search for: ultra320

Did anyone manage to have xen (3.0.1 stable) run on this config? (this is on FC4 if it matters). I''ve tried recompiling the xen0 kernel with the Fusion options from my current kernel added, but it keeps removing some of them (maybe some that didn''t exist yet in kernel 2.6.12), and it seems I end up without the correct driver. If someone has this running, I''d be

I know this is a long shot, but does anyone have any familiarity with this server? It uses the Super X6DH8-G2 motherboard. Currently, we've added an Adaptec 2120S Ultra320 RAID PCI Controller Card to get RAID 5 capability. The installation bombs and from what I can tell it looks like we're getting SCSI resets or the controller is going offline maybe. Any ideas would be greatly appreciated. -- <<JAV>>

...0 is supposed to be known to work with *. I'm going to get a price quote on the following setup: HP ProLiant DL380 G4 Server w/ the following options: Intel Xeon 3.20GHz/1MB 2GB REG PC2-3200 (2 X 1GB) HP ProLiant Battery Backed Write Cache Enabler for SA6i RAID 1 drive set HP 36.4GB Pluggable Ultra320 SCSI 15,000 rpm (1") Universal Hard Drive HP 36.4GB Pluggable Ultra320 SCSI 15,000 rpm (1") Universal Hard Drive Hot Plug Redundant Power Supply Module HP Redundant Fan Option Kit (3 fans) 1.44MB Floppy Disk Drive Slimline 24X CD-ROM Can anyone comment any further on this system? Do you...

I have an Adaptec 392320 Ultra320 SCSI adapter. I am running x86_64 SLES9 SP3. When I build x86_64 Xen with just the 2.6-xen kernel + initrd, I am getting the following error on the module load. But if I go back to building separate xenU and xen0 kernels without initrd the device works without any issues. Any idea what is going w...

...that if I use the Digium product THREE Digium Wildcard TE412Ps? (Quad E1 Card) how many calls can I handle simultaneously. I want to use the cards with the following Configurations: Intel? Xeon? 3.00GHz/800MHz, 2M Processor 1GB PC2-3200 DDR2 SDRAM (2x512MB + 2X1GB) memory Integrated Dual Channel Ultra320 SCSI Adapter NC7781 Single Port PCI-X embedded NIC Hot plug drive cage - Ultra3 (6X1") High Speed IDE CD-ROM Drive 72.8GB Pluggable Ultra320 SCSI 15,000 rpm (1") Universal Hard Drive Asterisk Business Edition 3 X TE412P I have a requirement of handling 350 Calls using a single Server...

Hey guys, I'm looking for some realworld specs on somebodys machine that will work with the Digium 4-port T1/PRI card and that will support 96 simultaneous calls. Dell is soon to release the PowerEdge 1850: 2U, Dual 3.6Ghz Xenon, 1Gb DDR2 RAM, Dual 36GB Ultra320 SCSI RAID, Hot swap Powersupply, one 64bit 133Mhz PCI and one 64bit 100Mhz PCI for about $3,000. Tack on a 4 port Digium card and you have a Cisco AS5300 that can do FAR MORE for $15,000 less. I just need to know if this machine can support 96 simul calls in all kinds of configurations: Ex 1: 48...

...is recognized ok and then we get a failure later on in the boot sequence (and then the device disappears). RedHat Linux is in the compatibility list for that Adaptec card, and the card is listed as compatible with the Promise VTrak. We were able to get this combination to work by giving up on the Ultra320 setting and dropping back to 160 in the controller setup, but if anyone has suggestions or info it would be appreciated. Here's the dmesg output: sd 2:0:0:0: Attempting to queue an ABORT message:CDB: 0x1a 0x0 0x5c 0x0 0x40 0x0 scsi2: At time of recovery, card was not paused >>>>&g...

We are implementing a ZFS storage server (NAS) to replace a NetApp box. I have a Sun server with two dual Ultra320 PCIX cards connected to 4 shelves of 12 500GB disks each, yielding a total of 24TB of raw storage. I''m kicking around the different ways to carve this space up, balancing storage space with data integrity. The layout that I have come to think is the best for me is to create a raidz2 pool...

My application always needs to sync file data after writing. I don't want anything handing around in the kernel buffers. I am wondering what is the best method to accomplish this. 1. Do I use EXT2 and use fdatasync() or fsync()? 2. Do I use EXT2 and mount with the "sync" option? 3. Do I use EXT2 and use the O_DIRECT flag on open()? 4. Do I use EXT3 in full journaled mode,

We are preparing for a new file server (Dell 2970) with an external disk array with integrated RAID (raidking.com). The array presents via Ultra 320 SCSI. We are looking for anyone that has had experience or opinions on SCSI cards without RAID that have a good performance working under CentOS 5.x. Any suggestions/comments on the controllers with large storage especially at or above 2tb would be

...0 Aug 3 13:21 sg dr-xr-xr-x 2 root root 0 Aug 3 13:21 usb-storage [root at hcnas scsi]# cd aic79xx/ [root at hcnas aic79xx]# ll total 0 -rw-r--r-- 1 root root 0 Aug 3 13:09 1 -rw-r--r-- 1 root root 0 Aug 3 13:09 2 [root at hcnas aic79xx]# cat 1 Adaptec AIC79xx driver version: 3.0 Adaptec 39320A Ultra320 SCSI adapter aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs Allocated SCBs: 4, SG List Length: 128 Serial EEPROM: 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x09f4 0x0142 0x2807 0x0010 0xffff 0xffff 0xfff...

...why this is happening and how I can make it go away? Thanks, Aravindh Puthiyaparambil Xen Development Team Unisys, Tredyffrin PA ACPI: PCI Interrupt 0000:03:0d.0[A] -> GSI 49 (level, low) -> IRQ 18 scsi2 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 <Adaptec (Dell OEM) 39320 Ultra320 SCSI adapter> aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs Vendor: SEAGATE Model: ST373207LW Rev: D702 Type: Direct-Access ANSI SCSI revision: 03 target2:0:0: asynchronous scsi2:A:0:0: Tagged Queuing enabled. Depth 32 targ...

I have a Supermicro SuperServer 6013P-8 system which features a X5DPR-8G2 motherboard with embedded Adaptec AIC-7902 dual-Ultra320 SCSI controller. Said system boots and runs fine with 4.8-RELEASE (with a slight cosmetic problem during boot that can be cured by building a kernel without eisa support). With STABLE (as of 19 June) the system locks up hard (no response to the keboard) during the boot. The last messages to appe...

I have a question regarding the building of the unified xen kernel (linux-2.6-xen) and the use of initrd. In the past I built both xen0 and xenU kernels; the xen0 default configurations had SCSI and Fusion MPT support compiled into the kernel. Now, they are built as modules. The problem is that I am unable to boot the xen kernel built that way, even though I am building an initrd. I have

...river attached) pci0: <base peripheral> at device 1.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0x20ff mem 0xdd200000-0xdd201fff irq 32 at device 2.0 on pci2 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2c00-0x2cff,0x2800-0x28ff mem 0xdd202000-0xdd203fff irq 33 at d...

...onths with no success. However, on my current attempt, the original hardware no longer boots, so I''m trying to resolve the issues with xen properly, or else take a long holiday... Anyway, the physical machine had a 9G drive (OS drive), a 147 G drive (not in use) and a 300G drive (all SCSI Ultra320 on the same SCSI controller) Everytime, I''ve booted linux, used dd to image the original 2 drives (ignored the 147G drive), and written each image with dd to an LV This is exported by iscsi to xen The c: works fine, and I can boot properly in VGA mode (safe mode) but the 300G drive alwa...

So yesterday I got was able to get a domU successfully using a PCI SCSI card. This morning I restarted the host server. When I try to start up the same domU I get this error: Error: pci: improper device assignment specified: pci: 0000:0e:04.0 must be co-assigned to the same guest with 0000:0e:04.0, but it is not owned by pciback. How do I make this card owned by pciback on reboot. Do I need to

...pci2 em1: Speed:N/A Duplex:N/A pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1 IOAPIC #1 intpin 4 -> irq 18 IOAPIC #1 intpin 5 -> irq 19 pci3: <PCI bus> on pcib3 ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x44ff mem 0xfc300000-0xfc301fff irq 18 at device 2.0 on pci3 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xfc302000-0xfc303fff irq 19 at d...

...Message-ID: <1101836449.2321.131.camel@guru.puzzled.xs4all.nl> > Content-Type: text/plain > > On Tue, 2004-11-30 at 10:18 -0700, Kevin P. Fleming wrote: >>> Dell is soon to release the PowerEdge 1850: 2U, Dual 3.6Ghz Xenon, >>> 1Gb DDR2 >>> RAM, Dual 36GB Ultra320 SCSI RAID, Hot swap Powersupply, one 64bit >>> 133Mhz >>> PCI and one 64bit 100Mhz PCI for about $3,000. > [snip] > > If space is at a premium (and you only need 1 PCI slot) have a look at > this one: > http://www.supermicro.com/products/system/1U/6014/SYS-6014P-8R...

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about