search for: wallett

...gt; >Really all that? In my experience, which is admittedly only on the blue >iaxys and not the black ones, was just provision it, unplug power, >replug power. The black one I have now I haven't had to re-provision >yet so this could be so on them.... > > > >Michael Wallette wrote: > > >>> If you want to change >>> settings on the Iaxy, you must reset it (press the "reset" button on the >>> back, hold it for ten seconds, unplug the RJ-11, RJ-45 and power cables >>> from the Iaxy while holding the reset button, then...

Hi.. I have to setup an extension in a remote location that will use a cordless analog telephone.. I am looking at the IAXY to do this for me..Basically the data path will be as follows... [Asterisk] == (NAT) == {Internet} == (NAT) == ATA -- Handset Since there are two NAT boxes in the path I know SIP won't work.. I also don't want to move the Asterisk box to the internet side of the

There's an excellent tutorial on Cisco's web page at http://www.cisco.com/en/US/tech/tk652/tk701/technologies_white_paper09186a00800d6b68.shtml It will tell you just about everything you wanted to know about echo and more :) The short answer to your question, however, is that echo is comprised of two components: volume and delay. Increase either one and the problem gets worse. In the