search for: ultradma

...en booting to MSDOS on harddisk, only Isolinux --> A: and Isolinux --> Memdisk --> Disk image Bernd http://fdos.org/ripcord/beta9sr1/other/misc/Udma2_16.zip output on screen (sourcecode in UDMA2.ASM, line 855 and 736 ??? ) UDMA2 Disk Driver V1.6, 2-Dec-2004. Output overlap is disabled. UltraDMA controller found at I-O address 1050h. Vendor/Device I.D. 8086h/7111h. PCI bus 00h, device 07h, function 1 No XMS manager; using only DMA I-O, NO Output Overlap! Primary-master disk is VMware Virtual IDE Hard Drive. Set to UltraDMA mode2, ATA-33. Read tests omitted BIOS EDD error; driver N...

...--Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP damocles 1G 24301 63 25047 11 13182 8 29843 85 30678 12 185.1 1 There is a big diference, 7MB/s connected in the promise and 24MB/s in the 686 and using UltraDMA-100 in both cases. Transfers between ATA devices are even worse, certain combinations give me transfer rates as low as 1MB/s :-? I tried with other disks/ata cables and the results where identical. If I boot GNU/Linux in the same machine all disks work as expected in the promise controller, so thi...

...n DIMM, support max. 4GB DDR2 800/667/533 ECC and non-ECC,un-buffered memory VGA - Integrated GeForce 6100 GPU - High Definition Video Processing with max. resolutions to 1920 x 1440 Expansion Slots - 1 x PCI Express x16 - 1 x PCI Express x1 - 2 x PCI Storage/RAID - NVIDIA MCP61P - 1 x UltraDMA 133/100/66/33 - *4 x Serial ATA 3Gb/s with RAID 0, RAID 1, RAID 0+1, RAID 5 & JBOD NVIDIA MediaShield? RAID 0, 1, 0+1, 5 and JBOD span cross Serial ATA drives LAN - NVIDIA MCP61P built-in Gigabit MAC with external Attansic PHY Audio - ADI AD1986A High Difinition Audio 5.1channel CODEC...

...means in this context, maybe my buddy dmesg does. # dmesg | tail Nov 1 03:28:02 maou scsi: [ID 193665 kern.info] sd2 at adp0: target 2 lun 0 Nov 1 03:28:02 maou genunix: [ID 936769 kern.info] sd2 is /pci at 0,0/pci9004, 7178 at b/sd at 2,0 Nov 1 03:28:06 maou genunix: [ID 773945 kern.info] UltraDMA mode 2 selected Nov 1 03:28:31 maou last message repeated 7 times Nov 1 03:28:52 maou genunix: [ID 408114 kern.info] /pci at 0,0/pci9004,7178 at b/sd at 4,0 (sd4) offline Nov 1 03:28:55 maou genunix: [ID 773945 kern.info] UltraDMA mode 2 selected Nov 1 03:28:55 maou last message repeated 3...

We run several RH7.2/7.3 servers & recently 2 of them, although still working fine, have started to show kjournald as generally using over 50% cpu% on 'top' - virtually continuously. Free cpu% generally less than 25% now! Both machines are also using software RAID5 EIDE ....... otherwise are standard server installs. Any info on what kjournald is & why it should have recently

Hi, I have installed b_78 on a Dell 2950 and booting to bare metal works fine but when I try to boot using the grub entry Solaris xVM it will boot to the point where it displays the uname info and then just stays there. It will not boot past that point. I have enabled VT technology in the BIOS (but only after the installation). Where/what can I look at to trouble shoot this? I am new to xen and

...idia255 is /pseudo/nvi dia at 255 Apr 27 09:30:08 weston npe: [ID 236367 kern.notice] PCI Express-device: pci8086, 244e at 1e, pci_pci0 Apr 27 09:30:08 weston genunix: [ID 936769 kern.notice] pci_pci0 is /pci at 0,0/pci 8086,244e at 1e Apr 27 09:30:08 weston genunix: [ID 773945 kern.notice] UltraDMA mode 2 selected Apr 27 09:30:08 weston last message repeated 1 time Apr 27 09:30:08 weston pcplusmp: [ID 444295 kern.info] pcplusmp: pciex8086,1096 (e1000g) instance #1 vector 0x31 ioapic 0xff intin 0xff is bound to cpu 0 Apr 27 09:30:08 weston genunix: [ID 773945 kern.notice] UltraDMA mode...

[This email is either empty or too large to be displayed at this time]

In my haste for help, I stupidly hit reply and changed the subject which I thought was enough for a new message, not giving much thought for the threading, etc. So apologies for the hijack, although I would think it fairly obvious that it wasn't deliberate or obvious to me... or a big deal really. My mail doesn't thread. Some further info for those actually interested in helping, I forgot

...077 kern.info] ATA/ATAPI-7 supported, majver 0xfe minver 0x0 Jan 17 06:41:30 san npe: [ID 236367 kern.info] PCI Express-device: ide at 0, ata0 Jan 17 06:41:30 san genunix: [ID 936769 kern.info] ata0 is /pci at 0,0/pci-ide at 4/ide at 0 Jan 17 06:41:30 san genunix: [ID 773945 kern.info] UltraDMA mode 2 selected Jan 17 06:41:30 san last message repeated 2 times Jan 17 06:41:30 san scsi: [ID 193665 kern.info] sd3 at ata0: target 0 lun 0 Jan 17 06:41:30 san genunix: [ID 936769 kern.info] sd3 is /pci at 0,0/pci-ide at 4/ide at 0/sd at 0,0 Jan 17 06:41:30 san genunix: [ID 314293 kern.info] de...