search for: ums0

...p PC from FreeBSD 7.0R to 7-STABLE. After that, the scroll wheel of my Intellimouse Explorer 4.0 (USB wired) stopped working. I searched relevant information and found kern/123224 "[ums] Scroll wheel breakage w/ USB MS Wireless Intellimouse Explorer 2.0". The symptom is quite similar. ums0: <Microsoft Microsoft IntelliMouse Explorer, class 0/0, rev 2.00/4.24, addr 2> on uhub0 ums0: 5 buttons and a TILT dir. Note that there is no "Z dir" detected. No one care about that? It is hard for me to live without the mouse wheel nowadays.... I tried another mouse and Z dir...

...se I told it to use moused and then had XFree do the wheel translation with the ZAxisMapping option. After looking at the FAQ again I decided to try doing the translation with moused on my new 5.1-R desktop box. So I did a ps ax | grep moused and got what I expected... /usr/sbin/moused -p /dev/ums0 -I /var/run/moused.ums0.pid so as root I killed it and ran it with the same options plus "-z 4" just like the FAQ said. I changed xfree's config file to suit and started up X. Everything worked great so I added "-z 4" to moused_flags in /etc/rc.conf and moved on to more...

<message resent - email address not valid, I apalogize if you received it twice> I have the same problem than Volker Stolz a month ago! If I boot with the hub attached, it stops at : ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem0xdf000000-0xdf000fff irq 9 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <AcerLabs M5237 (Aladdin-V) USB

...ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff pnpid ORM0000 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: <HP Virtual Management Device, class 0/0, rev 1.10/0.01, addr 2> on uhub0 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 Timecounters tick every 1.000 msec acd0: CDROM <TSSTcorpCD-ROM TS-L162C/N204> at ata0-master UDMA33 da0 at ciss0 bus 0 target 0 lun 0 da0:...

...c0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: <Logitech USB Receiver, class 0/0, rev 1.10/25.00, addr 2> on uhub0 ums0: 16 buttons and Z dir. Timecounter "TSC" frequency 1788943467 Hz quality 800 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ad0: 95396MB...

...rqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 2> on uhub0 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 1694512861 Hz quality 800 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ad...

...n500304800182f4fd/type at 0/slot at 6/elmdesc at Slot_06/gptid/faa2b1ca-a997-11e1-83eb-00259061b51a - path too long Root mount waiting for: usbus1 usbus0 uhub2: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen0.3: <Winbond Electronics Corp> at usbus0 ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 kbd2 at ukbd0 Trying to mount root from...

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

...hci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xb800-0xb81f irq 10 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: B16_b_02 USB-PS/2 Optical Mouse, rev 2.00/98.02, addr 2, iclass 3/1 ums0: 7 buttons and Z dir. uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xb000-0xb01f irq 3 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Int...

...: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhub5: Chicony Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub5: 3 ports with 2 removable, bus powered ukbd0: Chicony PFU-65 USB Keyboard, rev 1.10/1.00, addr 3, iclass 3/1 kbd2 at ukbd0 ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0: 5 buttons and Z dir. Timecounters tick every 1.000 msec acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata0-master UDMA33 ad4: 286168MB <Seagate ST3300622AS 3.AAE> at ata2-master SATA150 ad6: 286...

...uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 ugen0.2: <American Power Conversion> at usbus0 ugen0.3: <vendor 0x0461> at usbus0 ums0: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 3> on usbus0 ugen0.4: <Dell> at usbus0 ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 4> on usbus0 Ace /usr/ports # usbdevs -d -v usbdevs: no USB controllers found Ace /usr/ports # usbconfig ugen...

...product 0x0000(0x0000), vendor 0x0000(0x0000), rev 1.00 uhub0 port 1 addr 2: low speed, self powered, config 1, product 0x0002(0x0002), vendor 0x051d(0x051d), rev 0.06 ugen0 port 2 addr 3: low speed, power 100 mA, config 1, product 0x0201(0x0201), vendor 0x062a(0x062a), rev 1.00 ukbd0 ums0 Controller /dev/usb1: ... --------------------------------------- But NUT cannot connect to him: --------------------------------------- # USB_DEBUG=2 /usr/local/libexec/nut/usbhid-ups -a ups1 -u root -DDD Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 debug lev...

...t;Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xef80-0xef9f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 fxp0: <Intel Pro/100 Ethernet> port 0xdf40-0xdf7f mem 0xfceff000-0xfcefffff irq 11 at de...

...0: 2 ports with 2 removable, self powered bce0: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x00000006) bce1: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x00000006) ugen0.2: <HP> at usbus0 ukbd0: <Virtual Keyboard> on usbus0 kbd2 at ukbd0 ums0: <Virtual Mouse> on usbus0 ums0: 3 buttons and [XY] coordinates ID=0 uhub3: 4 ports with 4 removable, self powered ugen3.2: <vendor 0x04b4> at usbus3 uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus3 uhub4: MTT enabled (probe0:ciss0:0:0:0): REPORT L...

...sb0 usb1 usb2 usb3: <Intel 63XXESB USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered umass0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on uhub3 ums0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on uhub3 ums0: X report 0x0022 not supported device_attach: ums0 attach returned 6 pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib11 vgapci0: <VGA-compatible display> port 0x3000...

I just updated to RELENG_7 from 6.2 and I'm running into some really annoying issues with jerky mouse movement and skipping sound. This seems to be similar to: Re: SCHED_4BSD in RELENG_7 disturbs workflow This happens both with 4BSD and ULE. I seems to happen when I'm compiling ports and a new cc/bzip2/sh process fires off (I'm just watching top), I'll get the skip/freezeup.

..., rev 2.00/0.00, addr 2> on uhub4 uhub5: multiple transaction translators uhub5: 2 ports with 2 removable, self powered ehci_device_intr_done: not done, ex=0xc699e800 ukbd0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub5 ehci_device_intr_done: not done, ex=0xc699e000 kbd2 at ukbd0 ums0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub5 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 umass0: <DELL INC. DRAC5 VIRTUAL MEDIA, class 0/0, rev 2.00/0.00, addr 4> on uhub5 umass1: <DELL INC. DRAC5 VIRTUAL MEDIA, class 0/0, rev 2.00/0.00,...

...lt;vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 Root mount waiting for: usbus1 usbus0 uhub2: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.3: <Winbond Electronics Corp> at usbus0 ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 kbd2 at ukbd0 kbd2: ukbd0, generic (0), co...

Hi, Did anyone else experience this? With 9.1-BETA1 the boot process freezes, among the last lines with verbose boot are acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times after this, dead. What is supposed to happen in the next stage? This laptop worked fine with 9-STABLE to at least february. //per

...: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhub5: Chicony Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub5: 3 ports with 2 removable, bus powered ukbd0: Chicony PFU-65 USB Keyboard, rev 1.10/1.00, addr 3, iclass 3/1 kbd2 at ukbd0 ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0: 5 buttons and Z dir. Timecounters tick every 1.000 msec acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata0-master UDMA33 ad4: 286168MB <Seagate ST3300622AS 3.AAE> at ata2-master SATA150 ad6: 286...