Shorewall users - May 2005 - Two gateways

Hi, i have shorewall installed in my firewall and i have one big problem:

My network is:

Link Ethernet 1 = eth0 = IP: 200.215.203.2
Link Ethernet 2 = eth1 = IP: 200.137.193.2
DMZ               = eth2 =  IP: 200.137.193.33
LAN               = eth3 =   IP: 192.168.0.3
GIGABIT       = eth4 =   IP: 192.168.1.0


My problem is:

How i do to my dmz going to internet to eth1 and gigabit and lan zone 
going to internet to eth0?

I put in /etc/sysconfig/network gateway set to eth0 and ifcfg-eth0 file 
(gw 200.215.203.1) ifcfg-eth1 file (gw 200.137.193.1), but dont work....

How i do this in shorewall?

tks

Marcelo Leão Caffaro wrote:
> 
> I put in /etc/sysconfig/network gateway set to eth0 and ifcfg-eth0 file
> (gw 200.215.203.1) ifcfg-eth1 file (gw 200.137.193.1), but dont work....
> 
> How i do this in shorewall?
You must set up your routing correctly -- see Shorewall FAQ #38. That
will show you how to set up Shorewall and gives you an example of how to
use two internet gateways. Beyond what is there, anything different you
want to do with assigning traffic to gateways is a routing issue, not a
Shorewall issue.

-Tom
-- 
Tom Eastep    \ Nothing is foolproof to a sufficiently talented fool
Shoreline,     \ http://shorewall.net
Washington USA  \ teastep@shorewall.net
PGP Public Key   \ https://lists.shorewall.net/teastep.pgp.key