search for: vwic2

...you get. Some have more experience then others. > > While your 2600 from 2001 timeframe it should work, you can't run any of > 12.4T images over the last 3 years without maxing the DRAM/Flash. > > I've got 1200+ Forced Authorization Codes with 4.1(3)SR1 using > 2811ISRs/VWIC2-1MFT-T1s running 12.4T with both MGCP and H323 gateways > across 20 sites with no issues. Could be the old 2600s IOS as you > mentioned. Thanks for the feedback Jason. We figured putting in a new router would make it work. But this was the customer's router, and they didn't want t...

Hi All, Just wanted to share a story: We turned up a new customer yesterday evening, typical situation, Cisco 2600 Router with T1 PRI card pointed to the customer's analog PBX with 2 data T1's linked back to our network. The router PRI was configured as a gateway on our CCM 4, like we've done numerous times in the past. The customer needed LD Authorization codes enabled, got

...across VWIC cards. The spans do NOT use NFAS. ================== My equipment/software: ================== 2x Digium TE210 dual T1/E1 with hw echo canceler and timing cable installed. Asterisk 1.8.12 dahdi 2.5.0.1 libpri 1.4.12 ============== Provider equipment: ============== Cisco 2821 with 2 VWIC2- at MFT-T1/E1 ======================= Log sample with ISDN debug on ======================= [Jan 14 12:56:04] VERBOSE[13262] chan_dahdi.c: [Jan 14 12:56:04] PRI Span: 4 [Jan 14 12:56:04] VERBOSE[13262] chan_dahdi.c: [Jan 14 12:56:04] PRI Span: 4 < Protocol Discriminator: Q.931 (8) len=87 [Jan...