search for: xenbr5

...idge" "$@" vifnum=2 netdev=eth2 bridge=xenbr2 "$dir/network-bridge" "$@" vifnum=3 netdev=eth3 bridge=xenbr3 "$dir/network-bridge" "$@" vifnum=4 netdev=eth4 bridge=xenbr4 "$dir/network-bridge" "$@" vifnum=5 netdev=eth5 bridge=xenbr5 When i done brct show i have this : bridge name bridge id STP enabled interfaces bridge name bridge id STP enabled interfaces xenbr0 8000.feffffffffff no vif0.0...

Hello, can anybody help me how to configure vlans? There are vlans: vlan2 vlan3 vlan30 Server has one nic - eth0. vlan2 should be dom0 eth0(peth0) for management Each vlan3 and vlan30 should be has its own bridge. How to make it? Br Peter _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

...#39;0' >> unit='0'/> >>      </disk> >>      <controller type='ide' index='0'/> >>      <interface type='bridge'> >>        <mac address='00:16:3e:8c:97:27'/> >>        <source bridge='xenbr5'/> >>        <model type='e1000'/> >>      </interface> >>      <serial type='pty'> >>        <target port='0'/> >>      </serial> >>      <console type='pty'> >>        <target t...

...idge" "$@" vifnum=2 netdev=eth2 bridge=xenbr2 "$dir/network-bridge" "$@" vifnum=3 netdev=eth3 bridge=xenbr3 "$dir/network-bridge" "$@" vifnum=4 netdev=eth4 bridge=xenbr4 "$dir/network-bridge" "$@" vifnum=5 netdev=eth5 bridge=xenbr5 "$dir/network-bridge" "$@" vifnum=6 netdev=eth6 bridge=xenbr6 I also changed the configurations of the virtual RHEL4s (didn''t feel like typing out the MACS, as my linux box doesn''t have an internet connection) Slave1: vif=[ ''type=ioemu, mac= X...

...dz' bus='xen'/> <readonly/> </disk> <controller type='xenbus' index='0' maxGrantFrames='128'/> <interface type='bridge'> <mac address='00:16:3e:05:31:50'/> <source bridge='xenbr5'/> <script path='vif-bridge'/> </interface> <interface type='bridge'> <mac address='00:16:3e:15:31:50'/> <source bridge='xenbr15'/> <script path='vif-bridge'/> </interfac...

...ype = "hvm" vcpus = 2 rtc_timeoffset = 0 localtime = 1 on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" vnc = 1 vncunused = 0 vncdisplay = 100 vnclisten = "0.0.0.0" keymap = "de" vif = [ "mac=00:16:3e:05:30:04,bridge=xenbr5,script=vif-bridge,model=e1000", "mac=00:16:3e:04:30:04,bridge=xenbr4,script=vif-bridge,model=e1000", "mac=00:16:3e:15:30:04,bridge=xenbr15,script=vif-bridge,model=e1000", "mac=00:16:3e:14:30:04,bridge=xenbr14,script=vif-bridge,model=e1000" ] parallel = "none&...

I have the following networking setup: - eth0 and eth1 corresponding to the physical ports on the host NIC - bond0 which enslaves eth0 + eth1 - br0 which attaches bond0 - xenbr0 - xenbr5 all of which are internal only networks (10.0.0.0; 10.1.1.0; etc) Br0 is used both for the host to access the outside world as well as DomUs acting as gateway machines for each xenbr network. For example the DomU named Gateway0 will have eth0 attached to br0 giving it connectivity to the Internet...

...br8 > [2008-09-09 15:34:42 3755] INFO (__init__:1072) Not recreating missing unmanaged network xenbr9 > [2008-09-09 15:34:42 3755] INFO (__init__:1072) Not recreating missing unmanaged network xenbr3 > [2008-09-09 15:34:42 3755] INFO (__init__:1072) Not recreating missing unmanaged network xenbr5 > [2008-09-09 15:34:42 3755] INFO (__init__:1072) Not recreating missing unmanaged network xenbr2 > [2008-09-09 15:34:42 3755] INFO (__init__:1072) Not recreating missing unmanaged network xenbr6 > [2008-09-09 15:34:42 3755] INFO (__init__:1072) Not recreating missing unmanaged network tmp...

...pe='raw'/> <source dev='/dev/vg_lilith/lv_abaddon_swap'/> <target dev='xvdb' bus='xen'/> </disk> <interface type='bridge'> <mac address='00:16:3e:05:31:30'/> <source bridge='xenbr5'/> <script path='vif-bridge'/> </interface> <console type='pty'> <target type='xen' port='0'/> </console> <input type='mouse' bus='xen'/> <input type='keyboard...

...b7-3937-417d-8d63-b0993b377b6a" maxmem = 16384 memory = 16384 kernel = '/usr/lib64/xen/boot/hvmloader' vcpus = 16 rtc_timeoffset = 0 localtime = 1 on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" vif = [ "mac=00:16:3e:05:01:10,bridge=xenbr5,script=vif-bridge,model=e1000" ] parallel = "none" serial = "none" type = "hvm" loader = "/usr/lib64/xen/boot/hvmloader" disk = [ "phy:/dev/mapper/marax_c,hda,rw", "phy:/dev/vg_lilith/lv_marax_d,hdb,rw" ] max_grant_frames = "128&...

...unit='1'/> </disk> <controller type='xenbus' index='0'/> <controller type='ide' index='0'/> <interface type='bridge'> <mac address='00:16:3e:05:30:04'/> <source bridge='xenbr5'/> <script path='vif-bridge'/> <model type='netfront'/> </interface> <interface type='bridge'> <mac address='00:16:3e:04:30:04'/> <source bridge='xenbr4'/> <script path...

...f qemu crash with > gdb depending on the error of qemu crash. > thats the config of domU: builder = 'hvm' memory = 2048 vcpus=8 boot="c" name = "marax" disk = [ 'phy:/dev/vg_lilith/lv_marax_c,hda,w' ] vif = [ 'bridge=xenbr5,mac=00:16:3e:05:01:10,script=vif-bridge' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' vnc=0 vga = 'stdvga' spice = 1 spicehost = '0.0.0.0' spiceport = 6000 spicedisable_ticketing=1...

...value kernel was missing cat /etc/xen/marax.cfg builder = 'hvm' memory = 2048 vcpus=8 boot="c" name = "marax" disk = [ 'phy:/dev/vg_lilith/lv_marax_c,hda,w', 'phy:/dev/vg_lilith/lv_marax_d,hdb,w' ] vif = [ 'bridge=xenbr5,mac=00:16:3e:05:01:10,script=vif-bridge,model=e1000' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' vnc=0 vga = 'stdvga' spice = 1 spicehost = '0.0.0.0' spiceport = 6000 spicedisable...

...ve' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='ide' index='0'/> <interface type='bridge'> <mac address='00:16:3e:05:01:10'/> <source bridge='xenbr5'/> <script path='vif-bridge'/> <model type='e1000'/> </interface> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='spice' port='600...

...ype = "hvm" vcpus = 2 rtc_timeoffset = 0 localtime = 1 on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" vnc = 1 vncunused = 0 vncdisplay = 100 vnclisten = "0.0.0.0" keymap = "de" vif = [ "mac=00:16:3e:05:30:04,bridge=xenbr5,script=vif-bridge,model=e1000", "mac=00:16:3e:04:30:04,bridge=xenbr4,script=vif-bridge,model=e1000", "mac=00:16:3e:15:30:04,bridge=xenbr15,script=vif-bridge,model=e1000", "mac=00:16:3e:14:30:04,bridge=xenbr14,script=vif-bridge,model=e1000" ] parallel = "none&...

...localtime = 1 > on_poweroff = "destroy" > on_reboot = "restart" > on_crash = "restart" > vnc = 1 > vncunused = 0 > vncdisplay = 100 > vnclisten = "0.0.0.0" > keymap = "de" > vif = [ > "mac=00:16:3e:05:30:04,bridge=xenbr5,script=vif-bridge,model=e1000", > "mac=00:16:3e:04:30:04,bridge=xenbr4,script=vif-bridge,model=e1000", > "mac=00:16:3e:15:30:04,bridge=xenbr15,script=vif-bridge,model=e1000", > "mac=00:16:3e:14:30:04,bridge=xenbr14,script=vif-bridge,model=e1000" ] > pa...

...ot exist") which already seemed strange to me (why 5, it should use 0?). I had to increase the number of loopback devices to make it work. But is still strange. Is there something I can do about this? I would like things to behave as expected. There has to be some reason why XEN uses xenbr5 instead of xenbr0? I tried to find a config file where I can specify the bridge to create, but I can''t find it. Best regards Sam _________________________________________________________________ Invite your mail contacts to join your friends list with Windows Live Spaces. It&...

...;/> > <readonly/> > </disk> > <controller type='xenbus' index='0' maxGrantFrames='128'/> > <interface type='bridge'> > <mac address='00:16:3e:05:31:50'/> > <source bridge='xenbr5'/> > <script path='vif-bridge'/> > </interface> > <interface type='bridge'> > <mac address='00:16:3e:15:31:50'/> > <source bridge='xenbr15'/> > <script path='vif-bridge'...

...ve' controller='0' bus='1' target='0' unit='0'/> </disk> <controller type='ide' index='0'/> <interface type='bridge'> <mac address='00:16:3e:8c:97:27'/> <source bridge='xenbr5'/> <model type='e1000'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console&gt...

...oft.nnet" # Kernel command line options extra = "root=/dev/xvda1 swiotlb=force" # Initial memory allocation (MB) memory = 2048 # Number of VCPUS vcpus = 2 # two ethernet devices, one for the network, one for the Eumetcast receiver vif = ['mac=00:16:3E:00:00:35, bridge=xenbr5', 'mac=00:16:3E:00:00:36, bridge=xenbr6'] # Disk Devices disk = ['phy:/dev/xen_vg/metsat_disk,xvda,w', 'phy:/dev/xen_vg/metsat_swap,xvdb,w', 'phy:/dev/xen_vg/metsat_receive,xvdc,w'] # for Eumetcast Dongle pci=['00:1a.0,rdm_policy=relaxed,permissive=1...