search for: x4170

Hey guys and gals, Anyone have any experience with getting lm-sensors to run on Sun hardware? In particular Sunfire x2250 and x4170 I was running 5.3 on these boxes and sensors-detect would not find anything. I did a bit of research and as I recall thanks to this list discovered some bugs that were affecting me, so upgraded to 5.7. CPU temp sensors were then detected, but no fan sensors. At least on the x2250. The x4170 sti...

Hi maintainer, I found below patch reverted part of erst header size check. This lead to mismatch with kernel upstream code and erst disabled on some machine like X4170 M3/X3-2. According to the ACPI spec 4.0 and 5.0, the Serialization Header Length should be the length of Serialization Header. After revert below patch, xen succeed with erst table init. So could this patch be reverted now to match acpi spec and kernel upstream? [root@zhenzhong2 xen-unstable.hg]#...

We have Sun STK RAID cards in our x4170 servers. These are battery backed with 256mb cache. What is the recommended ZFS configuration for these cards? Right now, I have created a one-to-one logical volume to disk mapping on the RAID card (one disk == one volume on RAID card). Then, I mirror them using ZFS. No hardware mirror. What I am...

hi all, after i upgraded a physical server (SUN FIRE X4170) from CentOS 6.8 to 7.2 i am not able to get the same iSCSI read performance. the server is connected to HP P2000 Storage via 2 x 1GbE Ethernet. CentOS 6.8 gives me full read performance on raw iSCSI devices /dev/sdxx at 115MB/s. CentOS 7.2 allows only 90-100MB/s, read performance varies and is n...

...it seems that one DomU get done before the next DomU can start. It seems as if once disk I/O has started between a DomU and the Storage, then the hypervisor will continue servicing that DomU until the DomU has a pause in the data requests, before the hypervistor switches to the next DomU. HW: Sun x4170 Xen: 3.4.3 Dom0: CentOS release 5.5 (Final) Linux c6 2.6.18-194.el5xen #1 SMP Fri Apr 2 15:34:40 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux DomU: Same as Dom0. 1) What could be the problem? 2) What could I possibly do to troubleshoot this? 3) Anything I can do to configure Xen differentl...

I just ran zpool scrub on an active pool on an x4170 running S10U7 with the latest patches and iostat immediately dropped to 0 for all the pool devices and all processes associated with that device where hard locked, e.g., kill -9 on a zpool status processes was ineffective. However, other zpool on the system, such as the root pool, continued to work...

...till > locks. > > Any ideas, suggestions how to fix or workaround this issue? The adapter is > suppose to be enterprise-class. We have three of these HBA''s, used as follows: X4150, J4400, Solaris-10U7-x86, mpt patch 141737-01 V245, J4200, Solaris-10U7, mpt patch 141736-05 X4170, J4400, Solaris-10U8-x86, mpt/kernel patch 141445-09 None of these systems are suffering the issues you describe. All of their SAS HBA''s are running the latest Sun-supported firmware I could find for these HBA''s, which is v1.26.03.00 (BIOS 6.24.00), in LSI firmware update 14.2.2...

...ql instance which if I point more load towards it it suddenly gets 100% in SYS as shown below. It can work fine for an hour but eventually it gets to a jump from 5-15% of CPU utilization to 100% in SYS as show in mpstat output below: # prtdiag | head System Configuration: SUN MICROSYSTEMS SUN FIRE X4170 SERVER BIOS Configuration: American Megatrends Inc. 07060215 06/19/2009 BMC Configuration: IPMI 1.5 (KCS: Keyboard Controller Style) ==== Processor Sockets ==================================== Version Location Tag -------------------------------- ---------------...

While I understand everything at Oracle is "top secret" these days. Does anyone have any insight into a next-gen X4500 / X4540? Does some other Oracle / Sun partner make a comparable system that is fully supported by Oracle / Sun? http://www.oracle.com/us/products/servers-storage/servers/previous-products/index.html What do X4500 / X4540 owners use if they''d like more