search for: upsstate

I'll test it. I'm a bit confused with cgi-bin. I have made a lot of hosts.conf copies and didn't understand where does upsstats trying to find hosts.conf # ps -aux | grep ups _ups 13934 0.0 0.0 484 920 ?? Ss 5:41PM 0:01.53 /usr/local/bin/riello_ser -a senpro _ups 9171 0.0 0.1 532 1168 ?? Ss 5:41PM 0:00.13 /usr/local/sbin/upsd _ups 16906 0.0 0.1

Hello Jeff, `upsstats` by itself only relays and renders the information provided by a NUT data server (upsd) and the NUT driver for the device. So you can revise the specific reported values with e.g. `upsc` command-line client to be sure. What I think happens here is that the driver uses a `battery.voltage.low/nominal/high` group of readings which does not match the hardware circumstances

Hello, I am using Nut 2.8.0 (2.8.0-7 packages) Debian 'Bookworm' in it's Devuan form 'Daedalus'. When I look at my Eaton (ex-MGE Powerware) E5115 UPS boxes in NUT 'upsstats" I am confused by the battery readings. Under the 'System' column I can click on the link and obtain a GUI with a few meters. The NUT 'upsstats' battery voltage meter for these

I'd like to have the UPS status web page automatically refreshed. I've found a reference to using @REFRESH@ in the upsstats.html page, but as far as I can tell in looking at the code, somewhere I need to provide a value to the refreshdelay variable, and I see no way to do that other than changing the source code. I'm using nut 2.2.

For some reason I?m no longer able to access the upsstats.cgi (http://192.168.123.49/cgi-bin/nut/upsstats.cgi) I get the error: Error: no hosts to monitor (check hosts.conf) When Apache starts is complains about not finding the fully qualified domain name. In the past, upsstats.cgi would just load. I didn?t have to do any Apache2 configuration. I don?t know what has changed. I?ve build NUT

The attached patch is a first stab at adding 3phase support to upsstats/upsimage. I got a little carried away, so bare with me. This patch adds 3phase awareness to upsstats/upsimage and the template files, and in additional to the obvious 3phase variables: - upsstats: * Adds IF/ELSE-awareness, and since the parser logic is rather limited this means that we now have IF, ELSE IF etc since all

On Jul 31, 2013, at 3:36 AM, Pavel Potcheptsov (EKTOS) wrote: > Does it looks good? I think so - 40.8 volts with a nominal of 36 volts is 13.6 V/cell, which agrees with the 100% charge value. Hopefully the line voltages and frequency make sense for your region. > Another question what does riello experimental driver warning mean? We add that to all new drivers. This driver was written by

Dan Grostick via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> writes: > When Apache starts is complains about not finding the fully qualified domain name. That seems normal > In the past, upsstats.cgi would just load. I didn?t have to do any Apache2 configuration. I don?t know what has changed. in general this does need configuration. read the apache config file. read the

Hi, I'm using the CGI program upsstats.cgi to view the status of UPS's on a web browser. I'd want to do something like that: /var/www/nut-cgi-bin-group-A/upsstats.cgi /var/www/nut-cgi-bin-group-B/upsstats.cgi /var/www/nut-cgi-bin-group-C/upsstats.cgi In that way using .htaccess I allow only certains IPs access to UPS from group A. How could I do that? Thanks in advance" --

Not fully true about example configs in docs: man pages for CGI bits have some :) https://github.com/networkupstools/nut/blob/master/docs/man/upsset.conf.txt https://github.com/networkupstools/nut/blob/master/docs/man/upsstats.cgi.txt https://github.com/networkupstools/nut/blob/master/docs/man/hosts.conf.txt etc. Other than that, check permissions - e.g. OTOH if Apache user may read your

Hey guys, New user to NUT and was playing with the upsstats.cgi. On my website, I have everything going through a wrapper script that frames the pages. So my web files are actually truncated since the wrapper installs all my headers for me. When using the upsstats.cgi, it works fine embedding it into my pages and then editing the .html template EXCEPT, I can't get rid of: Content-type:

Thank you very much!! I have tried configure downloaded source with # ./configure --with-user=_ups --with-group=_ups --with-statepath=/var/db/nut/ and then build driver and copy again. but this doesn't help (driver pid still in the /var/state/ups). Maybe I must add more arguments to change driver's pid location, but I did next, I changed this argument in openbsd ports: # pkg_delete nut #

Hello all, I have succefully configure a trust 1200v ups with nut-2.2.2 on an ubuntu 6.06 LTS by follow this instructions : http://www.networkupstools.org/doc/2.2.0/INSTALL.html I have the nut-cgi 2.0.3-4 from the ubuntu repos installed Now, I have problems to configure the nut-cgi in my web browser and I have this when i tried to http://localhost/cgi-bin/nut/upsstats.cgi. Error: can't

I seem to have NUT all working with my R3000XR, except for the CGIs. The webserver's all properly configured and upsstats.cgi *runs*, but doesn't yield any useful output - no values are displayed, every value is replaced by [error: Invalid argument]. Apache is not logging any resulting errors, and there doesn't seem to be a lot of useful documentation on the CGIs to troubleshoot

The (2.2.1) upshid-ups driver reports battery.temperature rather than ups.temperature. Here's a quick patch to have it show up in the status page... --- clients/upsstats.c.DIST 2008-03-04 09:15:40.000000000 +0000 +++ clients/upsstats.c 2008-03-04 09:16:20.000000000 +0000 @@ -787,6 +787,11 @@ return 1; } + if (!strcmp(cmd, "BATTTEMP")) { +

Hello Is there any way to set and consume user defined variables in upsstats.html I would like to set lower thresholds for temperature than are set in the UPSes for my web page but I cannot figure out how to pass a value that is not a variable into IFBETWEEN. Is there a way to say: @IFBETWEEN 15 25 ambient.temperature@ <td BGCOLOR="#00FF00"> @ELSE@ <td

Hi, I want to use nut-cgi from a centralized machine. There are two firewalls which run upsmon. upsmon connected to the real upsd which run two machines behind the firewall. So upsmon is using LAN for communicating to upsd. First problem: I can't connect to upsmon with upsstats.cgi because upsmon not listen on TCP port. Second problem: How can I check more upsd with upsmon? All upsd are

I have installed NUT Server and everything went fine. Now when I try to run dradmin at raspberrypi:/etc/nut $ http://localhost/cgi-bin/nut/upsstats.cgi I get the following error dradmin at raspberrypi:/etc/nut $ http://localhost/cgi-bin/nut/upsstats.cgi I am trying to run this on a local host. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Adam: Thanks for putting up this page. But something is wrong. In particular, our Powerware 9135 is a three phase UPS system with THREE 480 volt outputs. So the displayed voltage is not correct -- in fact there should really be THREE voltages displayed, all around 480v. Nut developers: I am copying the NUT mailing list to see if anyone can suggest how to fix this. NUT developers, see the

Shamelessly reusing the announcement Arnaud sent about three months ago for nut-2.2.1: "We're preparing to release 2.2.1-pre2, so if you have some fixes to backport on Testing, consider announcing it and doing asap. As always, compatibilities update and bugfixes only!" Regards, Arjen -- Eindhoven - The Netherlands Key fingerprint - 66 4E 03 2C 9D B5 CB 9B 7A FE 7E C1