search for: xseri

Does anyone recommend any particular SAS controller, or should I use an Ultra-320 SCSI controller instead? My machine is an IBM xSeries 306m. It has a SAS controller provided on a daughter card, but it''s not supported in the 2.6.16 kernel, so I''m looking for a separate disk controller card that will work with my existing SAS disks. -- James Holmes Programmer/SysAdmin RTDS Technologies Inc. -- http://www.rtds.c...

ok now i bought an IBM xSeries 206 but my problem is the hard drive can't be detected. I tried surfing for drivers for SATA and i found one for RHEL 3 can this driver works for CentOS 4.2? -- Regards, Mark Quitoriano, CCNA Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441 -------------- next par...

Hi, I have an IBM xSeries server... and the digium card is sharing IRQ with USB and giving me crackling audio. >>> cat /proc/interrupts >>> >>> It brings up these results: >>> 0: 10566547 IO-APIC-edge timer >>> 1: 9 IO-APIC-edge i8042 >>> 2...

Hi , I have setup xen on a number of different machines already; however, I couldn''t get xSeries 330 working with Xen. When it boots up, it says "Waiting for device /dev/sda1 .... device not found" and then return a shell prompt. I have looked up this error on the mailing list. I found that the error is potentially caused SCSI driver and it can be resolved this problem by custo...

Dear all, I'll install Asterisk 1.4 in an IBM xSeries 226 server with four HD's available, using CentOS as the OS. What's the best RAID type recommendation ??? RAID 1 or RAID 5 ??? Regards Alejandro

Hi. We look to switch from XenServer, as it latest versions do not run on our eserver xSeries 336 server. Does the XCP 1.1 fully support this hardware? Also, any idea how well the Xen tools, such as XenCenter and Xen HW->VM tools supported in 1.1 release? I seen there is a feature called XAPI that makes the XCP look as fully-featured XenServer. Thanks. ____________________________...

Hi CentOS users I have here old CentOS 2.1 server on IBM Xseries 336. How to see serial number and machine type? It seems that "dmidecode" is not available for CentOS 2.1 cheers Simon -- XMPP: sjolle at swissjabber.org

Hi All, I recently got some IBM Xseries 335 servers 2nd hand, and noticed they don't have any graphics card. Some google searched indicate they only have an uplink port, which you could connect to another (other model) IBM server and use that as the head node. But, I don't have one available. It has 2x GB NIC's, and what l...

Hi There, Can someone have a look at the specs of this server, found here: http://www-8.ibm.com/servers/eserver/nz/xseries/x366/specs.html and let me know if this is a VT-enabled server? The outline lists this server as having: Intel Xeon Processor MP up to 3.66GHz (single-core) and 3.00GHz (dual-core)/667MHz front-side bus, both support Intel Extended Memory 64 Technology. Thanks Simon __________________________...

Hi, Is it possible to disable the clear screen when loading syslinux ? Since the IBM BIOS on xSeries systems shows the MAC address of the onboard NICs, I would like to have them on screen when people do a kickstart fro mthe prompt using eg: ksdevice=<MAC address> I personally think that the clear screen is unwanted in most cases since people can add that to the boot message (ctrl-L) if...

...normally using Xen kernel: either network communication is not functioning at all despite proper configuration (that works on non-Xen kernel), or the kernel can''t communicate with disks, issuing SCSI bus reset commands in loop (and failing to reset it). Hardware is mainly made by IBM (xSeries with older Xeon or Opteron CPUs). While booting Xen kernels on SLES they have following symptoms: - various FATAL errors while loading modules, like missing xen_vbd or missing xen_vnif - when booting non-xen kernel, messages in dmesg like: xen_vnif: Unknown symbol balloon_update_driver_allow...

Hi, I got few servers (IBM HS20,HS21 blades, IBM xSeries 3650 & others) connected to a dual fabric san throught Qlogic HBA's (23xx, 24xx). Multipathing is done with device-mapper-multipath. On CentOS 4.x i can scan for new scsi devices without any problems, get them up with multipathing & use them without any problems. However, after i...

Hello: I have an odd problem with an IBM EServer XSeries 305 (aka x305). Sometimes it seems to just sit there, completely unresponsive to the command line (ssh and console), for several seconds. Other times it works normally. top will sometimes die with a floating point error while waiting for it to start. When top does work, it often shows a syste...

I have a IBM XSeries 366 with 04 processors Intel Xeon 3.16 Ghz, 16 Gb of memory and a storage IBM with 2 terabytes. I work with virtualization and my OS in this machine is a VMware ESX 2.5.3 version. When I install CentOS 4.X as guest operating system under ESX, the performance is very very bad. When I intsall...

I'm trying to install CentOS 4.2 on an old IBM x300 server, but it hangs during the boot from cd. The last entries I can see before it dies are the two "agpgart" lines. I've been playing around with bios settings (video settings and serial settings since the serial driver is the next thing going on in the kernel) and boot params (noapic, acpi=off etc) but I just can't

Hi all, I have installed a TDM22B on an IBM xSeries 220 with FedoraCore 3 and setup asterisk cvs head to work properly. A few days ago, I tried to update the system kernel to 2.6.12 from 2.6.9 and also to change to asterisk stable 1.0.9. After compiling zaptel and asterisk, i loaded zaptel and tried to load the wctdm module but this failed with t...

Hi, I would like to know what type of configuration could get me closer to 100% hits in zttest, when testing a TDM400P with 4 FXO ports, I am currently running kernel 2.4.31, on a IBM Xseries 306, with 3gh CPU, HT is disabled, PCI latency was changed, i still cant get more then 99.975% in the zttest testings, Thanks for any info. Marco.

Does anyone on list have experience with Digium hardware in the following servers: Dell poweredge SC440 IBM xSeries x226 Have just had major hassles getting TE205P ISDN cards going in these boxes. No joy so far. Anyone managed to do it yet? Thanks. Mark

I'm having trouble with IBM xseries 345/dual Xeon 2.66GHz showing only one processor. At boot I see "SMP motherboard not recognized". Using title CentOS (2.6.18-8.1.8.el5xen) root (hd0,0) kernel /xen.gz-2.6.18-8.1.8.el5 module /vmlinuz-2.6.18-8.1.8.el5xen ro root=/dev/VolGroup00/LogVol00 rhgb...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, I have an IBM xseries 345, running CentOS 5.3, hosting a few Xen domUs. However, I need more RAM -- but cannot remember if all (four) RAM sockets are populated (which would mean to buy higher capacity modules) or if there are two slots left to use. However, I'd like (and think that it's possible, but don'...