a 6 channel SATA RAID controller card (Adaptec 2610SA from Dell also) When I attempt to install CentOS 4.2, it doesnt find the RAID 1 mirror I set up. (2 X 160Gig drives) It doesnt find any hard drives at all. Does anyone have anything to suggest here? Thanks Ryan

I've found a problem with CentOS 3 latest kernel (2.4.21-27.0.1.ELsmp) and megaraid2 driver. Hardware: Dell PE1600SC with CERC ATA100 RAID controller The problem is somewhat similar, but not identical as: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=123289 After updating new glibc and kernel packages the new kernel don't boot. Boot fails to mount root fs with "Cannot open

Folks, Mercurial is selectable as an installation in OpenSUSE 10.3 YAST. I have done the following: hg clone http://xenbits.xensource.com/xen-unstable.hg hg clone http://xenbits.xensource.com/linux-2.6.18-xen.hg make dist sh ./install.sh I tried running the following to create the initrd but it failed: Depending on your config, you may need to use ''mkinitrd'' to

Hello, While shopping for another 3Ware card, I found that this market has gotten much larger since I bought my 6500. So I started looking at the various cards while browsing the hardware notes for FreeBSD 4.8 and 5.1. So I'm wondering if anyone can provide some insight here. -3Ware has a whole new series of cards. The twe(4) manpage states that only 5xxx and 6xxx series cards are

This isn't exactly a Centos question but maybe someone here can help: Does the AACRAID controller (as in an IBM 3550) store its config info on the drives or internally? I only have one of the boxes and want to load Centos 3.x on several drives which can be swapped into servers at another location. With SCSI, all that took was a full disk dd copy and a little fiddling with the HWADDR for the

Hi all I?ve got a few Intel Z87 chipset machines with Adaptec 5405 raid cards (latest firmware), they work fine on 3.18 but during Dom0 boot using kernel 4.9.13 it hangs at ?Using clocksource tsc? and the aacraid driver keeps trying to reset Has anyone seen anything like this? I?ve tried specifying clocksource=xen in grub instead of the default of tsc, and that has the same issue. HPET is

> Like I just mentioned in a different thread, I need to use > the ''noapic'' > options on both the PowerEdge models I''ve tried.. I''ll try to > build up a Xen vs. non-Xen kernel tomorrow or Tuesday and > grab a diff for you. Which PE models are they? We have quite a few different Dell PowerEdge models running 24x7 in the test lab, and

I am hoping I can get a little light she on a problem I am having trying to bring up a guest domain. I suspect that the problem is in my supplied file system First the environment. VT enabled dual core EM64T processor, Asus Mb (I can get the exact chipset infor if relevant) 2 Gig of DRAM SATA drives. I have build and booted the domain 0 using 3.0.2-2 version of xen. This seems ok.

While using mkinitrd on debian sarge, it gives the following error: mkinitrd -v -f --with=aacraid --with=sd_mod --with=scsi_mod initrd-2.6.16-xen.img 2.6.16-xen /usr/sbin/mkinitrd: illegal option -- v $Id: mkinitrd,v 1.201 2004/05/16 22:00:48 herbert Exp $ Usage: /usr/sbin/mkinitrd [OPTION]... <-o outfile> [version] Options: -d confdir Specify an alternative configuration directory.

Hello everyone, I''m totally new to Xen and trying to run it on some platforms (x86, x64) using SLES (that is what I have to use for reasons other than technical). Several machines on which I tried using Xen simply fails to run normally using Xen kernel: either network communication is not functioning at all despite proper configuration (that works on non-Xen kernel), or the kernel

Last week we tried to install Centos on a brand new HP ML150 G2 with AIC-8130/ Marvell SATA Raid card and it was a no go. We tried a few other flavors of Linux as a test and all had trouble as well. Unfortunately time didn't permit so we opted for a Windows solution to get the box into production. We have never had a problem with IDE and Embedded SATA (Non Raid) Next time we want to