search for: wcte11xp

I have a X100P and a TE110P in my Asterisk box. I can either get the X100P or the TE110P to work, but never both. Here's my zaptel.conf span=1,0,0,d4,ami e&m=1-24 fxsls=25 When I load wcte11xp and wcfxo, I will get this error. [root at asterix etc]# modprobe wcte11xp ZT_CHANCONFIG failed on channel 25: No such device or address (6) /lib/modules/2.4.20-8/misc/wcte11xp.o: post-install wcte11xp failed /lib/modules/2.4.20-8/misc/wcte11xp.o: insmod wcte11xp failed Anyway to get both cards...

...working, but never both. I have the TE100P connected to a channel bank, and X100P clones to lines from the phone company. This is my zaptel.conf span=1,1,0,d4,ami fxsks=1-24 loadzone=us fxols=25-27 loadzone=us I then do [root@asterix root]# modprobe zaptel [root@asterix root]# modprobe wcte11xp ZT_CHANCONFIG failed on channel 25: No such device or address (6) /lib/modules/2.4.20-8/misc/wcte11xp.o: post-install wcte11xp failed /lib/modules/2.4.20-8/misc/wcte11xp.o: insmod wcte11xp failed [root@asterix root]# modprobe wcfxo ZT_CHANCONFIG failed on channel 25: Invalid argument (22) Did you f...

...to load the module, I'm getting the same problem. Only turning off/on helps. What can I do? It's very annoying because the box is in hosting and not easy to just restart. The wct1xxp worked fine in the same box (with restarts also). Any idea, hint? Kind regards, Tamas modprobe wcte11xp /lib/modules/2.4.28-magic/misc/wcte11xp.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.28-magic/misc/wcte11xp.o: insmod /...

Hi I'm trying to get a Digium TE110P card working but as soon as I load the module with modprobe wcte11xp the sound stops working for incoming calls (SIP and IAX). I haven't even started to configure the card. Running ztcfg and restarting asterisk doesn't help. After unloading with rmmod wcte11xp the sound comes back for new calls I'm using asterisk 1.2.4, libpri 1.2.2 and zaptel 1.2.3...

...to have my same problem. I'm using Asterisk with the following configuration: Fedora Core 4 (but I also tried Fedora 3) 1 Digium TE110P 1 TDM40B 1 HFC-S 'Cologne' bristuff 0.2.0-RC8o (zaptel 1.0.9.2) I compiled right, I can load kernel modules but when I try to unload wcte11xp module (the one for TE110P card) I get a kernel panic: Kernel panic - not syncing: /usr/src/bristuff-0.2.0-RC8o/zaptel-1.0.9.2/wcte11xp.c:333: spin_lock(usr/src/zbristuff-0.2.0-RC8o/zaptel-1.0.9.2/wcte11xp.c:d964000 4) already locked by /usr/src/bristuff-0.2.0-RC8o/zaptel-1.0.9.2/wcte11xp.c/887....

Hello List, i am trying to set up an * box with a debian 2.6.10 Kernel. the compilation of asterisk and the zaptel drivers worked almost perfectly. so i did modprobe zaptel modprobe wcte11xp (which is the correct driver for my card) ztcfg -v and this results in ZT_SPANCONFIG failed on span 1: No such device or address (6) I don?t have any ideas whats wrong. google was no help, checking sources did not help either. restarting the machine does not help. could someone give me a hint pl...

I am having problems loading the zaphfc from bristuff and wcte11xp drivers at the same time. If I load zaphfc then all works fine. If I then load wcte11xp, the card using the zaphfc doesn't pick up calls anymore. I am using bristuff 0.2.0-RC5. Anyone else seen this problem, know of a fix, or can tell me what I am doing wrong? Thanks My zaptel.conf: # hfc-s...

Hi, is it possible to set a wcte11xp card to use a certain IRQ? I've tried a few things but it always shares the IRQ with eth0 even though the system has 4 spare ones. I can't set it via the BIOS. Regards Lee -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/a...

...sday, May 02, 2006 10:54 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Need help configuring TE100P and 3 X100P clonewith MD3200 chipset On Tue, 2 May 2006, Wai Wu wrote: > [root@asterix root]# modprobe zaptel > [root@asterix root]# modprobe wcte11xp ZT_CHANCONFIG failed on > channel 25: No such device or address (6) > /lib/modules/2.4.20-8/misc/wcte11xp.o: post-install wcte11xp failed > /lib/modules/2.4.20-8/misc/wcte11xp.o: insmod wcte11xp failed > [root@asterix root]# modprobe wcfxo ZT_CHANCONFIG failed on channel > 25: Inv...

I have a E110P which I can't seem to make function and i think it has something to do with interrupts, but I've never had to deal with them before and was wondering if someone could offer some guidance. a modprope zaptel loads fine. when i then do modprobe wcte11xp i get the following: /lib/modules/2.4.21-27.0.1.EL/misc/wcte11xp.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.21-27....

Hello all. I have here a TE110P (configured as E1) and a TDM400P (with four X100P - FXS). Both boards are recognized by the operating system as showed above: 0000:08:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device b1d9:0003 Flags: bus master, medium devsel, latency 64, IRQ 169 I/O ports at e800 [size=256]

...> s,3,Answer > exten => s,4,Queue(callqueue|thH) ; here are logged agents waiting for > calls > exten => s,5,Hangup /etc/init.d/zaptel restart gave me this : > Loading zaptel framework: done. > Waiting for zap to come online...OK > Loading zaptel hardware modules: wcte11xp. > Running ztcfg: done. > Even when openvox is not connected to isdn i get online...OK is it ok ? How can it go online when it is not connected ?! lsmod | grep zaptel > lsmod | grep zaptel > zaptel 201928 65 wcte11xp > crc_ccitt 6656 1 zaptel ztcfg...

...P > clones to lines from the phone company. > > > This is my zaptel.conf > > span=1,1,0,d4,ami > fxsks=1-24 > loadzone=us > > fxols=25-27 > loadzone=us > > I then do > > [root@asterix root]# modprobe zaptel > [root@asterix root]# modprobe wcte11xp ZT_CHANCONFIG failed on > channel 25: No such device or address (6) > /lib/modules/2.4.20-8/misc/wcte11xp.o: post-install wcte11xp failed > /lib/modules/2.4.20-8/misc/wcte11xp.o: insmod wcte11xp failed > [root@asterix root]# modprobe wcfxo ZT_CHANCONFIG failed on channel > 25: Inv...

...1. We have followed instructions on your site and from Beronet guide, but card just keeps blinking and nothing happens (also no useful info in logs). Then we suspected cable, but couldn't find out what pinout does PRI interface on te110p have ? 2. Also we've spotted weird behaviour of wcte11xp module. If I do modprobe -r wcte11xp Siemens primergy econel server under Suse 9.2 freezes hard... Is this normal behaviour ? Do we have any debug options on loading module ? How to track this problems ? > span=1,1,0,ccs,hdb3 > bchan=1-15,17-31 > dchan=16 > loadzone=fr > defaultz...

...gister channel '1-15' Jun 13 13:05:41 WARNING[3356] loader.c: chan_zap.so: load_module failed, returning -1 Jun 13 13:05:41 DEBUG[3356] channel.c: Unregistering channel type 'Zap' Jun 13 13:05:41 WARNING[3356] loader.c: Loading module chan_zap.so failed! I checked that the module wcte11xp is loaded before I start asterisk. I can fix the problem when I do: rmmod wcte11xp && modprobe wcte11xp after that rmmod && modprobe asterisk works. The same happens, on a similar machine, the only difference is that I need to load the wcte12xp driver, because of an other card....

...-install wctdm24xxp && /sbin/ztcfg install ztdynamic /sbin/modprobe --ignore-install ztdynamic && /sbin/ztcfg install ztd-eth /sbin/modprobe --ignore-install ztd-eth && /sbin/ztcfg install wct1xxp /sbin/modprobe --ignore-install wct1xxp && /sbin/ztcfg install wcte11xp /sbin/modprobe --ignore-install wcte11xp && /sbin/ztcfg install pciradio /sbin/modprobe --ignore-install pciradio && /sbin/ztcfg install ztd-loc /sbin/modprobe --ignore-install ztd-loc && /sbin/ztcfg install ztdummy /sbin/modprobe --ignore-install ztdummy && /...

Hi, using Sangoma drivers: - doing 'lsmod', I see: zaptel ... wanpipe,wctdm24xxp,wctdm,wcfxo,wcte11xp,wct1xxp,wct4xxp,tor2 I'd like to avoid loading all these modules. What have I to do? - do I need to have 'zaptel' startup script under /etc/init.d ? Thanks -- Domenico Viggiani

Hi people, I'm having some problem when I reboot my machine. Every time that I reboot the system, the zaptel changes the order loading of the cards. I have 3 cards (wcte11xp, wctdm and wcfxo). So, my configs in the zaptel.conf will be always wrong, because I change the config for a order loading, and when I reboot its change! I tryed to see the config in /etc/udev/ but I think its right, because the cards are loaded, but only the order are changed. Thanks in advanc...

...755 sethdlc-new /sbin/sethdlc; \ elif [ -f sethdlc ]; then \ install -D -m 755 sethdlc /sbin/sethdlc ; \ fi if [ -f zttool ]; then install -D -m 755 zttool /sbin/zttool; fi for x in zaptel.ko tor2.ko torisa.ko wcusb.ko wcfxo.ko wctdm.ko wctdm24xxp.ko ztdynamic.ko ztd-eth.ko wct1xxp.ko wcte11xp.ko pciradio.ko ztd-loc.ko ztdummy.ko zttranscode.ko; do \ rm -f /lib/modules/2.6.9-42.0.3.ELsmp/extra/$x ; \ done; \ make -C /usr/src/linux SUBDIRS=/usr/src/zaptel-1.2.13 INSTALL_MOD_PATH= INSTALL_MOD_DIR=misc modules_install; make[1]: Entering directory `/usr/src/kernels/2.6.9-42.0.3.E...

...nfiguration ====================== 1 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address (6) # lsmod ... ztdummy 8072 0 wcusb 24096 0 wctdm 47680 0 wcfxo 17568 0 wctdm24xxp 93252 0 wcte11xp 33184 0 wct1xxp 22688 0 wct4xxp 300864 0 tor2 98600 0 zaptel 207492 9 ztdummy,wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wct4xxp,tor2 crc_ccitt 6337 1 zaptel # dmesg ... Zapata Telephony Interface R...