search for: vickers

On Sat, Jan 3, 2015 at 2:27 PM, Darby Vicker <darby.vicker at gmail.com> wrote: > On Saturday, December 20, 2014, Darby Vicker <darby.vicker at gmail.com> wrote: >> >> I thought about trying centos 7. But in the end that doesn't really >> help me since I'm trying to keep my current centos 6 installation >> working. I don't really have the

I thought about trying centos 7. But in the end that doesn't really help me since I'm trying to keep my current centos 6 installation working. I don't really have the time/energy to reinstall everyting under CentOS 7 right now. I was able to get a 6.6 LiveCD built myself. The liveCD has the same problem - X doesn't work. I can boot the "Basic Video" option from the

...rd has been on my shelf a while so I wonder if it needs a firmware upgrade ? Can the cards be firmware upgraded? I got the modules from CVS, are they packaged with version version 1.0.2 some place or is getting the modules from CVS the correct thing to do? Config files are below. Thanks Mark Vickers RealNetworks, Inc. ____________________________________________________________ root@asterisk:~# /sbin/modprobe zaptel root@asterisk:~# /sbin/modprobe wct4xxp From dmesg: Zapata Telephony Interface Registered on major 196 Found TE410P at base address fc200000, remapped to e088f000 TE410P vers...

...f in that statement... What would the repercussions be? All I'm interested in doing is simple file sharing. By the way, what's the opposite of --with? --without? Thanks -----Original Message----- From: Doug VanLeuven [mailto:roamdad@sonic.net] Sent: Tuesday, April 12, 2005 5:57 PM To: Roy Vickers Cc: samba@lists.samba.org Subject: Re: [Samba] AIX and libldap.a Roy Vickers wrote: >I'm trying to get Samba 3.0.4.0 to run on AIX 5.2 and I am fighting a >"Dependent module libldap.a could not be loaded" bug. I have IBM's version >of LDAP installed but it doesn't h...

...qno: 001 Type: IAX Subclass: REGACK Timestamp: 00019ms SCall: 08339 DCall: 16175 [**.**.***.***:4673] USERNAME : 5111 DATE TIME : 2009-06-30 15:27:40 REFRESH : 60 APPARENT ADDRES : IPV4 **.**.***.***:4673 CALLING NUMBER : 5111 CALLING NAME : Ade Vickers (home) Note in particular: Tx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL Timestamp: 00000ms SCall: 04050 DCall: 16174 [**.**.***.***:4673] Whenever this happens, the phone loses connection until a REGACK is received. This started happening when I upgra...

Was there any resolution on this I also have a TE410P in an box with an Intel E7501 chipset? -Vickers -------- Original Message -------- Subject: RE: [Asterisk-Users] Re: TE410P card in an HP-Compaq DL380 G4 server Date: Tue, 8 Feb 2005 11:13:24 +1030 From: Peter Childs <peter.childs@nec.com.au> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digi...

.../linux guy not a PBX guy and the architecture and nomenclature are unfamilure to me, is there a PBX book I should read for background info. Oh and how does one make the equivalent of a defaut route in the dial plan, ie any call not listed in the dial plan goes out the T1 Thanks in advance. Mark Vickers, RealNetworks Inc. Desk: (206) 674-2391 Fax: (206)674-3588

...rts and report back - initial attempt to install from wheezy backports is not working! (New package won't install when running 'aptitude -t wheezy-backports install nut-server', even though aptitude got the updated package list correctly...) Thanks, Greg On 14/11/2014 9:57 pm, Greg Vickers wrote: > Hi all, > > (Keeping this in a separate email from my first one so as to not make > it horribly complex) > > I've connected my Belkin F6C120auUNV UPS to my Debian 7.7.0 host via > USB, and found that the usbhid-ups driver will not start unless I use > the opt...

Hello, I am looking for a sample size function for samples sizes, to test proportions that are not binomial proportions. The proportions represent a ratio of (final measure) / (baseline measure) on the same experimental unit. Searches using RSeek and such bring multiple hits for binomial proportions, but that doesn't seem to fit my situation. Perhaps there's some standard terminology

Hi all, (Keeping this in a separate email from my first one so as to not make it horribly complex) I've connected my Belkin F6C120auUNV UPS to my Debian 7.7.0 host via USB, and found that the usbhid-ups driver will not start unless I use the option '-u root', even when starting this driver as root: root at monitor:/lib/nut# cat /etc/nut/ups.conf [greything] driver =

Hi all, I've got nut going with a Belkin F6C120auUNV. I'm able to communicate with the UPS, upsc gives data: $ sudo upsc BelkinUPS battery.charge: 37 battery.charge.low: 30 battery.charge.warning: 30 battery.runtime: 120 battery.type: PbAc battery.voltage: 23.7 ... I've enabled the CGI, and when I go to upsstats.cgi, I see a line entry like this: System: BelkinUPS Model: [error:

On Feb 11, 2014, at 6:52 AM, Greg Vickers wrote: > hosts.conf: > MONTIOR admin at localhost "BelkinUPS" The second field is upsname at hostname (rather than username at hostname). Along these lines, the third field is descriptive only, and doesn't need to match anything (e.g. "Belkin UPS at the bottom of the rac...

On Saturday, December 20, 2014, Darby Vicker <darby.vicker at gmail.com> wrote: > I thought about trying centos 7. But in the end that doesn't really > help me since I'm trying to keep my current centos 6 installation > working. I don't really have the time/energy to reinstall everyting > under CentOS 7 right now. > > I was able to get a 6.6 LiveCD built

On 1/5/2015 9:24 PM, Darby Vicker wrote: > He is suggesting I get in touch with the people who maintain the > CentOS kernel. that would be Red Hat, unless you're talking about the CentOS Plus kernel.... -- john r pierce 37N 122W somewhere on the middle of the left coast

...the lines with "SIP/" are gone. ************************ "Show dialplan" before: ************************ asterisk01*CLI> [ Context 'default' created by 'pbx_config' ] '0001' => -1. Dial() [pbx_config] 1. Dial(SIP/mvickers) [pbx_config] '0002' => -1. Dial() [pbx_config] 1. Dial(SIP/jgb) [pbx_config] '0003' => -1. Dial() [pbx_config] 1. Dial(SIP/markw) [pbx_config] '0004' => -1. Dial() [pbx_config]...

...P address instead of NetBIOS name. The following don't seem to work: smbclient -I 172.16.0.43 -M smbclient -M -I 172.16.0.43 The bottom one tries to interpret -I as the host name. What's up?... and don't say my head!!!! ;-) Thanks in advance, sorry if it's been asked before -Vickers

Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. - Tim On 02/12/2014 06:46 PM, Greg Vickers wrote: > Hi all, > > I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and > configured nut appropriately. The cgi scripts are working fine, but on > upsstats.cgi, the Batter, UPS Temp and Battery Runtime fields are all > blank - and there are no entries for thes...

I now have an OpenVox A400P and it is working well. Thanks to Ade Vickers for the recommendation, which I second. However, I need to make a slow transition between a conventional multiple-extension setup and a full VoIP network on these premises. So at the moment the Asterisk box shares the PSTN connection with several conventional analogue handsets. The desired result...

...ed that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. Tim, is this the issue you mentioned on 2014-02-02 with blocks 0x9 and 0x13? I'll reply to that email. > On 02/12/2014 06:46 PM, Greg Vickers wrote: >> Hi all, >> >> I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and >> configured nut appropriately. The cgi scripts are working fine, but on >> upsstats.cgi, the Batter, UPS Temp and Battery Runtime fields are all >> blank - and ther...

Does such a beastie exist? I've tried a couple of UT Starcom WiFi SIP phones (the F1000g and F3000 respectively), and found them both to be seriously lacking - regular crashes (especially the F3000), poor battery life, and poor reception in particular. However, whilst SIP phones are great, I'd really like an IAX2 phone if there is one, as I can make that work "natively" though