search for: yongari

With FreeBSD 6.3-RELEASE, I'm finding significant packet loss (sometimes 85%). If I insert an Intel nic (fxp), there is nil packet loss with similar tests (ping -c 100). re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xf9fff000-0xf9ffffff irq 17 at device 0.0 on pci1 I have seen a thread on current mentioning similar problems:

Hi, I'm having lots of difficulties with BCM5719, which is the default network card of HP Proliant DL 360 G8 servers. I can get a few ping replies before I get a couple of these: bge0: watchdog timeout -- resetting bge0: watchdog timeout -- resetting Then everything hangs. Can not log in using ssh.

I'm running 7.0-RELEASE-i386 on Jetway's NC92-N230 mainboard. The board has one integrated RTL8168/8111 gigabit NIC as well as an expansion board with three RTL8168/8111 NICs. Why would the three NICs work while the onboard NIC does not? none2@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device

Any news about that? http://lists.freebsd.org/pipermail/freebsd-stable/2009-January/047527.html

...base Description, length: 1472 > > > > Let me know if you need more detailed tcpdump output than I've provided. > > > > I guess I've found a VLAN hardware tagging bug in re(4). > Please try this one and let me know the result. > http://people.freebsd.org/~yongari/re/if_re.c > http://people.freebsd.org/~yongari/re/if_rlreg.h > > > Ian > > > > -- > > Ian Freislich > > > > -- > Regards, > Pyun YongHyeon Pyun, I used it, and I got no bufer space available message, I run a server with heavey http reque...

Hi I installed the following driver. http://www.f.csce.kyushu-u.ac.jp/~shigeaki//software/freebsd-nfe.html Before I had the nve driver which was unstable on this server and on a prior server in both cases causing either spontaneous reboot or just a crash when under load. So far touchwood the nfe driver has stayed up and running at almost 3 days uptime and has had some stress. I know the driver

...========================================================= FreeBSD-EN-09:03.fxp Errata Notice The FreeBSD Project Topic: Poor TCP performance of fxp(4) Category: core Module: sys/dev Announced: 2009-06-24 Credits: Bjoern Koenig <bkoenig@alpha-tierchen.de> Pyun YongHyeon <yongari@FreeBSD.org> Affects: FreeBSD 7.2 Corrected: 2009-05-07 01:14:59 (RELENG_7, 7.2-STABLE) 2009-06-24 05:28:09 (RELENG_7_2, 7.2-RELEASE-p3) For general information regarding FreeBSD Errata Notices and Security Advisories, including descriptions of the fields above, security branches, and the fol...

...stalls after a few kilobytes. This concerns FTP and SCP likewise. While trying to find a reason for this problem I did a binary search on the source tree using a generic kernel configuration and found out that the following commit is responsible for this: SVN rev 188374 on 2009-02-09 03:48:49Z by yongari MFC r185330: Implement TSO for 82550/82551 controllers. o Configure controller to use dynamic TBD as TSO requires that operation mode. o Add a dummy TBD to tx_cb_u as TSO can access one more TBD in TSO operation. o Increase a DMA segment size to 4096 to hold a full IP segment...

Hi, I upgraded my 7.1-RELEASE system to RELENG_7 yesterday and after booting, re0 works for only a short time, then gives "re0: PHY read failed" over and over. Does anyone have a suggestion on how to debug? Thanks, Steve

Team I have a Dell PowerEdge R720xd, with the Broadcom NetXtreme bcm5720. I found the following thread: http://forums.freebsd.org/showthread.php?t=31769 I find I am unable to use the NIC's (there are 4 on the server). When we put a cable into it we get a "watchdog timeout -- resetting" error, and the machine will pause for 5 or so seconds. IP may or may not come up randomly.

Hello, Since FreeBSD 9.1 I have strange problems with the distribution. Some servers are rebooting without any kernel panic, instanly. First i thought it's a problem with my KVM system, but one of my FreeBSD under a Dell R210 have the same problem. The servers concerned are now: - Monitoring server - LDAP test server - Some other servers, randomly (not in production). First i thought it's

Hello list I have a shutdown problem. I have a machine with gigabyte GA-G33M-DS2R motherboard. Integrated network card is Realtek 8111B. I can not wake the computer after I shutdown it from FreeBSD. It is a dualboot system - windows xp and freebsd. If I shutdown the computer from windows - later I can wake it up with magic packet. Even if i shutdown the machine on the boot menu with the power

...t 3500 km). I'm asking you some advices, and i can i fix this problem. p.s. with both 5.4 or 5.5 old kernel, the nics was fine. Regards Xer ----------kernel config ----------- xer:/root# cat /usr/src/sys/i386/conf/ASUS # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.18 2008/07/28 02:20:29 yongari Exp $ # # custom kernel ASUS 01.15.2009 machine i386 cpu I686_CPU ident ASUS options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking o...

...________________________________________________________________ Porting OpenBSD's pf URL: http://pf4freebsd.love2party.net URL: http://www.benzedrine.cx/pf.html URL: http://openbsd.org/faq/pf/index.html Contact: Max Laier <max@love2party.net> Contact: Pyun YongHyeon <yongari@kt-is.co.kr> The project started this spring and released version 1.0 with a port installation (security/pf) in may 2003. Version 2.0 is on the doorstep as OpenBSD 3.4 will be released. Due to the porting efforts we were able to reveal some bugs in the OpenBSD code and provided lock...

Good morning, I'm having a bit of an issue getting a 3CR990B-TXM NIC detected and usable. Just wondering if anyone knows of any issues with this NIC chipset and/or with the motherboard chipset. The motherboard is a Biostar GeForce 6100 AM2 using an nVidia nForce 410 chipset and nVidia GeForce 6100 vide chipset. I've tried FreeBSD 6.1, 6.2, 6-STABLE (from Wed), and 7-CURRENT (from