search for: watchguard

Has any had any experiences with Watchguard Firebox 1000 and Asterisk. I have asterisk on public side and phones on the private side. I am able to get the phones to register and make outbound calls but the inbound calls are intermittent. I have NAT enable in asterisk and on the Cisco 7960. Any insight would be appreciated. Thanks

Has anyone here used Asterisk inside a WatchGuard firewall, talking via the WatchGuard SIP Application Layer Gateway to an outside SIP service? I have a customer doing just that, and I am 100% convinced there is a bug in the ALG regarding the media port number it inserts into the SDP when it rewrites it. However, either they or WatchGuard will no...

We are trying to setup a sip connection behind a Watchguard Firebox 1000 and it is simply put...not working. The ports are all forwarded but the packets are not going out. It is as if the firewall simply ignores SIP packets. Has anyone seen this or have any idea what the issue could be? Watchguard so far has been of zero help. Kerry Garrison Director of...

I am trying to install the WatchGuard VPN client that works on my WinXP system on to Ubuntu 7.04 Feisty Fawn. Here are the errors that happen half way thru the install. tfrench at tfrench-desktop:~$ winefile fixme:rpc:alloc_serverprotoseq protseq "mswmsg" not supported fixme:rpc:I_RpcServerStopListening (): stub fixme:rpc:I_...

Hello, I am trying to use WINE (20050725-r1 on Gentoo Linux) to install/run Watchguard's Firebox Management Software (WFS). The WFS installer uses an installshield installer of course.. I've been looking thru the FAQ, wiki, etc and have found info about DCOM98 needing to be installed. I've tried a bunch of things so far, and here's where I stand: First, I tried...

I am considering replacing my old checkpoint and watchguard firewalls witha single Linux box using iptables and shorewall. I have two ISP''s (with separate routing tables), two DMZ''s, at least one VPN to a remote office, and a local trusted network. The configuration will look like: +----------------+ |...

...he remote IP, but is there a way to show the IP address that the NAT connection is coming from? The reason I ask is, we are changing ISPs, and I would like to see in the logs when an external connection is coming from our OLD ISP connection, and when it is coming through our new one. We have a Watchguard firewall, and I have both External connections setup and working, and have just pointed our DNS records to the new public IP, and would like to be able to see which WAN connection/IP they are coming from. Thanks, -- Best regards, Charles

I want to use shorewall to setup my school network (because using the watchguard firewall has some problem), in school has one TrendMicro Interscan-VirusWall and one Linux server that inculde sendmail and apache service, the Interscan-VirusWall will receiving e-mail through watchguard firewall and then auto scan virus if no virus problem that will send to Linux sendmail...

I've actually been thinking about it almost since the beginning. It's just been annoying waste of space on my screen. And more importantly nowadays it's also breaking DKIM/DMARC signatures. So if somebody still uses Subject-based filtering it's about time to switch to List-ID header based filtering now. Another thing I'm wondering about is if I should allow text/html parts,

Our setup: server running shorewal 4.5.2.2 and watchguard vpn appliance. VPN appliance was supplied by our document flow provider. I want to route traffic to 192.168.2.0/24 via 10.10.10.1 gateway. So I thought it would be a good idea to set it up as another ISP in the providers file. But when I enable it I can reach 192.168.2.0/24 subnet but not interne...

...n very happy with its performance. However, I have run into a problem with how I want to deploy this solution. I have a mix of softphones (SJ and Xlite), ATA's, and a couple of IP phones (Snom 190). The asterisk box is on the public network. For my primary users they will reside behind a watchguard 4500 firewall. For the others there will be a mix of Ethernet routers (Linksys/Netgear/DLink). I have been testing the different deployments and have found that the softphones and ATA's work like a champ in getting around the firewall and the NAT of the work at home users. However the...

...oduct: iptables Version: 1.4.x Hardware: x86_64 OS: other Status: NEW Severity: normal Priority: P5 Component: iptables-restore Assignee: netfilter-buglog at lists.netfilter.org Reporter: dan.wilder at watchguard.com Created attachment 451 --> https://bugzilla.netfilter.org/attachment.cgi?id=451&action=edit Move some code to avoid cautions in vfork man page Running iptables-restore on an embedded platform containing no modprobe program, the following lines in xtables.c lead to corrupted stack fra...

...also don't support IAX so it's all SIP. The configuration is a follows Asterisk PBX 10.202.17.217/24 ------>| 10/100-Switch |-----> Firewall1 pfsense X.Y.Z.250 -------->ITSP Sip Porvider public internet LocalPhones 10.202.17.1-25/24 -_---->| 10/100-Switch |-----> Firewall2 Watchguard ----->ISP internet Connection <-----Firewall3 | remote office | ----Remote User Phone 192.168.97.74/24 There is a Lan2Lan VPN tunnel between the Firewall2 and the Remote Office Firewall3 I can Ping the remote office phone from the asterisk PBX at all times. Now I have my Sip.conf setup wit...

...ahead, I'd like to know if I can just send the following commands, or if there are issues I should know about: /usr/local/etc/rc.d/asterisk stop /usr/local/etc/rc.d/zaptel stop /usr/local/etc/rc.d/zaptel start /usr/local/etc/rc.d/asterisk start Or, as I suspect, if there's already a good watchguard applet available, I could use that instead. FWIW, it's a FreeBSD 6.3 host, running Zaptel 1.4.0-BSD and Asterisk 1.4.21.2. Thank you.

is there any possibility to do this on cent os for example company one will be in the block of 10.0.0.0.1-10.0.0.255 and routed to the one of my external ip company two will be in the block of 11.0.0.0.1-11.0.0.255 and routed to the one of my external ip i just need an advice is this better on windows vpn or llinux vpn server do you advice me any server software like open vpn or sth. else thank

Hello list. I have new server on CentOS 4.1 - fresh installation. During security tests I've noticed: When I scan server ports (nmap) from the outside there is 21 tcp port open. But when I check on the server (netstat -tan or lsof -i) there is no any open 21 tcp port. Any ideas? To be honest I'm confused. Regards P.S.: of course I don't have started FTP service. Even I don't

Hello, Server rsyncd [root@data1 steve]# rsync --version rsync version 2.6.9 protocol version 29 [root@data1 steve]# uname -a Linux data1.contact-24-7.local 2.6.9-55.0.2.ELsmp #1 SMP Tue Jun 26 14:30:58 EDT 2007 i686 i686 i386 GNU/Linux [root@data1 steve]# Client rsync [root@srv01 cron.daily]# rsync --version rsync version 2.6.9 protocol version 29 [root@srv01 cron.daily]# uname -a

...s flowing correctly and http, sftp and icmp ping etc is also working within our mpls-network. I'm for example able to "Teamview" or rdp into any machine within our local network on all the subnets. The samba server itself has no firewall activated. All the servers are behind a Watchguard firewall and a rule for SMB-traffic is active and has always worked before. Samba has the role of a PDC with authentication via ldap. This works as expected and Samba works well with computer, groups and people-accounts in ldap. When a user from another subnet uses RDP to rdp into one of ou...

Hey, The company I work for is in the market for a new firewall. Right now we're hosting all of our own stuff (on CentOS servers) behind an old checkpoint firewall. I think Checkpoint is overkill for our needs and very expensive, plus I don't like the "per-user" charges of some commercial solutions. What do you guys suggest that we upgrade to? Here are some of the

Hi All, I am working on a mystery. I am using openvpn-2.1_beta7-gui-1.0.3-install on all the computers in question. All computers are running XP-Pro-SP2. (Mine is running in a virtual window -- details below.) This configuration works perfectly from my office. I use it to call five facilities: remote aa.bb.cc.dd port 5030 proto udp dev tap ifconfig 192.168.240.30 255.255.255.0 secret