Displaying 20 results from an estimated 1700 matches similar to: "compaq r4000"
2005 Dec 20
1
compaq v2000 working with correct boot options and compaq r4000 still SLOWWW
Hi,
I have a v2000 compaq laptop. The realtek network and USB on this
machine was not working. After adding to grub.conf
"acpi=off apci=off noacpi noapic"
the v2000 realtek started working and the USB worked fine... Fantastic!
So I thought I would try those same options on my r4000 laptop.
they had no effect.... This AMD turion 64 4000+ rating laptop is still
running SLOWWW...
2005 Dec 28
1
compaq r4000 and new kernel 2.6.14.5 (used to be sloowwww r4000)
I finally got the time to try the new kernel.
recompiled it and now the compaq r4000 seems like an amd 64 4000+.
THe issues of sloowww ness seemed to have gone away.
Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20051228/e8f151a7/attachment-0001.html>
2005 Dec 13
6
compaq r4000 /proc/cpuinfo reports 997 and should be 2400
Hi
I have a compaq R4000 with the 2.4GIG AMD 64 bit. 4000+ rated.
proc cpuinfo reports
cpu Mhz as 997.481
Do I have to run the 64 bit version to have things run correctly?
I just have the normal 4.2 loaded at this time.
The laptop seems slow for 4000+ as reflected by the cpu Mhz also.
Any thoughts on running the 32 bit version of 4.2 vs the 64 bit version
of 4.2?
Jerry
2005 Dec 13
1
compaq r4000
Anyone tried installing centos 4.2 on an compaq R4000?
The CD boots, I hit enter, starts uncompressing the kernel
detects my disks (last thing I see) then the screen is BLANK.
I tried "linux text" also and exact same thing happens.
THanks,
Jerry
2005 Dec 28
2
compaq r4000 and new kernel 2.6.14.5 (used to be sloowwwwr4000)
Jerry Geis wrote:
>/ I finally got the time to try the new kernel.
/>/ recompiled it and now the compaq r4000 seems like an amd 64 4000+.
/>/
/>/ THe issues of sloowww ness seemed to have gone away.
/
>Which kernel did you end up with?
>Cheers,
Chris,
The subject line mentioned 2.6.14.5, I downloaded it from kernel.org today.
Jerry
-------------- next part --------------
2005 Dec 20
0
compaq v2000 working with correct boot options andcompaq r4000 still SLOWWW
Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote:
>/ So I thought I would try those same options on my r4000
/>/ laptop. they had no effect.... This AMD turion 64 4000+
/>/ rating laptop is still running SLOWWW...
/>/ /proc/cpuinfo has the cpu Mhz running at 2393
/
Yes, the 4000+ is 2.4GHz.
>/ below is my dmesg output for
2008 Oct 30
2
no network kernel boot option
I am looking for a kernel boot option that specifies "nonetwork"
I have found in searching the nousb - nopcmcia etc.... but I have not
found one for nonetwork.
Is there one and what is it called?
Thanks,
Jerry
2006 Jul 18
1
AW: AW: Problems with installation
I will install CentOS 4.3 and downloaded the driver disk from Dell for
RedHat Enterprise Linux 4:
Description: Dell PowerEdge RAID Controller 5 Device Driver for Red Hat
Enterprise Linux 4.0, X86 & X86_64
I saw a few minutes ago that the driver disk is extracted within
/tmp/ramfs/DD-01. Therfore I know that the network is working correct. I
will try to extract the module and insmod/modprobe
2005 Dec 13
4
compaq r4000 32 bit and 64 bit install
Gents,
I first installed the 32 bit version (as you might have read) of centos 4.2,
after downloading x86_64 the install process/progress is about the same.
going VERY slow...
The screen for formatting the partitions took a LONG time
(3 partitions 10 GIG, 2 GIG swap and 50 GIG).
While on that screen and moving the mouse it lagged big time and
could not keep up.
Anyway just reporting that so far
2008 Apr 16
1
Centos 5.1 - Xen/ domU related booting questions
Hello,
I successfuly run Centos 5.1 domU in Centos 5.1 dom0.
But I still have some minor issues/errors/warnings while
booting I'd like to fix and here are my questions:
1. How to disable loading usb host controler module:
[...from dmesg... ]
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
insmod: error inserting '/lib/uhci-hcd.ko': -1 No such
2016 Dec 18
3
[PATCH 1/2] launch: Rationalize how we construct the Linux kernel command line.
This is just code refactoring.
---
src/launch.c | 172 +++++++++++++++++++++++++++++++++++++----------------------
1 file changed, 109 insertions(+), 63 deletions(-)
diff --git a/src/launch.c b/src/launch.c
index 46d7ab9..84d5e82 100644
--- a/src/launch.c
+++ b/src/launch.c
@@ -293,9 +293,7 @@ guestfs_impl_config (guestfs_h *g,
#endif
#if defined(__aarch64__)
-#define EARLYPRINTK "
2005 Dec 14
3
compaq R4000 update (hogging interrupts)
After a couple hours last night....
doing a "killall -SIGUSR1 cpuspeed" bumps up the /proc/cpuinfo
information for cpu mhz to 2393 Mhz. I did notice a little increase
after that. However, the machine is still sluggish.
I did a "hdparm -c 1 /dev/hda" but really did not notice any difference.
I tried to download fglrx64_6_8_0_8.16.20-1.x86_64.rpm from ati
(also 8.20.8) and get
2007 Aug 02
0
Booting LiveCDs or Installation CDs with Xen support in a Dom0
Hi,
In the installation docs for a Solaris Xen 07/07 DomU (http://www.opensolaris.org/os/community/xen/docs/install-solaris-domu-iso.htm) the config file for the Solaris DomU is
name = "solaris-install"
memory = "1024"
disk = [ ''file:/ws/public/isos/65-0604-nd.iso,6:cdrom,r'', ''file:/export/root/solaris_domu/disk.img,0,w'' ]
vif = [
2005 Mar 07
0
compact flash, fat, reduced knoppix and syslinux
Hi.
I've recently picked up a 256MB compact flash card and
CF->IDE adapter.
I'm wanting to put a smaller version of knoppix on
here. I came across miniknoppix here:
http://www.inittab.org and decided to have a play
around with that.
So far I have opened up the ISO image and copied all
the files out. I have put a boot sector onto the CF
by putting the CF into the IDER adpater then
2006 Jan 12
1
I have installed CentOS 4.2 on an AMD based machine usingthe ATI chipset (xpress 200) and I am hav
Chris,
I have a compaq AMD r4000 x86_64. grabbing the latest kernel
and compiling it fixed my clock skew.
I have not had any slow disk issues. again the kernel may help
doing the command:
killall -SIGUSR1 cpuspeed makes the CPU run faster.
Hope that helps.
Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2005 Dec 27
1
current kernel 2.6.14.X
Is there a location for centos 4.2 that has a current kernel
compiled and ready to just install for the 2.6.14.X kernel? I am
wondering if a current
kernel helps with my slowww compaq r4000 amd64 machine.
Thanks,
Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2005 Aug 14
1
expert guideance needed on arrays with CentOS 4 installed on dual processor compaq server
greetings,
as most know i have some older dual processor Compaq playtoys that i am
deploying CentOS 4 on and doing some real world'ish simulation of failure
and regular server environment testing.
i have searched www on some things to no avail so off to the experts for
some guideance please?
case of:
a dual Pentium 3 processor 1850R with a smart array 221 controller and
quantity (4) 18 Gig
2005 Sep 16
2
Boot/init problem with IBM Netfinity 4500
I hope the CentOS people don't mind me cross-posting for their input.
I've just done a clean, text-mode minimal WBEL4 install on an IBM
Netfinity 4500, essentially the same hardware as an xSeries 340.
The install went fine but now the box will boot, run through the
initrd init sequence, perform its switchroot then hang here...
SELinux: Initializing.
SELinux: Starting in permissive mode
2007 Apr 30
3
syslinux booting from a third partion of ipod.
Hello,
I hope that somebody can help me, I am trying to boot Knoppix from the third
parition of an ipod nano with out loosing the player capabilities. After
fdisk I have the following partitions:
slr ~ # fdisk -l /dev/sda
Disk /dev/sda: 4095 MB, 4095737344 bytes
255 heads, 63 sectors/track, 497 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End
2002 Aug 07
3
Removing Printer Driver on Samba 2.2.5 using rpcclient
Hi All.
Can anyone give me a hand here?
I'm trying to remove some printer drivers from my samba server running on
FreeBSD 4.6 using rpcclient.
'enumdrivers' shows:
rpcclient $> enumdrivers
[Windows 4.0]
Printer Driver Info 1:
Driver Name: [hp deskjet 930c series]
[Windows NT x86]
Printer Driver Info 1:
Driver Name: [HP DeskJet 930C Series]
Printer Driver Info