search for: usbserial

...l-to-USB converter inside. This being the case, there should be a "/dev/ttyUSBx" device which the megatec driver could use just as if it were talking to the UPS over an RS232 cable. But... either this isn't the case, or these converters aren't recognized by the kernel's "usbserial" driver as such, and all that needs to be done is just convice the kernel to see the converter. This is something that I would like to know (even if just to be able to point people who email me about not having serial ports available, or with models that lack a serial interface, in the right...

...l-to-USB converter inside. This being the case, there should be a "/dev/ttyUSBx" device which the megatec driver could use just as if it were talking to the UPS over an RS232 cable. But... either this isn't the case, or these converters aren't recognized by the kernel's "usbserial" driver as such, and all that needs to be done is just convice the kernel to see the converter. This is something that I would like to know (even if just to be able to point people who email me about not having serial ports available, or with models that lack a serial interface, in the right...

...[POWERCOM CO., LTD. USB to Serial] on usb-0000:00:0b.0-3 usb 2-3: New USB device found, idVendor=0d9f, idProduct=0002 usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-3: Product: USB to Serial usb 2-3: Manufacturer: POWERCOM CO., LTD. usbcore: registered new interface driver usbserial usbserial: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core usbserial: USB Serial support registered for DeLorme Earthmate USB usbserial: USB Serial support registered for HID->COM RS232 Adapter usbserial: USB...

...I go back to the command line and my command it runs just fine. Any ideas on what might be happening here? Jerry extensions.conf exten => s,1,ChanIsAvail(Console/Dsp) exten => s,n,GotoIf($["${AVAILCHAN}" = ""]?smvoice-busy,s,1) exten => s,n,System(/home/silentm/bin/usbserial -start) exten => s,n,Playback(beep) exten => s,n,Dial(Console/dsp) exten => s,n,Hangup exten => h,1,System(/home/silentm/bin/usbserial -stop)

Hi I have to use a windows application tu upload firmware to a controller. It uses the serial port. I use a MacBook with Tiger 10.4.8 I have installed a usb-serial converter. The device is /dev/tty.usbserial tilo-lutz:~/.wine/dosdevices tilolutz$ dir /dev/tty.usbserial crw-rw-rw- 1 root wheel 9, 8 Feb 24 17:31 /dev/tty.usbserial I was able to compile wine 0.9.31 with help of darwine. I'm able to call the example programs and other programs too. As written in documentation I created a sym...

Hello! At first, i want to run the latest HandBrake (version 0.93) on a Mac with Mac OS 10.4 (Tiger). The problem is, that Handbrake is developed for Mac OS 10.5 (XCode SDK is not compatible to Mac OS 10.4 one). So i decided to try it with wine/darwine. Because wine is better supported on Linux and you can get easier newer version (apt-get), i decided to run HandBrakeCLI.exe on Debian Etch

...nel panic past days, now using the unsuported kernel and comes out again the same error. This time on '2.6.9-22.0.1.106.unsupported' kernel See attached logs, Env is the same with the same box, Hope it helps. TIA. JJ Garcia -------- Original Message -------- Subject: Kernel panic in usbserial. Date: Thu, 15 Dec 2005 12:09:53 +0100 From: J.J.Garcia <stigmatedbrain at gmail.com> To: CentOS mailing list <centos at centos.org> Hi all, Running a Centos 4.2 default config in a P4 1.7 Mhz 512 MB Usb 1.1 (Acer Aspire 1400 XV Laptop) with a usb2serial interface plugged from the sys...

...ps: 0000 [#1] Dec 14 23:58:10 smarteyebox kernel: Modules linked in: ppdev nfs lockd radeon parport_pc lp parport autofs4 eeprom i2c_sensor i2c_i801 i2c_dev i2c_core sunrpc ds ipt_REJECT ipt_state ip_conntrack iptable_filter ip_tables dm_multipath button battery ac hci_usb bluetooth joydev ftdi_sio usbserial yenta_socket pcmcia_core uhci_hcd shpchp snd_intel8x0m snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore e100 mii floppy dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod Dec 14 23:58:10 smarteyebox kernel: CP...

...MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=fff5 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=USB Storage S: SerialNumber=000000000002 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbserial_generic E: Ad=89(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ..... ..... i use the usb_modeswitch to detach it as a storage dev and attach it to a usb dev usb_modeswitch -v 0x19d2 -p 0xfff5 -d 1 19d2:fff5 usb_modeswitch -v 0x19d2 -p 0xfff5 -H 1 now i modp...

...ex driver was not working. On the other hand I've tried to run the command suggested. But no success. I got this information when running the dmesg command after running the modprobe $ sudo modprobe ftdi_sio vendor=0x0483 product=0x0035 [35816.111760] usbcore: registered new interface driver usbserial [35816.111792] usbcore: registered new interface driver usbserial_generic [35816.111814] usbserial: USB Serial support registered for generic [35816.136413] usbcore: registered new interface driver ftdi_sio [35816.136440] usbserial: USB Serial support registered for FTDI USB Serial Device $ ls -lr...

...usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hid usb.c: USB device 2 (vend/prod 0x67b/0x2303) is not claimed by any active driver. usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 usbserial.c: USB Serial support registered for PL-2303 usbserial.c: PL-2303 converter detected usbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs) ---------------------------------...

On Feb 26, 2014, at 2:10 AM, Victor Romero wrote: > I got a UPS Sola Basic but it is not working, I'm providing the details. I hope that someone can help me to get it working. > > Please let me know if there is some other information that I should provide :) Thank you for providing all of this information! > OS name and version > Ubuntu 12.04 > $ uname -a > Linux

...in the USB-serial cable, dmesg spits out the following: > > -------------------- > [ 1150.724077] usb 2-1: new full speed USB device using ohci_hcd and address 2 > [ 1150.936841] usb 2-1: configuration #1 chosen from 1 choice > [ 1151.718575] usbcore: registered new interface driver usbserial > [ 1151.721047] usbserial: USB Serial support registered for generic > [ 1151.722382] usbcore: registered new interface driver usbserial_generic > [ 1151.722391] usbserial: USB Serial Driver core > [ 1151.943651] usbserial: USB Serial support registered for pl2303 > [ 1151.946619] p...

...tered tone zone 8 (Norway) ramchip problem is false, without the card all ok, ramtests on machine as well. lsmod shows wcusb driver on zaptel, I dont need that, can I remove it? is that a problem or not? # lsmod Module Size Used by Not tainted usbserial 23964 0 (autoclean) (unused) lp 9156 0 (autoclean) parport 38848 0 (autoclean) [lp] autofs4 16984 0 (autoclean) (unused) wcusb 19552 0 (unused) wctdm...

I got a UPS Sola Basic but it is not working, I'm providing the details. I hope that someone can help me to get it working. Please let me know if there is some other information that I should provide :) OS name and version Ubuntu 12.04 $ uname -a Linux olimpo 3.8.0-29-generic #42~precise1-Ubuntu SMP Wed Aug 14 16:19:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Exact NUT version, 2.7.1

...external SD card reader. This software is suppposed to be compatible with Linux usb-storage since version 2.15... but I didn't find how to use it. If I do "lsmod | grep -i usb", I see the following: usb_storage 61193 0 scsi_mod 121293 2 sd_mod,usb_storage usbserial 25769 1 visor Anybody have experience with that software or any idea how to mount an usb-storage device? I'm running Centos 4.1. Thanks! Etienne Savard.

...verall I think the wine included with Suse 10.2 is doing a better job - ironic because I always used cxoffice because I thought it would be more refined. The only configuration problem I still have is getting the program to communicate with the Road Mate 3050T GPS. as root I did : modprobe usbserial vendor=0x120f product=0x524d afterwards dmesg produced: usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core ohci_hcd 0000:00:0c...

...docs/docs-html_one/vm1.html#AEN30 and they don't seem to work out. The order suggested is: cd zaptel make clean make linux26 make install vi Makefile (and uncomment ztdummy) make modprobe zaptel modprobe ztdummy Here are the relevent problems: gl0:/usr/src/zaptel-1.0.8 # lsmod | grep usb usbserial 34024 0 usbcore 121688 4 usbserial,ehci_hcd,uhci_hcd gl0:/usr/src/zaptel-1.0.8 # lsmod | grep z Module Size Used by gl0:/usr/src/zaptel-1.0.8 # modprobe zaptel gl0:/usr/src/zaptel-1.0.8 # modprobe ztdummy FATAL: Error inserting ztdummy (/lib/modules/2...

...39;s and one TDM400 working in the same box. At some point during the install of second card, wcusb starts loading. I believe this is one of the TE410 Cards causing this as there is no usb enabled. Module Size Used by Not tainted audit 89880 2 (autoclean) usbserial 23420 0 (autoclean) (unused) lp 8964 0 (autoclean) parport 36832 0 (autoclean) [lp] autofs4 15832 0 (autoclean) (unused) tg3 67368 1 wcusb 19552 0 (unused) usbcore 773...

...======== Connected to Asterisk CVS-v1-0-03/19/05-19:13:43 currently running on asterisk1 (pid = 1639) Verbosity is at least 3 -- Starting simple switch on 'Zap/2-1' -- Hungup 'Zap/2-1' this is the output of lsmod lsmod Module Size Used by Not tainted usbserial 23580 0 (autoclean) (unused) parport_pc 18756 0 (autoclean) (unused) lp 8964 0 (autoclean) parport 36832 0 (autoclean) [parport_pc lp] autofs4 15928 0 (autoclean) (unused) audit 89816 3 813...