search for: xennet

...tree for files to compile. c:\win-pvdrivers c:\win-pvdrivers\liblfds.6 c:\win-pvdrivers\liblfds.6\src c:\win-pvdrivers\liblfds.6\src\single_dir_for_windows_kernel c:\win-pvdrivers\xenpci c:\win-pvdrivers\xenvbd_scsiport c:\win-pvdrivers\xenvbd_filter c:\win-pvdrivers\xennet c:\win-pvdrivers\copyconfig c:\win-pvdrivers\shutdownmon c:\win-pvdrivers\waitnopendinginstallevents BUILD: Building generated files in c:\win-pvdrivers\xenpci directory _NT_TARGET_VERSION SET TO WINXP BUILD: Building generated files in c:\win-pvdrivers\xenvbd_scsiport directory _NT_TAR...

...dom0 has almost identical setup, thou on different hardware. When I start copying large file (over 300MB) through network, the server from which I initiate copy stops responding to network (Remote Desktop hangs), and /var/log/xen/qemu-dm-mymachine.log gets filled with these lines (lots of them): XenNet Full on send - required = 3, available = 0 XenNet Full on send - required = 3, available = 0 XenNet Full on send - required = 3, available = 0 XenNet Full on send - required = 3, available = 1 XenNet Full on send - required = 3, available = 1 XenNet Full on send - required =...

Hi all, when I try to build an initial ramdisk with the option --with=xennet, I get the following error No module xennet found for kernel 2.6.18.8-xen I looked at the /lib/modules/2.6.18.8-xen/kernel/drivers/xen and there is no xennet module over there, which causes the problem. How can I get the xennet module? Thanks, Luca _______________________________________...

Hi Ian, Today i fired up an old VM with a bittorrent client, trying to download some torrents. I seem to be hitting the unlikely case of "xennet: skb rides the rocket: xx slots" and this results in some dropped packets in domU, I don''t see any warnings in dom0. I have added some extra info, but i don''t have enough knowledge if this could/should be prevented from happening ? [16798.629141] xennet: skb rides the rocke...

Hello, I installed the signed drivers from http://wiki.univention.de/index.php?title=Installing-signed-GPLPV-drivers and I ran into a BSOD on a Windows 2008 Server R2 Enterprise domU with a large number of vcpu''s. The BSOD is related to xennet.sys. After some trials I found that it runs fine up to 15 cores. From 16 or more, the BSOD kicks in when booting the domU. The hardware (4 times X7550) runs Xen version 4.1.2_05-1.1.1 (abuild@) (gcc version 4.6.2 (SUSE Linux) (openSUSE 12.1) ). Dom0: 3.1.9-1.4-xen x86_64 DomU: Windows 2008 Serve...

Hi there. I have been dealing with a conundrum off and on with a VPS of mine. Windows 2003 Standard 32 bit on a Xen HVM instance. Been trying to get the GPLPV drivers working to help boost performance but always seem to run into one major issue: The PV network device looks like it works but actual connectivity is non-existant. Everything else in the GPLPV driver suite works fine. What I want to

...nning through much of its early setup. Eventually, however, it quits on "waiting for device" - that is to say, when it needs to find its drive partition and root. I have spent several person-days on this and believe my problem is that I have no xenblk. Indeed, I note that I do not have xennet, either, on my brand new, newly setup machine. I looked everywhere for these files, re-installed far too many times, looked all over the net and have even downloaded a tar version from the Xen.org site and tried that too - still no xenblk or xennet. I believe that for my install they ought to r...

...+182,8 @@ let detect_kernels (g : G.guestfs) inspect family bootloader = List.mem what modules || check_config kconf config_file in let supports_virtio = kernel_supports "virtio_net" "VIRTIO_NET" in - let is_xen_kernel = List.mem "xennet" modules in + let is_xen_kernel = + kernel_supports "xennet" "XEN_NETDEV_FRONTEND" in (* If the package name is like "kernel-debug", then it's * a debug kernel. -- 2.12.0

...blem? Here is the output from initrd: ---- CUT HERE ---- [19:12:01]/lib/modules# depmod -a 2.6.16.29-xen [19:12:07]/lib/modules# mkinitrd -k vmlinuz-2.6.16.29-xen -i initrd-2.6.16.29-xen Root device: /dev/sda4 (mounted on / as ext3) Module list: ata_piix processor thermal fan jbd ext3 edd (xennet xenblk) Kernel image: /boot/vmlinuz-2.6.16.29-xen Initrd image: /boot/initrd-2.6.16.29-xen Shared libs: lib/ld-2.4.so lib/libacl.so.1.1.0 lib/libattr.so.1.1.0 lib/libblkid.so.1.0 lib/libc-2.4.so lib/libcom_err.so.2.1 lib/libdl-2.4.solib/libext2fs.so.2.4 lib/libhistory.so.5.1 lib/libncurses....

I have installed the 210 gplpv (debug), when I try to update them with current gplpv I get a BSOD even so when I try to uninstall them. Now I have made a bootentry that specifies NOGPLPV, what gives me a bootable system after such a crash, I found (uninstalling the leftover driver packages after getting bsod during uninstall of the main package) that uninstalling the net driver leads to bsod. Now

...= "dhcp" disk = [''file:/root/fedora/fedora1.fc5.img,sda1,w'', ''file:/root/fedora/fedora1.swap,sda2,w''] root = "/dev/sda1 ro" extra = "4" vif = [ ''bridge=xenbr0'' ] #nics = 1 i''ve also tried to set alias eth0 xennet in /etc/modprobe.conf in DomU but to no avail. I downloaded the fedora1.fc5.img from jailtime.org. I tried the same in FC4 and it worked like a charm. Maybe I''m missing something? - can someone help, Thx in advance! -- _______________________________________________ Xen-users mailing li...

I''m going to set up a PVM on xen-3.3.1 debian-amd64. I need advices about the best methods to install a fresh debian on it (i.e. how to choose the kernel for pvm) . I''ve installed xen from sources and only have one xen kernel in /boot which I''m using for dom0; should I use the same kernel for domUs? There is any problem on use vcpus=2; the other vm is an hvm running

...I am as green as grass and trying to install Xen 3.1.0 on to a brand new machine running SuSE 10.3. I am at the point where Xen starts to boot and quits on a "Waiting for device......./dev/sda5" message. I believe that this may be related to the fact that xennet and xenblk are missing, as far as I can tell, from my machine. Mkinitrd complains that it can''t find them and I can''t either! Worse, I can''t find anything on the internet to suggest where I should get them, or where these modules come from! If someone could point m...

I have some real problems with the xennet, when disable and try to enable the nic I get a BSoD due to ndis.sys Further more the system still fails to get an IP using dhcp. The box is after a lot of cleanup, now on the 217 GPLPV. I could provide additional details on demand next week. (I''m unsure to get the machine earlier in my...

Running GPL PV Windows drivers on Windows 2003 Server Standard Edition SP2 - The current GPL PV Windows xennet driver source found in the repository will BSOD if the option "Large Send Offload" is changed to disabled or if the driver is disabled. Tracked down the issue via WinDbg – If a buffer is in the free list prior to the function XenNet_RxBufferFree() being called via the function XenNet_Rx...

Running GPL PV Windows drivers on Windows 2003 Server Standard Edition SP2 - The current GPL PV Windows xennet driver source found in the repository will BSOD if the option "Large Send Offload" is changed to disabled or if the driver is disabled. Tracked down the issue via WinDbg – If a buffer is in the free list prior to the function XenNet_RxBufferFree() being called via the function XenNet_RxSh...

...potential licensing problems with the Microsoft WDF and to (hopefully) allow them to function as boot drivers when doing install and system recovery. It was a fairly major rewrite of xenpci, and xenvbd, which are now working (booting and running without crashes so far). I haven''t touched xennet yet so it''s broken atm, although it won''t be too hard to get it working. Also I have taken a different approach with xenhide and it should be a lot more robust than before (eg shouldn''t get duplicate disks with the resulting corruption). The graceful shutdown stuff in x...

...potential licensing problems with the Microsoft WDF and to (hopefully) allow them to function as boot drivers when doing install and system recovery. It was a fairly major rewrite of xenpci, and xenvbd, which are now working (booting and running without crashes so far). I haven''t touched xennet yet so it''s broken atm, although it won''t be too hard to get it working. Also I have taken a different approach with xenhide and it should be a lot more robust than before (eg shouldn''t get duplicate disks with the resulting corruption). The graceful shutdown stuff in x...

...disk installed" prompt however) as soon as I do any network stuff (web browsing, windows update, etc) it BSODs with DRIVER_IRQL_NOT_LESS_OR_EQUAL and restarts immediately, before being able to display anything. Many attempts later I just caught the driver that "caused" the crash, xennet.sys. Which kinda makes sense, seeing as it''s using the network that crashes it. Boot NOGPLPV and it''s perfectly fine. I''ve done this now on two different installs, the second was completely updated, including SP2, taking several trips through windows updates, before gp...

...a copy of /etc/xen/hotplugpath.sh and should be put in /etc/xen/. udev/xen-backend.rules is a modified version of the file supplied by Xen. Line 6-9 take care of creation and deletion of networking interfaces. As you can see, upon creation/deletion of a network interface, the file /etc/xen/scripts/xennet is called. This file can be found on github in the scripts directory. Xennet is a replacement of vif-bridge. In the old scenario, udev calls vif-setup, vif-setup calls vif-bridge, vif-bridge calls vif-common and numerous other scripts. With xennet, I wanted to have one script to take care of the n...