search for: winnut

On Fri, 7 Sep 2018, Ong, Kevin wrote: > Any comments here? I am not a WinNUT user, but in general NUT clients do not produce their own log files. If you want more detail, you have to set the debug options and then look in your system logs. Upsmon.conf MONITOR ups at pfsense 1 <username> <password> slave ... POWERDOWNFLAG /usr/local/ups/etc/ki...

...er" on the NAS, entered the other NAS and PC IP addresses to let them receive NUT messages in case of power failure and now, I need to install a NUT client on the PC. Problem: I can't find any kind of documentation neither official, not from users on blogs or videos. We can find some for WinNUT. This client has a GUI and looks easy to install and configure. But it's written on networkupstools.org that "WinNUT is a partial port of the client side..." and it's "currently being replaced by a full port to Windows, part of the official NUT distribution."... https://...

Hi, Another beginner question. I spend hours trying to find the solution for how to configure winnut properly but I' struggling to make it work. I want my QNAP NAS TS-231 to work as a master and send signal to the PC to shut it down during power outage. I configured QNAP properly (like this: http://geekbeat.tv/qnap-adding-external-devices-qnap), but I don't know what to do next. I work on...

Hi All! This time I'm using Nut 2.2.0, Debian etch and kernel v. 2.6.23.9. My hardware config is quite simple. There are 2 PCs connected to my PowerMust 600VA. One is mensioned above the other is a Windows PC using Winnut 2.0.0b. The Linux PC is connected to the UPS via a serial cable and acts as the server. The problem is that both upsmon and winnut disconnect regularly but in random moments. First I've been using kernel v. 2.6.22.1 and tried upgrading it to the version mensioned, but I've reached the same...

...an.net/pipermail/nut-upsuser/2013-May/008393.html https://alioth-lists.debian.net/pipermail/nut-upsuser/2015-April/009651.html https://alioth-lists.debian.net/pipermail/nut-upsuser/2016-September/010269.html https://alioth-lists.debian.net/pipermail/nut-upsuser/2016-December/010470.html Etc., etc. WinNUT also generated a lot of interest and many How-to... https://www.seriouslytrivial.com/2018/09/26/shutdown-windows-computer-and-synology-nas-using-winnut/ https://opengear.zendesk.com/hc/en-us/articles/216374543-UPS-monitoring-and-automated-safe-shutdown-using-WinNUT https://www.reddit.com/r/homelab/...

How do you setup the debug options in WinNUT? Correct, it sets the POWERDOWNFLAG when it receives an FSD but only if it acts as a NUT MASTER (since the UPS is connected locally to the NUT MASTER and can issue a killpower). This is the default value and I did not care to change it because it won't be use on my Windows machine anyway as it...

Hi Charles, Are there any logs generated by the WinNUT client? I'm trying to configure it for the first time and I cannot make it to work. Here are my settings: Nut.conf MODE=netclient Upsmon.conf MONITOR ups at pfsense 1 <username> <password> slave MINSUPPLIES 1 SHUTDOWNCMD "C:\\WINDOWS\\system32\\shutdown.exe -s -t 0" POLL...

I changed IP to NAS IP instead of my PC IP and also used NAS login and pass. Didn't work. When I wanted to launch WinNUT with new settings I got: "Fatal error: insufficient power configured!" (same as before) I got this log: Level INFO 10/26/2016 10:46:17 Detected OS as Windows NT Level NOTICE 10/26/2016 10:46:17 Network UPS Tools upsmon 2.0.0.4 Level INFO 10/26/2016 10:46:17 C...

Hello All links I can find for winnut are not responding.. Anyone got a working link or maybe can send the package to me privately? /Martin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20060410/717c77a2/attachment.html

...6-633-3600 ext. 33996 Mobile +63-917-511-0251 *: kevin.ong at ingrammicro.com<mailto:kevin.ong at ingrammicro.com> [Ingram_Micro_Logo_ Small_Image] From: Ong, Kevin Sent: Tuesday, September 4, 2018 3:33 PM To: nut-upsuser at alioth-lists.debian.net Cc: kevindd992002 at yahoo.com Subject: WinNUT Client Logs Hi Charles, Are there any logs generated by the WinNUT client? I'm trying to configure it for the first time and I cannot make it to work. Here are my settings: Nut.conf MODE=netclient Upsmon.conf MONITOR ups at pfsense 1 <username> <password> slave MINSUPPLIES 1 SHU...

...other > NAS and PC IP addresses to let them receive NUT messages in case of > power failure and now, I need to install a NUT client on the PC. > > Problem: I can't find any kind of documentation neither official, not > from users on blogs or videos. > > We can find some for WinNUT. This client has a GUI and looks easy to > install and configure. > But it's written on networkupstools.org that "WinNUT is a partial port > of the client side..." and it's "currently being replaced by a full > port to Windows, part of the official NUT distributio...

I am aware of 2 windows nut clients both interestingly called winnut. One (winnut 2.0.0b) is a service based client based on a port of the but client code (I think). The other is a GUI client based on (I think again) on knutclient . I have corresponded with both authors about a feature request - to allow the shut-down action to be (optionally) a windows hibern...

Thank You very much !!! Now I see how was entered the master password in the file : "-v "concat(' password = ',//system/password)" -n \" I will test the proposed solution. Two questions - Do I need separate users for each WinNUT client or they can use the same user for monitoring&shutdown client machines ? - This is maybe a newbie question, how can be set the winnut client app to make a visual warning for pc user (not just in log file) that UPS is on battery and has N minutes before shutdown ? As I see,...

...141575 ups.status: OL ups.timer.reboot: 0 ups.timer.shutdown: -1 ups.vendorid: 051d I've even extracted the contents of the attached zip file (from Synology's web site) into /usr/share/snmp/mibs/. Using the exact same configuration options, I can successfully connect from Windows XP using WinNUT 2.0.0.4. Any ideas? Thanks, Dan -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20151012/caaf4b80/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed......

Hi Ralf, > sorry for contacting You directly, but by now my eyes are bleeding from > searching the net for Clientside programs for NUT for my Macs (G4 - Sys9.x, > G5 - Sys 10.x) I found one answer about waking up in the FAQ but that's all. > > WinNUT runs fine on my XP box, connected to a SmarttUps and a Debian Linux > Server. I'm looking for something like Winnut for the macs - it doesnt make > too much sense when XP and Linux boxes go down, but not the Macs... > > I look forward to Your answer, best wishes from Lake Constan...

[please use reply-all to include the list - the headers are not mangled] On Oct 25, 2016, at 9:53 AM, Tomasz Przychodzie? wrote: > > Hi, > > Another beginner question. I spend hours trying to find the solution for how to configure winnut properly but I' struggling to make it work. I want my QNAP NAS TS-231 to work as a master and send signal to the PC to shut it down during power outage. I configured QNAP properly (like this: http://geekbeat.tv/qnap-adding-external-devices-qnap), but I don't know what to do next. > >...

...016 10:46:17 Detected OS as Windows NT > Level NOTICE 10/26/2016 10:46:17 Network UPS Tools upsmon 2.0.0.4 > Level INFO 10/26/2016 10:46:17 Config Load: MINSUPPLIES set to 1 > Level INFO 10/26/2016 10:46:17 Config Load: NOTIFYCMD set to "c:\Program Files\WinNUT\alertPopup.exe" > Level INFO 10/26/2016 10:46:17 Config Load: POLLFREQ set to 5 > Level INFO 10/26/2016 10:46:17 Config Load: POLLFREQALERT set to 5 > Level INFO 10/26/2016 10:46:17 Config Load: HOSTSYNC set to 15 > Level INFO 10/26/2016 10:46:1...

Hello Having the next problem, manually adding via WinSCP in the upsd.users file the user for remote monitoring, saving the file, WinNUT client connects after "upsd -c reload" in NAS4Free console, but if I restart the NAS4Free system, the slave user disappears from upsd.users and remains only the master user. NAS4Free is version 9.1.0.1 rev 724 and NUT is the version what is included. Any help ? Thanks Andras ----------...

...o real help. On Thu, Aug 22, 2013 at 2:19 AM, Charles Lepple <clepple at gmail.com> wrote: > On Aug 21, 2013, at 10:41 AM, Incze Andras wrote: > > > Having the next problem, manually adding via WinSCP in the upsd.users > file the user for remote monitoring, saving the file, WinNUT client > connects after "upsd -c reload" in NAS4Free console, but if I restart the > NAS4Free system, the slave user disappears from upsd.users and remains only > the master user. > > NAS4Free is version 9.1.0.1 rev 724 and NUT is the version what is > included. > &gt...

...OS as Windows NT > > Level NOTICE 10/26/2016 10:46:17 Network UPS Tools upsmon 2.0.0.4 > > Level INFO 10/26/2016 10:46:17 Config Load: MINSUPPLIES set to > 1 > > Level INFO 10/26/2016 10:46:17 Config Load: NOTIFYCMD set to > "c:\Program Files\WinNUT\alertPopup.exe" > > Level INFO 10/26/2016 10:46:17 Config Load: POLLFREQ set to 5 > > Level INFO 10/26/2016 10:46:17 Config Load: POLLFREQALERT set > to 5 > > Level INFO 10/26/2016 10:46:17 Config Load: HOSTSYNC set to 15 > > Level I...