search for: untoward

...'ve been fiddling around with Samba4, using the (pretty nifty) howto at wiki.samba.org. I've followed it through and provisioned the active directory, I've run all the tests and everything seems good. Kerberos responds as it should, dynamic DNS seems to be doing its thing (nothing untoward shows up with samba_dnsupdate --verbose) and the system times are within a couple of seconds of eachother, so as far as I can tell, I'm not doing anything wrong. I have a pastebin showing what output I get from windows, plus the diagnostics I've been able to think of here -> http://...

...screen it was blank, machine was unresponsive to the keyboard, over the network ssh and other daemons didn't respond but the thing has two network cards and routing from one to the other was still working. So the kernel was up and I suspected a dying disk. But smartctl -a revealed nothing untoward. Didn't see anything significant in the log files at the time. Logging had stopped when the machine hung. The machine rebooted normally and has run for almost a week and hung again with the same symptoms. Again rebooted, nothing untoward in the logs and smartctl still OK. But shortly after...

Asterisk 1.2, Fedora Core 4: When I leave a voicemail message, it writes the necessary files to the INBOX: msg0000.gsm msg0000.txt msg0000.wav msg0000.WAV When I hang up, the files are erased. There is no indication of anything untoward in the logs: -- x=0, open writing: [...]/INBOX/msg0000 format: wav49, 0x99ce778 -- x=1, open writing: [...]/INBOX/msg0000 format: gsm, 0x99bed98 -- x=2, open writing: [...]/INBOX/msg0000 format: wav, 0x99cf5f0 -- User hung up -- Hungup 'IAX2/phil-4' Is it possi...

...han the 30s QEMU_JOB_WAIT_TIME and so libvirt then most unhelpfully kills the barely spawned guest. Dan said there was currently no workaround available so I'm now looking at building a custom libvirt which sets QEMU_JOB_WAIT_TIME=60s. I have two related questions: 1) will this change have any untoward side-effects? 2) if not, then is there any reason not to change it in master until a better solution comes along (or possibly better, alter qemuDomainObjBeginJobInternal to give a domain start job a little longer compared to other jobs)? -- Cheers, ~Blairo

...t Samba is caching the > username, uidNumber & gidNumber, but none of the other rfc2307 > attributes, so when the network is disconnected, the 'missing' rfc2307 > attributes cannot be found, even though winbind tries, so it just > 'hangs'. But there would be nothing untoward about adding a few more RFC2307 attributes to what winbindd caches (specifically those that would give nss_winbind all the information necessary to construct a full passwd line), would there? Would the Samba team be receptive to such a patch? - John

I'm puzzled... I'm running the Debian package of Dovecot 0.99.10.4 on a Debian (testing) server, and it's basically doing nothing on startup for an extended period. After a while (maybe 10 minutes or more) it all suddenly starts working, all without logging anything untoward. All the dovecot processes appear to start OK, and 'Dovecot starting up' is logged to the syslog. If you telnet to an IMAP or POP3 port at this point, it will successfully connect but there's no response (i.e. no '* OK dovecot ready'). Nothing else on this server is failing i...

...__kmem_cache_alloc | followed by | e1000_alloc_rx_buffers | e1000_alloc_rx_irq | | might put some light onto it. | dont suppose you know where RH writes panics | to? i cant seem to find it. The kernel should log the oops in /var/log/messages. | when i look at the samba.log there is nothing untoward | | [2003/12/15 11:29:06, 1] smbd/service.c:make_connection(636) | m6-1 (172.16.175.10) connect to service dmn01 as user dmn01 (uid=1269, | gid=102) (pid 18746) | [2003/12/15 11:29:07, 0] lib/util_sock.c:read_data(436) | read_data: read failure for 4. Error = Connection reset by peer | [2003/12...

Dear R-list In R 2.1.1 under Win XP on a P4 with 2GB Ram when typing > temp<-matrix(c(1:16000000),4000,4000) > write(file="temp.txt", temp) > scan("temp.txt") I receive: Error in scan("temp.txt") : scan() expected 'a real', received '414851' The motivation for evoquing this meassage is that I am getting the same meassage with exported

...ot;. quantifiably, some of the batch (rendering, in this case) jobs that are running on the windows machines are going much more slowly than expected--factor of 2-5x slower than usual is a real killer when "usual" is 12 hours. after checking on the machines and the server, i see nothing untoward chewing up the CPU on either side--on the server, there are as many smbd's as clients and they are splitting the CPU's evenly (server is a 16-core machine with 32G of ram and a big hardware raid hanging off 2 high-end areca cards). the server sits at a load average of about 2 when all the...

again, some fairly trivial(?) questions about working with centos 7.4, given my time immersed in fedora so i want to make sure i'm not carrying over any bad habits. first, is there anything untoward in updating an installed version of centos 7.4 with a simple "yum update"? i'm well aware of keeping in mind the goal of stability with centos, so am unsure what the philosophy is of pulling in new updates as cavalierly as i do with fedora. currently, "yum list updates" show...

...axtor and I very recently added an 80 gig Seagate to the second IDE bus. There is also a CDROM sharing the primary IDE bus with the main drive. Up until quite recently the machine has had a single drive in it and been performing flawlessly, no disk problems or anything of that nature (nothing untoward in messages, not spontaneous reboots, etc.). I have performed a few CVSups and make worlds over the last month to deal with security issues and such and about two weeks ago I added the second Seagate drive to the system. Shortly after adding the new drive (but also around the time of a CVSup)...

...The answers are consistent in the sense that I always get the same answers from running the same command in the console. I have tried inspecting the returned objects to see if the objects are somehow of a different class than I expect, or are just being printed oddly, but have not found anything untoward. Any suggestions would be much appreciated! Regards, Robin # THESE COMMANDS GIVE ONE ANSWER # [the correct answer always begins with 1, the incorrect with -1] > .C("oneMargin", c(1L,1L,1L,1L,1L), c(1L,1L,1L,1L,1L), 1L, c(2L,2L,2L,2L,2L), 5L, ptr1, ptr2)[[7]] [1] 1 -1 -1 1 -1 1...

...uter. This is where I'm stumped... how can I use LLVM inside my "simplified processing node," allowing it only access to my "virtual devices," getting it to run "as fast as possible" with as little possibility of it clobbering the host computer should something untoward happen to the LLVM code? I'm still sifting through the documentation and feel like I'm 90% there to understanding out LLVM works as a Virtual Machine, and not a Compiler backend or Intermediate Language. Or, if LLVM isn't my "perfect match," where should I look? --...

...9;'m running a 2-instance Mongrel cluster behind Apache 2.2.4 with Rails 1.2.3. If no requests are received by the application for several hours (this usually happens overnight) then Mongrel stops responding and no requests are detected by Rails (at least nothing is in the Rails log). Nothing untoward is in the Mongrel log. If you try and visit the application, the request times out with a 502 Proxy Error. Apache is still up and running and serving static files without a problem, but the following is present in the Apache error log (from trying to hit the SessionController, identified by / ses...

I''m in well over my head with this report from zpool status saying: root # zpool status z3 pool: z3 state: DEGRADED status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: http://www.sun.com/msg/ZFS-8000-8A

...9;'m running a 2-instance Mongrel cluster behind Apache 2.2.4 with Rails 1.2.3. If no requests are received by the application for several hours (this usually happens overnight) then Mongrel stops responding and no requests are detected by Rails (at least nothing is in the Rails log). Nothing untoward is in the Mongrel log. If you try and visit the application, the request times out with a 502 Proxy Error. Apache is still up and running and serving static files without a problem, but the following is present in the Apache error log (from trying to hit the SessionController, identified by / ses...

...> and so libvirt then most unhelpfully kills the barely spawned guest. Dan > said there was currently no workaround available so I'm now looking at > building a custom libvirt which sets QEMU_JOB_WAIT_TIME=60s. > > I have two related questions: > 1) will this change have any untoward side-effects? > 2) if not, then is there any reason not to change it in master until a > better solution comes along (or possibly better, alter > qemuDomainObjBeginJobInternal > to give a domain start job a little longer compared to other jobs)? What is the actual error you're gett...

On Sun, 1 Dec 2024 08:05:15 -0500 "John R. Graham via samba" <samba at lists.samba.org> wrote: > On 11/29/24 12:04, Marco Gaiarin via samba wrote: > > Mandi! John R. Graham via samba > > In chel di` si favelave... > > > >> When I put winbindd in offline mode, > > RFC2307? A known bug: > > > >

Due to a glitch with the CVS version management software (quite likely my own fault), R-0.62.0 got shipped without the "tests" directory. Apart from preventing "make tests" from working, it also has untoward consequences for "make clean" and the like. So there's an updated version in R-0.62.1.tgz in the usual places. For good measure, there's also a patch file. -- O__ ---- Peter Dalgaard Blegdamsvej 3 c/ /'_ --- Dept. of Biostatistics 2200 Cph. N (*...

A non-text attachment was scrubbed... Name: not available Type: text Size: 645 bytes Desc: not available Url : https://stat.ethz.ch/pipermail/r-help/attachments/19980424/94b87a18/attachment.pl