search for: usb1

...will be erased prior to burning the image to the disc. __________________ So I'd guess it would try to burn to my /dev/hdc with a blank cd-r inserted. [nate@blackbox ~/.wine/drive_c/Program Files/PowerISO]$ sudo wine C:\\Program\ Files\\PowerISO\\cdburn.exe Z:\\dev\\hdc Z:\\media\\usb1\\usarmy.daa fixme:ntdll:NtFsControlFile stub! return success - Unsupported fsctl 90018 (device=9 access=0 func=6 method=0) Error verifying ISO image Ok, so that didn't work (it terminated really quickly too). I wondered if it could burn to a file instead... I wasn't too sure about this,...

Here''s the latest USB code against the xen 3.0.0 release. Since the last posting this version updates the code to use the new 32 bit grant references and the latest GNTTABOP_map_grant_ref definition. I''ve also changed the definition of the virtual USB HCD to have a single port rather than seven ports with six unused. Domains importing multiple USB devices will get a HCD for

On Tue, 06 Jun 2017 21:53:00 +0100 Rodolfo Medina <rodolfo.medina at gmail.com> wrote: > Rowland Penny via samba <samba at lists.samba.org> writes: > > This is with my router: > > > > rowland at devstation:~$ sudo mount.cifs //192.168.0.1/USB1 /mnt/cifs > > Password for root@//192.168.0.1/USB1: <-- I just pressed 'Enter' > > rowland at devstation:~$ ls /mnt/cifs > > home PVR RunSanDiskSecureAccess_Win.exe SanDiskSecureAccess > > Same result pressing `Enter'... > > Rodolfo Your router is...

...ow in progress > Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Do not enter ANY password, just press 'Enter' when prompted for a password. You are mounting the share as a 'guest' user This is with my router: rowland at devstation:~$ sudo mount.cifs //192.168.0.1/USB1 /mnt/cifs Password for root@//192.168.0.1/USB1: <-- I just pressed 'Enter' rowland at devstation:~$ ls /mnt/cifs home PVR RunSanDiskSecureAccess_Win.exe SanDiskSecureAccess Rowland

...= 2 open("/sys/bus/usb/devices/1-1/speed", O_RDONLY) = 8 read(8, "1.5\n", 4096) = 4 open("/sys/bus/usb/devices/1-1/descriptors", O_RDONLY) = 8 read(8, "\22\1\0\2\0\0\0\10c\4\377\377\0\1\1\2\4\6", 18) = 18 open("/sys/bus/usb/devices/usb1/busnum", O_RDONLY) = 8 read(8, "1\n", 4096) = 2 open("/sys/bus/usb/devices/usb1/devnum", O_RDONLY) = 8 read(8, "1\n", 4096) = 2 open("/sys/bus/usb/devices/usb1/speed", O_RDONLY) = 8 read(8, "480\n", 4096)...

...dolfo Medina <rodolfo.medina at gmail.com> wrote: > > > >> Rowland Penny via samba <samba at lists.samba.org> writes: > >> > This is with my router: > >> > > >> > rowland at devstation:~$ sudo > >> > mount.cifs //192.168.0.1/USB1 /mnt/cifs Password for > >> > root@//192.168.0.1/USB1: <-- I just pressed 'Enter' > >> > rowland at devstation:~$ ls /mnt/cifs home PVR > >> > RunSanDiskSecureAccess_Win.exe SanDiskSecureAccess > >> > >> Same result pressing `Enter...

...hat the rules seems to be correctly loaded: udevd[452]: reading '/etc/udev/rules.d/40-xpp.rules' as rules file However, these rules do not seem to be triggered: # udevadm trigger --attr-match=idVendor=e4e4 --action add UDEV [1258155881.753357] add /devices/pci0000:00/0000:00:1a.7/usb1/1-1 (usb) UDEV_LOG=7 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-1 SUBSYSTEM=usb DEVNAME=/dev/bus/usb/001/009 DEVTYPE=usb_device DRIVER=usb DEVICE=/proc/bus/usb/001/009 PRODUCT=e4e4/1141/ffff TYPE=0/0/0 BUSNUM=001 DEVNUM=009 SEQNUM=1516 ID_VENDOR=Xorcom_LTD ID_VENDOR_ENC=Xorcom\x20LT...

...have pcifront showing as a module in the DomU and the usb shows in dmesg > as: > [ 3.167543] usbcore: registered new interface driver usbfs > [ 3.167563] usbcore: registered new interface driver hub > [ 3.167585] usbcore: registered new device driver usb > [ 3.196056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 3.196060] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 3.196064] usb usb1: Product: EHCI Host Controller > [ 3.196068] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd > [ 3.196071]...

...r [ 1.558906] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.565959] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.573220] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.573270] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X [ 1.573418] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.580669] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.587899] usb usb1: Product: xHCI Host Controller [ 1.595059] usb usb1: Manufacturer: Linux 3.13.0-32-generic xhci_hcd [ 1.602239] usb usb1: SerialNumber...

Further to my messages back in May I have at last got round to trying to get my DomU to recognise USB devices. I am using Xen 4.6 with CentOS kernel 3.18.34-20.el7.x86_64. I have to manually make the port available before creating the DomU by issuing the command: xl pci-assignable-add 00:1a.0 otherwise nothing shows in: xl pci-assignable-list I have added this to my .cfg file as per the

...s megatec_usb and blazer_usb: =========================================================== gate# /usr/local/libexec/nut/megatec_usb -DDDD -a IPPON Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '4' Checking device (0665/5161) (/dev/usb1//dev/ugen0) - VendorID: 0665 - ProductID: 5161 - Manufacturer: Cypress Semiconductor - Product: USB to Serial - Serial Number: unknown - Bus: /dev/usb1 Trying to match device Device matches DTR=1, RTS=0 Starting UPS detection process... Asking for UPS information [I]... I => FAILED [short read]...

Usage: usbversion=1|2|3 (default=0, no usb controller defined) Specifies the type of an emulated USB bus in the guest. 1 for usb1, 2 for usb2 and 3 for usb3, it is available only with upstream qemu. The old usb and usbdevice parameters cannot be used with this. Changes from v6: - now usbversion cannot be used with usb and usbdevice parameters - now default is 0 (no usb controller defined) Will be used only with usb redirecti...

More information... I have pcifront showing as a module in the DomU and the usb shows in dmesg as: [ 3.167543] usbcore: registered new interface driver usbfs [ 3.167563] usbcore: registered new interface driver hub [ 3.167585] usbcore: registered new device driver usb [ 3.196056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.196060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.196064] usb usb1: Product: EHCI Host Controller [ 3.196068] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd [ 3.196071] usb usb1: SerialNumber: 0000:00:...

On Aug 7, 2014, at 7:57 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > I have tried to plug it into every USB port (including the USB 3.0 > ones) and I still get these errors. I discovered that power cycling > the UPS will fix it for a while, and also unplugging and replugging > the USB cable will also fix it sometimes. Error -32 is EPIPE, which means that the PC

...; On Tue, 06 Jun 2017 21:53:00 +0100 > Rodolfo Medina <rodolfo.medina at gmail.com> wrote: > >> Rowland Penny via samba <samba at lists.samba.org> writes: >> > This is with my router: >> > >> > rowland at devstation:~$ sudo mount.cifs //192.168.0.1/USB1 /mnt/cifs >> > Password for root@//192.168.0.1/USB1: <-- I just pressed 'Enter' >> > rowland at devstation:~$ ls /mnt/cifs >> > home PVR RunSanDiskSecureAccess_Win.exe SanDiskSecureAccess >> >> Same result pressing `Enter'... >> >&...

...00:02:00.0: xHCI Host Controller [ 0.857638] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 0.857900] xhci_hcd 0000:02:00.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 0.859088] virtio_net virtio0 enp1s0: renamed from eth0 [ 0.860055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.860056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.860056] usb usb1: Product: xHCI Host Controller [ 0.860057] usb usb1: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd [ 0.860057] usb usb1...

...=========================== I have pcifront showing as a module in the DomU and the usb shows in dmesg as: [ 3.167543] usbcore: registered new interface driver usbfs [ 3.167563] usbcore: registered new interface driver hub [ 3.167585] usbcore: registered new device driver usb [ 3.196056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.196060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.196064] usb usb1: Product: EHCI Host Controller [ 3.196068] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd [ 3.196071] usb usb1: SerialNumber: 0000:00:...

...CI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xf7002000-0xf7002fff irq 5 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2: <SiS 5571 USB controller> mem 0xf7003000-0xf7003fff irq 12 at device 3.2 on...

...porarily unavailable Thanks, Charles [root at miko /usr/local/etc]# USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -a colo1 -DDDDD 2>&1 |more debug level is '5' usb_set_debug: Setting debugging level to 5 (on) usb_os_find_busses: Found /dev/usb0 usb_os_find_busses: Found /dev/usb1 usb_os_find_busses: can't open /dev/usb2: Permission denied usb_os_find_busses: can't open /dev/usb3: Permission denied usb_os_find_busses: can't open /dev/usb4: Permission denied usb_os_find_devices: Found /dev/ugen0 on /dev/usb1 usb_control_msg: 128 6 512 0 0xbfbfd0f8 8 1000 usb_contr...

Hi, I recently purchased a new Easton 5E UPS. I plugged the USB cable into my computer so I could use the NUT UPS tools. However every so often NUT fails to connect to the device after a boot. Looking at dmesg I see errors like this: [ 3.277075] usb 1-9: new low-speed USB device number 6 using xhci_hcd [ 3.302091] usb 1-9: device descriptor read/8, error -32 [ 3.430241] usb 1-9: device