search for: wwid

All other patches from the sequence remain unchanged. Repost of patch 6 based on comments from Joey to follow. Mike

The following patches introduce support for multipath and cciss devices to the ovirt-node and node-image. Comments are appreciated. These patches assume that the 3 patches (2 node, 1 node-image) from Joey are all incorporated. Mike

findfs in F12 finds partitions on /dev/sdX devices instead of /dev/mapper/<wwid> devices. This sets an option that forces findfs to scan instead. Signed-off-by: Mike Burns <mburns at redhat.com> --- recipe/common-post.ks | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/recipe/common-post.ks b/recipe/common-post.ks index 9243751..0a2e180 1...

Hello, mtx and therefor amanda use generic device /dev/sg<x> for tape changer. These devices change on reboot. How to make them persistent? /dev/sch0 and /dev/sch1 seem to be persistent. /dev/tape/by-id/ shows links from WWID to generic device An UDEV rule could help? I have not found any example. -- Viele Gr??e Helmut Drodofsky Internet XS Service GmbH He?br?hlstra?e 15 70565 Stuttgart Gesch?ftsf?hrung Helmut Drodofsky HRB 21091 Stuttgart USt.ID: DE190582774 Fon: 0711 781941 0 <tel:+497117819410> Fax: 0711...

Greetings, I am trying to wrap my head around on this topic. Was wondering : Just as there is some scope for mapping ipv4 directly into IPV6 space, Is there a MAC ID or some kind of WWID has also been taken into consideration? Regards, Rajagopal

...nnected to SAN via single Fibre channel HBA (qlogic). I have several LUNS assigned to this (sdc, sdd). I added another single port HBA to this host. I can now see two world wide names. Now the confusion is which world wide name does sdc and sdd is/was using. scsi_id -g -u -s /block/sdc only gives wwid but I need the wwn for sdc and sdd. Thanks Paras.

dm-* devices are references to existing /dev/sd* and /dev/mapper/<wwid>. We should not depend on them and only present /dev/sd* and /dev/mapper/<wwid> to the user. Signed-off-by: Mike Burns <mburns at redhat.com> --- scripts/ovirt-config-storage | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/scripts/ovirt-config-storage...

...ines (mach2 and mach3), I get: "mount.ocfs2: Transport endpoint is not connected while mounting /dev/disk/by-name/commondisk-part1 on /zdisk/ocfs2". On mach1, mount shows "/dev/dm-4 on /zdisk/ocfs2 type ocfs2 (rw,_netdev,heartbeat=local)". [1] /etc/multipath.conf translates the WWID into /dev/disk/by-name/commondisk-part1 Following my /etc/ocfs2/cluster.conf: node: ip_port = 7777 ip_address = 141.65.128.114 number = 0 name = mach1 cluster = ocfs2 node: ip_port = 7777 ip_address = 141.65.128.113 number = 1...

...tx and therefor amanda use generic device /dev/sg<x> for tape >> changer. >> >> These devices change on reboot. >> >> How to make them persistent? >> >> /dev/sch0 and /dev/sch1 seem to be persistent. >> >> /dev/tape/by-id/ shows links from WWID to generic device >> >> An UDEV rule could help? I have not found any example. > I had a similar issue when I moved to Mint 18 with the tape device. > ?This works with kernel 4.10 and later. ?Copy?/lib/udev/rules.d/60- > persistent-storage-tape.rules to?/etc/udev/rules.d and ma...

...requeststatus_id | int(11) | NO | | | | | description | text | NO | | | | | actiontaken | text | YES | | NULL | | | admin_id | int(11) | NO | | | | | wwid | varchar(8) | NO | | | | | idsid | varchar(8) | NO | | | | | name | varchar(50) | NO | | | | | email | varchar(50) | NO | | | | | phon...

Quote everywhere that we reference wwid in o-c-storage, o-c-boot and ovirt-functions. Signed-off-by: Mike Burns <mburns at redhat.com> --- scripts/ovirt-config-boot | 6 +- scripts/ovirt-config-storage | 178 +++++++++++++++++++++--------------------- scripts/ovirt-functions | 38 +++++----- 3 files changed, 111 ins...

Hi, we have SunFire X4140 connected to Dell MD1220 SAS enclosure, single path, MPxIO disabled, via LSI SAS9200-8e HBA. Disks are visible with sas-addresses such as this in "zpool status" output: NAME STATE READ WRITE CKSUM cuve ONLINE 0 0 0 mirror-0 ONLINE 0 0 0

...the megaraid management software does support these chips in IR mode The on-board 2308-4i has a RAID-1 set connected, configured in the BIOS before installing the OS. From dmesg: ** scsi 0:1:0:0: Direct-Access LSI Logical Volume 3000 PQ: 0 ANSI: 6 scsi 0:1:0:0: RAID1: handle(0x0143), wwid(0x0dafbe8ecd4f4330), pd_count(2), type(SSP) scsi 0:1:0:0: qdepth(128), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1) ** So, one of these must be true: 1) The machine came from HP with the IR firmware, yet MegaCli64 does not work on the 2308-4i. For the record, it dies because /dev/...

...SUNG_MZ7LM480HMHQ-00005_S2UJNX0J102216 -> ../../dm-5 disks 2:0 + 3:0 are configured as multipath devices (and subsequently set up by device mapper), disks 0:0 + 1:0 are not. SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102216 and SAMSUNG_MZ7LM480HMHQ-00005_S2UJNX0J102214 are listed in /etc/multipath/wwids (and get re-listed after reboot when i manually remove them). why are two of the four local disks configured as multipath devices? As far as i understood documentation this shouldn't happen thx 4 help matthias

...wrote: > Hello, > > mtx and therefor amanda use generic device /dev/sg<x> for tape > changer. > > These devices change on reboot. > > How to make them persistent? > > /dev/sch0 and /dev/sch1 seem to be persistent. > > /dev/tape/by-id/ shows links from WWID to generic device > > An UDEV rule could help? I have not found any example. I had a similar issue when I moved to Mint 18 with the tape device. ?This works with kernel 4.10 and later. ?Copy?/lib/udev/rules.d/60- persistent-storage-tape.rules to?/etc/udev/rules.d and make a change as shown:...

...for tape > > > changer. > > > > > > These devices change on reboot. > > > > > > How to make them persistent? > > > > > > /dev/sch0 and /dev/sch1 seem to be persistent. > > > > > > /dev/tape/by-id/ shows links from WWID to generic device > > > > > > An UDEV rule could help? I have not found any example. > > I had a similar issue when I moved to Mint 18 with the tape device. > > ?This works with kernel 4.10 and later. ?Copy?/lib/udev/rules.d/60- > > persistent-storage-tape.rules...

...and why vorbis I spec dictates that "Ogg stream must be unmultiplexed". Ogg can include both audio and video, that means one Ogg stream can both have vorbis and theora multiplexed. How vorbis I spec say could not allowed? Thanks! Best Regards, Emily Gao Tel:86-21-38764688 ext:6392(WWID 0760) VIA-VEPD-APP-CODEC -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/ogg-dev/attachments/20070426/ca416a15/attachment.htm

...and why vorbis I spec dictates that "Ogg stream must be unmultiplexed". Ogg can include both audio and video, that means one Ogg stream can both have vorbis and theora multiplexed. How vorbis I spec say could not allowed? Thanks! Best Regards, Emily Gao Tel:86-21-38764688 ext:6392(WWID 0760) VIA-VEPD-APP-CODEC -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/ogg-dev/attachments/20070426/c83a75ec/attachment.html

Hi all, I have problem with my servers. I use two of HP Blade Servers and RHEL 4.6 installed on them, and have IBM DS4700 connected to them. In those servers are running RHCS (Red Hat Cluster Suite) with GFS for handling Oracle Database. Yesterday, I had missing one partition from the storage, suddenly. I called IBM and they suggested to use RDAC. The question is, Why should use IBM RDAC for

...domU. I'm using NPIV to connect my SAN disks to my domU, and, due to the way my SAN presents the LUNs, need to use multipath inside the domU. I've tried this on both SLES11 and CentOS6 with pretty much the same result. The root issue seems to be that no "disk identity" (SCSI ID/WWID/etc.) is passed through from dom0 to domU on the NPIV connection (or any other xenblk disk connection). The symptom is that scsi_id exits with an error (1) and so multipath, in its default configuration, won't create the maps for the multipath devices. So, I have a couple of ideas, wondering...