search for: w2g1

...99.993 -- Average: 99.996193, Difference: 99.996683 [root at sitges bin]# service wanrouter stop Shutting down asterisk: [ OK ] Stopping Asterisk... Shutting down wanpipe4 interface: w4g1 Shutting down wanpipe3 interface: w3g1 Shutting down wanpipe2 interface: w2g1 Shutting down wanpipe1 interface: w1g1 Shutting down device: wanpipe4 Shutting down device: wanpipe3 Shutting down device: wanpipe2 Shutting down device: wanpipe1 No devices running, Unloading Modules [root at sitges bin]# service wanrouter start Starting WAN Router... Loading WAN drivers: wanpip...

Hi all, I need to connect my Asterisk 1.4.26 with a Sangoma PRI card (configures with signalling=pri_net)) to a Cisco 2800 PBX. After connecting the cables everything seems fine (ifconfig w2g1 is ok, wanpipemonitor gives no errros, the span is up and active, green light on the card) but when I make a test with my iax phone, there's no way to dial the PBX and I get this WARNING: [Jul 2 15:20:36] VERBOSE[15004] logger.c: -- Accepting AUTHENTICATED call from XXX.XXX.XXX.XXX:...

...ORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 0DB FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES wanpipe2.conf: [devices] wanpipe2 = WAN_AFT_TE1, Comment [interfaces] w2g1 = wanpipe2, , TDM_VOICE, Comment [wanpipe2] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 1 FE_MEDIA = T1 FE_LCODE = B8ZS FE_FRAME = ESF FE_LINE = 2 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 0DB FE_TXTRISTATE = NO MTU = 1500 UD...