search for: zttranscode

...do it from scratch. Having read the majority of the "Asterisk: The Future of Telephony" I am now attempting to compile zaptel 1.4.0 and am receving the very same series of errors mentioned in this post on the forums: http://forums.digium.com/viewtopic.php?t=13619&highlight=zaptel1+++zttranscode++error However, there has been no solution offered to this issue. I am running 2.6.20-1.2925.fc6. I have combed through the various suggestions for issues compiling zaptel. I do have the kernel-devel package installed and the proper sym links, etc. When performing 'make linux26' it blows...

I was just looking to see if anyone else has seen this problem as well. When asterisk starts up it loads the zttranscode module. The problem exist when I use the init scripts to stop asterisk and then use the zaptel init script to unload modules. Since the zaptel init script didn't load the zttranscode module it will error out when trying to unload the modules. I built zaptel/asterisk/libpri (all latest releas...

Hi, does anybody know what *zttranscode *module* *is for*?* Thanks!! Giorgio -- _________________________________________________ Giorgio Incantalupo, mailto:gincantalupo@fgasoftware.com FG&A srl - http://www.fgasoftware.com - Voice@Work - The Agile PBX http://www.voiceatwork.eu Tel: 02997663.14, Fax: 0291390172

I'm getting the following error trying to compile zaptel 1.4.0-beta2 on my RH9 (2.4.20-8smp) system. Can anyone shed some light on this? zttranscode.c: In function `zt_tc_mmap': zttranscode.c:387: warning: passing arg 1 of `remap_page_range_Rsmp_d8cd9cb2' makes pointer from integer without a cast zttranscode.c:387: incompatible type for argument 4 of `remap_page_range_Rsmp_d8cd9cb2' zttranscode.c:387: too few arguments to functio...

...ard TC400P installed in server running Debian with Asterisk 1.4.23. Everything seams to be fine and after I boot up server I see in dmesg: 7.590966] Zapata Telephony Interface Registered on major 196 [ 7.590966] Zaptel Version: 1.4.12.1 [ 7.590966] Zaptel Echo Canceller: MG2 [ 7.610963] zttranscode: Loaded. [ 7.618969] wctc4xxp: tc400b0: Attached to device at 0000:02:07.0. [ 7.618969] firmware: requesting zaptel-fw-tc400m.bin [ 8.111186] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 11.400359] wctc4xxp: tc400b0: (G.729a / G.723.1) Transcoder support L...

Anybody, I have download asterisk 1.4 via svn. whem I compiled it, I got the following error: /lib/modules/2.4.33.3/build/include/asm/system.h:190: warning: dereferencing type-punned pointer will break strict-aliasing rules zttranscode.c:37:30: linux/page-flags.h: No such file or directory make[1]: *** [zttranscode.o] Error 1 make[1]: Leaving directory `/home/kingkong/code/projects/asterisk/source/zaptel-1.4' make: *** [all] Error 2 Any comments? Regards, Demuel

...the patch went in O.K.) ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 17 (level, low) -> IRQ 22 wcfxo: DAA mode is 'FCC' Found a Wildcard FXO: Wildcard X100P Notice the choice of echo canceller.... If I look at what modules are installed: # lsmod Module Size Used by zttranscode 6280 0 ztdummy 3432 0 wcfxo 9760 0 zaptel 200120 7 zttranscode,ztdummy,wcfxo crc_ccitt 1792 1 zaptel No oslec :-( In my kernel modules/misc directory I have: -rw-r--r-- 1 root root 10727 2007-10-24 14:44 oslec.ko -rw-...

...cfg install pciradio /sbin/modprobe --ignore-install pciradio && /sbin/ztcfg install ztd-loc /sbin/modprobe --ignore-install ztd-loc && /sbin/ztcfg install ztdummy /sbin/modprobe --ignore-install ztdummy && /sbin/ztcfg alias wcfxs wctdm alias wct2xxp wct4xxp install zttranscode /sbin/modprobe --ignore-install zttranscode && /sbin/ztcfg install wct4xxp /sbin/modprobe --ignore-install wct4xxp && /sbin/ztcfg However: [root@Aiur zaptel-1.4.0]# modprobe zaptel FATAL: Module zaptel not found. /var/log/dmesg doesn't say anything about zaptel....

Hi, I'm very new to asterisk and managed to set one up in debian, I installed via apt-get the asterisk and asterisk-bristuff packages. I downloaded the bristuff source as well. I managed to get as far as loading the following modules: zaptel 199144 4 cwain,zaphfc,zttranscode,ztdummy But the problem now is that all channels that I try to configure gives me an error that that device/address doesn't exist ..and only one unconfigured device is displayed in zttool. Does anyone have any experience with this type of card? care to share some tips? 0c:02.0 ISDN contr...

...tel-1.4.0/zaptel.o /usr/src/zaptel-1.4.0/zaptel.c:226: warning: `fcstab' defined but not used CC [M] /usr/src/zaptel-1.4.0/ztd-eth.o CC [M] /usr/src/zaptel-1.4.0/ztd-loc.o CC [M] /usr/src/zaptel-1.4.0/ztdummy.o CC [M] /usr/src/zaptel-1.4.0/ztdynamic.o CC [M] /usr/src/zaptel-1.4.0/zttranscode.o CC [M] /usr/src/zaptel-1.4.0/wct4xxp/base.o HOSTCC /usr/src/zaptel-1.4.0/wct4xxp/fw2h /usr/src/zaptel-1.4.0/wct4xxp/fw2h /usr/src/zaptel-1.4.0/wct4xxp/OCT6114-128D.ima /usr/src/zaptel-1.4.0/wct4xxp/vpmoct128_fw.h /usr/src/zaptel-1.4.0/wct4xxp/fw2h /usr/src/zaptel-1.4.0/wct4xxp/OCT6114-64D.i...

Hi all. When i do a "service zaptel stop" on my machine,sometimes it crash and i must unplug and plug the power cord to restart the machine. Also sometimes load zttranscode and wct4xxp, and oter times wct4xxp only... it's running centos 4.4, libpri 1.2.4, zaptel 1.2.17.1 and asterisk 1.2.18. with a TE212P. Can somebody help me? Regards.

I'm running asterisk/zaptel 1.4.5. If I load the ztdummy module, the dialplan hangs when it tries to play audio (i.e. Playback) -- and I just hear static on the line. I'm running this on a debian system. I actually have it working on a different debian system but have yet to discover the important difference between the two installations. Any advice on where to look? Thanks John

...some kernel config? Regards, Atis My /etc/zaptel.conf is span=1,4,0,esf,b8zs span=2,3,0,esf,b8zs span=3,2,0,esf,b8zs span=4,1,0,esf,b8zs #lspci 07:03.0 Communication controller: Digium, Inc. Wildcard TE405P Quad-Span togglable E1/T1/J1 card 5.0v (rev 02) #lsmod | grep -P "(zap|zt|wc)" zttranscode 17808 0 wcusb 25088 0 wctdm 46272 0 wcfxo 21536 0 wctdm24xxp 121024 0 wcte11xp 34848 0 wct1xxp 23456 0 wct4xxp 323904 96 zaptel 202984 215 zttranscode,wcusb,wc...

...ethdlc ]; then \ install -D -m 755 sethdlc /sbin/sethdlc ; \ fi if [ -f zttool ]; then install -D -m 755 zttool /sbin/zttool; fi for x in zaptel.ko tor2.ko torisa.ko wcusb.ko wcfxo.ko wctdm.ko wctdm24xxp.ko ztdynamic.ko ztd-eth.ko wct1xxp.ko wcte11xp.ko pciradio.ko ztd-loc.ko ztdummy.ko zttranscode.ko; do \ rm -f /lib/modules/2.6.9-42.0.3.ELsmp/extra/$x ; \ done; \ make -C /usr/src/linux SUBDIRS=/usr/src/zaptel-1.2.13 INSTALL_MOD_PATH= INSTALL_MOD_DIR=misc modules_install; make[1]: Entering directory `/usr/src/kernels/2.6.9-42.0.3.EL-i686' INSTALL /usr/src/zaptel-1.2.13/pci...

...fault) (Slaves: 16) Channel 17: FXS Kewlstart (Default) (Slaves: 17) Channel 18: FXS Kewlstart (Default) (Slaves: 18) Channel 19: FXS Kewlstart (Default) (Slaves: 19) Channel 20: FXS Kewlstart (Default) (Slaves: 20) 20 channels to configure. cat /proc/modules --------------------------- zttranscode 11784 0 - Live 0xf89b8000 ipv6 251393 18 - Live 0xf8ae8000 autofs4 24517 2 - Live 0xf8a5a000 sunrpc 144253 1 - Live 0xf8a79000 wcusb 18048 0 - Live 0xf89b2000 wctdm 37312 0 - Live 0xf89a7000 wcfxo 15008 0 - Live 0xf88bb000 wcte11xp 26656 0 - Live 0xf8961000 wct1xxp 17184 0 - Live 0xf88a0000 wcte12x...

Hello All, I would like to upgrade my recently installed Asterisk 1.2.21.1 to Asterisk 1.4.8? My OS is CentOS 4.5 with Linux 2.6.9-55.0.2.plus.c4smp #1 SMP Fri Jul 6 05:25:07 EDT 2007 i686 i686 i386 GNU/Linux Is there any detail step by step procedure to uninstall the current version and install Asterisk 1.4.8, Zaptel 1.4.4, Libpri 1.4.1, Addons 1.4.2? Cheers, Nitesh

...lug: # cat /etc/zaptel.conf fxsks=1 loadzone=fr defaultzone=fr # ztcfg -vv Zaptel Version: 1.4.5.1 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. # lsmod | grep zap zaptel 189860 7 zttranscode,ztdummy,wctdm crc_ccitt 3072 2 zaptel,hisax # cat /etc/asterisk/zapata.conf [channels] context=my-phones usecallerid=yes hidecallerid=no immediate=no signalling=fxs_ks echocancel=yes channel => 1 ubuntu*CLI> reload chan_zap.so -- Reloading module 'chan_zap.so' (...

I installed zaptel 1.2.17 and shortly afterwards got a problem of calls not clearing properly. I ran dmesg which showed Unable to handle kernel NULL pointer dereference at virtual address 0000009c printing eip: f8a79fa8 *pde = 00000000 Oops: 0000 [#1] Modules linked in: zttranscode button battery ac ipv6 edd wcte11xp zaptel crc_ccitt i2c_i801 i2c_core tg3 generic shpchp pci_hotplug parport_pc lp parport dm_mod ext3 jbd sg fan thermal processor 3w_xxxx piix sd_mod scsi_mod ide_disk ide_core CPU: 0 EIP: 0060:[<f8a79fa8>] Tainted: G U VLI EFLAGS: 00010082...

hi guys: recently I want to buinding a meeting confence on asterisk and use the meetme application. I have a ztdummy kernel afteri the lsmod commond: ztdummy 5768 0 zaptel 182660 28 zttranscode,ztdummy crc_ccitt 3008 1 zaptel I also configure the meetme.conf conf => 1000; my extensions.conf [default] exten => 4110,1,Answer() ;exten => 99008664110,n,MeetMeCount(1000) exten => 4110,n,MeetMe(1000) exten => 4110,n,Hangup() but after i...

...9;t make Zap/1-1 compatible with IAX2/VoIPRakyat-2 I just upgraded to SVN-branch-1.4-r49020M, but doesn't help. I am using TDM400P with one FXO and one FXS. Initially I just compiled and loaded zaptel and wctdm modules. Then I tried to compile and load ztd-eth, ztd-loc, ztdummy, ztdynamic and zttranscode modules as well just to make sure, but that does not help either. I have no issue at all using any other codecs on IAX. There are some threads on this mailing list for similar issue, but mostly pointed out to G729 license. I have one as below: [Dec 28 21:02:52] VERBOSE[1440] logger.c: == G.729...