search for: w32tm

...sing the DC for time sync > even though that specific GPO was removed (all of the others cheerfully > started using the DC) and I needed to reset the time service to get it to > work as intended. > Do this in an elevated prompt: > ========================== > net stop w32time > w32tm /unregister > w32tm /register > net start w32time > ========================== > > There was also a snag with the DC after the upgrade. I was following my own > post from the past - > https://lists.samba.org/archive/samba/2021-March/235228.html - but the DC > was not acting...

I have the impression your DC?s ntp server is not working properly for whatever reason. Your windows machines try to grab time for them, can?t, and then default to local coms clock or some other time source. From a windows member machine, can you try : w32tm /stripchart /computer:us.pool.ntp.org /dataonly /samples:5 That should work. Then try: w32tm /stripchart /computer:your.dc.address /dataonly /samples:5 And see if you get a similar response. On Jan 16, 2024 at 20:31 +0100, Mark Foley <mfoley at novatec-inc.com>, wrote: > > As I'v...

...ts.samba.org> > > I have the impression your DC?s ntp server is not working properly for whatever reason. Your windows machines try to grab time for them, can?t, and then default to local coms clock or some other time source. > > From a windows member machine, can you try : > > w32tm /stripchart /computer:us.pool.ntp.org /dataonly /samples:5 > > That should work. Then try: > > w32tm /stripchart /computer:your.dc.address /dataonly /samples:5 > > And see if you get a similar response. > On Jan 16, 2024 at 20:31 +0100, Mark Foley <mfoley at novatec-inc.com&...

...erver is correctly synchronized with NTP server. > > > I don't understand the reason of my problem, and don't know were to start > > investigating. > > > Has anybody got this issue ? > > Got exactly your problem two days ago. > From elevated shell: > > w32tm /unregister > reboot > w32tm /register > w32tm /config /manualpeerlist:time.example.com /syncfromflags:MANUAL > /update > time /T (To test if synchronization done correctly) > > time.example.com is your domain time server - either AD DC or an NTP > server it > is synchron...

...UNNING (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN) CODICE_USCITA_WIN32 : 0 (0x0) CODICE_USCITA_SERVIZIO : 0 (0x0) PUNTO_CONTROLLO : 0x0 INDICAZIONE_ATTESA : 0x0 Windows is able to find NTP servers: C:\Users\gaio>w32tm /monitor È in corso il recupero dell'elenco dei controller di dominio Active Directory pe vdc3t1.ad.fvg.lnf.it[10.99.21.1:123]: ICMP: 16ms ritardo NTP: +0.0175839s differenza di tempo dall'orologio locale RefID: vdcud1.ad.fvg.lnf.it [10.99.1.3] Strato: 4 vdcsv1.ad...

Hi ! Actually, problem was located on client side, not samba side. w32time has "disappeared" from services list (!) the w32tm /unregister and w32tm /register solve the problem My clients seem to be correctly synchronised with my AD DC now. If i find out why w32time has disappeared, I'll post a message here. Thank you for your help ! 2015-04-22 16:02 GMT+02:00 Andrey Repin <anrdaemon at yandex.ru>: > Gre...

...> I've created the Group Policy for the "Time Sources". This doesn't seem to be > working. This did work fine with my old 4.8.2 DC, so I know it works in > principle. > > I have additional notes and have tried (on the Windows member): > > net stop w32time > w32tm /unregister > w32tm /register > net start w32time > > I've rebooted both the DC and the Windows member. On the Windows member I still > get: > >> w32tm /query /source > Local CMOS Clock > > whereas I expect the return to be "dc1.hprs.locl" > > I...

...'Date & Time settings > Sync Now' always gives "Time synchronization failed". For Windows 7 workstations, several years ago, I followed the advice in https://www.meinbergglobal.com/english/info/ntp-w32time.htm which was to do the following on the Windows 7 workstations: w32tm /config /manualpeerlist:mail,0x8 /syncfromflags:MANUAL w32tm /config /update Check the configuration: w32tm /query /source This worked and time was in-sync on the WIN7 computers for many years. I did this after upgrading/installing each Windows 10 workstation during 2019 Q4 and 2020 Q1, but app...

...the wikis would mention the GPO not being > needed. Did you see the section titles "Default Time Source" in the page you link to that I quoted previously? The wiki clearly spells it out that using a GPO is usually unnecessary. > How do you know you're syncing with the DC? 'w32tm /query /status' will show you. > What does your 'w32tm /query /source' give you? My Windows domain members point to the DC. Chris

Further investigations reveal: --- C:\WINDOWS\system32> w32tm /monitor GetDcList failed with error code: 0x800706BA. Exiting with error 0x800706BA --- error 0x800706BA indicates that the RPC server is unavailable. Any ideas? Thanks, Jonathan Kreider On Tue, Nov 6, 2018 at 5:48 PM Jonathan Kreider <jonathan.kreider at gmail.com> wrote: > > Th...

...ssfully set the time by specifying the DC-hostname directly, but the help text says internet synchronization only occurs _weekly_ (weakly?). It says if you are part of a domain, your clock is automatically synchronized with the PDC. But my computer doesn't appear to be doing this. When I ask w32tm to compare it's local clock to the "Domain's" network time: > w32tm /monitor /domain:Bliss # I get: GetDcList failed with error code: 0x80070774. Exiting with error 0x80070774 --- In the system log, I see the following message: Time Provider NtpClient: This machine i...

Hi Marco, As far i can see here. Are all your ADDC servers set to the same source NTP ( preffered a stratum 1 or 2 ) server. ( and not pool ntp sources ) Because below i see stratum 4 and stratum 3 servers and a timeout on one server. When i look at this. > C:\Users\gaio>w32tm /query /peers > N. peer: 1 > Peer: vdcpp2.ad.fvg.lnf.it > Stato: Attivo > Tempo rimanente: 914.2880000s...

...icy for the "Time Sources". This doesn't seem to be > > working. This did work fine with my old 4.8.2 DC, so I know it works in > > principle. > > > > I have additional notes and have tried (on the Windows member): > > > > net stop w32time > > w32tm /unregister > > w32tm /register > > net start w32time > > > > I've rebooted both the DC and the Windows member. On the Windows member I still > > get: > > > >> w32tm /query /source > > Local CMOS Clock > > > > whereas I expect the r...

.... > > > > > > For Windows 7 workstations, several years ago, I followed the advice in > > > https://www.meinbergglobal.com/english/info/ntp-w32time.htm which was to do the following on > > > the Windows 7 workstations: > > > > > > > > > w32tm /config /manualpeerlist:mail,0x8 /syncfromflags:MANUAL > > > w32tm /config /update > > > > > > Check the configuration: > > > > > > w32tm /query /source > > > > > > This worked and time was in-sync on the WIN7 computers for many years....

On Mon, 30 Jan 2017 12:16:30 -0500 James B. Byrne wrote: > I set the client's w32tm configuration this way: > > w32tm /config /update /manualpeerlist:"time.nrc.ca time.chu.nrc.ca" > /syncfromflags:ALL > > And when I check the status with > > w32tm /query /status > > then I see this: > > Leap Indicator: 0(no warning) > Stratum: 3 (secon...

...clients. Alternative > configuration options for the clients are described below." > > I've only used a GPO to point to a different time server when the DC > is incapable of providing the time service (older DC running in a > container). > Chris When I initially did 'w32tm /query /source' on the Windows domain member I got back time.windows.com, not the DC. On my current Samba DC I had to set the NTP server on the Windows 10 computers when using the Samba DC. I missed a couple of commands in my previous post. On the Windows as Admin: net stop w32time w32tm...

...nisation_on_a_Windows_Domain_Member. I've created the Group Policy for the "Time Sources". This doesn't seem to be working. This did work fine with my old 4.8.2 DC, so I know it works in principle. I have additional notes and have tried (on the Windows member): net stop w32time w32tm /unregister w32tm /register net start w32time I've rebooted both the DC and the Windows member. On the Windows member I still get: > w32tm /query /source Local CMOS Clock whereas I expect the return to be "dc1.hprs.locl" I have confirmed that the Group Policy exists and is conf...

...I have been working on several of the domain clients and I cannot seem to get them to source from the Samba server. I have confirmed that ntpd is running on the AD-DC and listening on udp:123. I have also confirmed that udp:123 is not blocked by the firewall at either end. I set the client's w32tm configuration this way: w32tm /config /update /manualpeerlist:"time.nrc.ca time.chu.nrc.ca" /syncfromflags:ALL And when I check the status with w32tm /query /status then I see this: Leap Indicator: 0(no warning) Stratum: 3 (secondary reference - synced by (S)NTP) Precision: -6 (15.62...

Hi, I have set a Samba AD DC on my network. Version is 4.1.17 on a Debian Wheezy. I have an issue on my Windows XP SP3 clients : the time on these computers is not synchronized with my Domain Controler. Big problem is, if time difference is considerable (more or less 5 minutes), users can not log in. On the other hand, my server is correctly synchronized with NTP server. I don't

...er. >> >> > I don't understand the reason of my problem, and don't >know were to start >> > investigating. >> >> > Has anybody got this issue ? >> >> Got exactly your problem two days ago. >> From elevated shell: >> >> w32tm /unregister >> reboot >> w32tm /register >> w32tm /config /manualpeerlist:time.example.com /syncfromflags:MANUAL >> /update >> time /T (To test if synchronization done correctly) >> >> time.example.com is your domain time server - either AD DC or an NTP &gt...