search for: watchguards

Has any had any experiences with Watchguard Firebox 1000 and Asterisk. I have asterisk on public side and phones on the private side. I am able to get the phones to register and make outbound calls but the inbound calls are intermittent. I have NAT enable in asterisk and on the Cisco 7960. Any insight would be appreciated. Thanks

Has anyone here used Asterisk inside a WatchGuard firewall, talking via the WatchGuard SIP Application Layer Gateway to an outside SIP service? I have a customer doing just that, and I am 100% convinced there is a bug in the ALG regarding the media port number it inserts into the SDP when it rewrites it. However, either they or WatchGuard will not accept there is a bug, despite my very detailed

We are trying to setup a sip connection behind a Watchguard Firebox 1000 and it is simply put...not working. The ports are all forwarded but the packets are not going out. It is as if the firewall simply ignores SIP packets. Has anyone seen this or have any idea what the issue could be? Watchguard so far has been of zero help. Kerry Garrison Director of Technical Services Tech Data Pros -

I am trying to install the WatchGuard VPN client that works on my WinXP system on to Ubuntu 7.04 Feisty Fawn. Here are the errors that happen half way thru the install. tfrench at tfrench-desktop:~$ winefile fixme:rpc:alloc_serverprotoseq protseq "mswmsg" not supported fixme:rpc:I_RpcServerStopListening (): stub fixme:rpc:I_RpcWindowProc (0x20054,00000002,00000000,00000000): stub

Hello, I am trying to use WINE (20050725-r1 on Gentoo Linux) to install/run Watchguard's Firebox Management Software (WFS). The WFS installer uses an installshield installer of course.. I've been looking thru the FAQ, wiki, etc and have found info about DCOM98 needing to be installed. I've tried a bunch of things so far, and here's where I stand: First, I tried getting

I am considering replacing my old checkpoint and watchguard firewalls witha single Linux box using iptables and shorewall. I have two ISP''s (with separate routing tables), two DMZ''s, at least one VPN to a remote office, and a local trusted network. The configuration will look like: +----------------+ | | net0 ----------+ eth1

Hi Timo/everyone, Currently we are logging the remote IP, but is there a way to show the IP address that the NAT connection is coming from? The reason I ask is, we are changing ISPs, and I would like to see in the logs when an external connection is coming from our OLD ISP connection, and when it is coming through our new one. We have a Watchguard firewall, and I have both External

I want to use shorewall to setup my school network (because using the watchguard firewall has some problem), in school has one TrendMicro Interscan-VirusWall and one Linux server that inculde sendmail and apache service, the Interscan-VirusWall will receiving e-mail through watchguard firewall and then auto scan virus if no virus problem that will send to Linux sendmail service. Our

I've actually been thinking about it almost since the beginning. It's just been annoying waste of space on my screen. And more importantly nowadays it's also breaking DKIM/DMARC signatures. So if somebody still uses Subject-based filtering it's about time to switch to List-ID header based filtering now. Another thing I'm wondering about is if I should allow text/html parts,

Our setup: server running shorewal 4.5.2.2 and watchguard vpn appliance. VPN appliance was supplied by our document flow provider. I want to route traffic to 192.168.2.0/24 via 10.10.10.1 gateway. So I thought it would be a good idea to set it up as another ISP in the providers file. But when I enable it I can reach 192.168.2.0/24 subnet but not internet. Can you please tell what I am doing

I have been playing with asterisk for a couple of weeks now and I have been very happy with its performance. However, I have run into a problem with how I want to deploy this solution. I have a mix of softphones (SJ and Xlite), ATA's, and a couple of IP phones (Snom 190). The asterisk box is on the public network. For my primary users they will reside behind a watchguard 4500 firewall.

https://bugzilla.netfilter.org/show_bug.cgi?id=982 Bug ID: 982 Summary: vfork() in xtables.c can corrupt stack Product: iptables Version: 1.4.x Hardware: x86_64 OS: other Status: NEW Severity: normal Priority: P5 Component: iptables-restore Assignee: netfilter-buglog at

Hi there, I am trying to setup a configuration that requires me to use SIP and asterisk behind a firewall and over a VPN to a remote office and with some local Phones also. I can't use IAX to my provider because they don't offer it and my handsets ( snom 300 ) also don't support IAX so it's all SIP. The configuration is a follows Asterisk PBX 10.202.17.217/24 ------>|

Hello About every three months, my dad's little Asterisk server that handles his business phone line with an OpenVox PCI card stops taking calls. To check if it's the cause, I'd like to run a CRON job every night to restart Zaptel and Asterisk. Before I go ahead, I'd like to know if I can just send the following commands, or if there are issues I should know about:

is there any possibility to do this on cent os for example company one will be in the block of 10.0.0.0.1-10.0.0.255 and routed to the one of my external ip company two will be in the block of 11.0.0.0.1-11.0.0.255 and routed to the one of my external ip i just need an advice is this better on windows vpn or llinux vpn server do you advice me any server software like open vpn or sth. else thank

Hello list. I have new server on CentOS 4.1 - fresh installation. During security tests I've noticed: When I scan server ports (nmap) from the outside there is 21 tcp port open. But when I check on the server (netstat -tan or lsof -i) there is no any open 21 tcp port. Any ideas? To be honest I'm confused. Regards P.S.: of course I don't have started FTP service. Even I don't

Hello, Server rsyncd [root@data1 steve]# rsync --version rsync version 2.6.9 protocol version 29 [root@data1 steve]# uname -a Linux data1.contact-24-7.local 2.6.9-55.0.2.ELsmp #1 SMP Tue Jun 26 14:30:58 EDT 2007 i686 i686 i386 GNU/Linux [root@data1 steve]# Client rsync [root@srv01 cron.daily]# rsync --version rsync version 2.6.9 protocol version 29 [root@srv01 cron.daily]# uname -a

Hi, We have encountered a strange problem recently. We are running Samba as a virtual server on VMware esxi 4.1. The samba version is 3.4.7 and it is connected via one network interface eth0, which seems to have network connectivity as we are able to ping the other subnets. We are residing on the subnet 192.168.100.0/24 and the rest of the offices are on the subnets 192.168.101.0/26,

Hey, The company I work for is in the market for a new firewall. Right now we're hosting all of our own stuff (on CentOS servers) behind an old checkpoint firewall. I think Checkpoint is overkill for our needs and very expensive, plus I don't like the "per-user" charges of some commercial solutions. What do you guys suggest that we upgrade to? Here are some of the

Hi All, I am working on a mystery. I am using openvpn-2.1_beta7-gui-1.0.3-install on all the computers in question. All computers are running XP-Pro-SP2. (Mine is running in a virtual window -- details below.) This configuration works perfectly from my office. I use it to call five facilities: remote aa.bb.cc.dd port 5030 proto udp dev tap ifconfig 192.168.240.30 255.255.255.0 secret