search for: uhub0

...ago! If I boot with the hub attached, it stops at : ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem0xdf000000-0xdf000fff irq 9 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered If I boot w/o the hub, the boot completes and I can replug the USB HUB which is working fine (but the scsibus number change, I have also SCSI cards). uhub1: Texas Instruments TUSB2046 hub, clas...

Hello all! I've been trying to get my UPS working with my OpenBSD stable box and I haven't had any luck yet. dmesg shows that I have something from Powerware usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 biomask f5fd netmask fffd ttymask ffff ugen0 at uhub0 port 1 "Powerware Powerware UPS" rev 0.20/0.50 addr 2 nut version 2.4.0.-pre1 driverctl start gives Can't open POWERWARE USB device, retrying ... the port is set to au...

...device 0.0 on pci2 Jul 4 14:35:17 twinhead kernel: xhci0: 64 byte context size. Jul 4 14:35:17 twinhead kernel: usbus0 on xhci0 Jul 4 14:35:17 twinhead kernel: usbus0: 5.0Gbps Super Speed USB v3.0 Jul 4 14:35:17 twinhead kernel: ugen0.1: <0x1912> at usbus0 Jul 4 14:35:17 twinhead kernel: uhub0: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Jul 4 14:35:17 twinhead kernel: uhub0: 8 ports with 8 removable, self powered Jul 4 14:35:24 twinhead kernel: ugen0.2: <ASMedia> at usbus0 Jul 4 14:35:24 twinhead kernel: umass0: <ASMedia AS2105, class 0/0, rev 3....

...netBSD 3.0. To get it operational I needed to do the following (most of this is from memory...). 1). Recompile kernel with uhid removed. If uhid ataches to the device then libusb is not able to. Have to allow generic usb driver ugen to claim port. >From dmesg usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ugen0 at uhub0 port 1 ugen0: MGE UPS SYSTEMS NOVA AVR, rev 1.10/0.01, addr 2 2). Install libusb 0.1.12 0.1.11 includes a bug fix for *BSD to allow short reads. Without t...

...version: features support (5000) Timecounter "tick" frequency 500000000 Hz quality 1000 Event timer "tick" frequency 500000000 Hz quality 1000 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 Root mount waiting for: usbus0 ugen0.1: <AcerLabs> at usbus0 uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub0: 2 ports with 2 removable, self powered Trying to mount root from zfs:zroot []... Mounting from zfs:zroot failed with error 2. Loader variables: vfs.root.mountfrom=zfs:zroot

...-class, 128KB L2 cache) 767 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 131624960 (125MB) avail mem = 119201792 (113MB) [...] uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 11 [...] usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "VIA UHCI root hub" rev 1.00/1.00 addr 1 [...] uhidev0 at uhub0 port 1 configuration 1 interface 0 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 uhidev0: no input interrupt endpoint This is the output of usbdevs (sorry, we have no lsusb ;-) root at puffwall# usb...

...-class, 128KB L2 cache) 767 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 131624960 (125MB) avail mem = 119201792 (113MB) [...] uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 11 [...] usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "VIA UHCI root hub" rev 1.00/1.00 addr 1 [...] uhidev0 at uhub0 port 1 configuration 1 interface 0 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 uhidev0: no input interrupt endpoint This is the output of usbdevs (sorry, we have no lsusb ;-) root at puffwall# usb...

...=true --------------------------------------- UPS is successfully recognized by OS kernel at boot-time: --------------------------------------- # grep -i smart /var/run/dmesg.boot ugen0: <American Power Conversion Smart-UPS 2200 XL FW:690.17.I USB FW:7.3, class 0/0, rev 1.10/0.06, addr 2> on uhub0 ugen0: <American Power Conversion Smart-UPS 2200 XL FW:690.17.I USB FW:7.3, class 0/0, rev 1.10/0.06, addr 2> on uhub0[/code] --------------------------------------- ...and at run-time... --------------------------------------- # usbdevs -v -d Controller /dev/usb0: addr 1: full speed, self p...

Could people who are experiencing boot-time hangs in 4.9-PRERELEASE try the following patch to see if it helps? I've had one positive report so far, but it would be helpful to get more feedback to determine if this is the right fix to be committed. The problem was that interrupts were getting unmasked too early in the boot process, causing an interrupt storm that usually occurred while USB

...90. [...] Aug 5 12:53:57 goshik /kernel: uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device 17.2 on pci0 Aug 5 12:53:57 goshik /kernel: usb0: <VIA 83C572 USB controller> on uhci0 Aug 5 12:53:57 goshik /kernel: usb0: USB revision 1.0 Aug 5 12:53:57 goshik /kernel: uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Aug 5 12:53:57 goshik /kernel: uhub0: 2 ports with 2 removable, self powered Aug 5 12:53:57 goshik /kernel: uhub1: A-DATA Technology Inc. USB Embedded Hub, class 9/0, rev 2.00/0.01, addr 2 Aug 5 12:53:58 goshik /kernel: uhub1: 1 port with 0 re...

...Labs M5237 (Aladdin-V) USB controller> mem 0xd0006000-0xd0006fff irq 9 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xd0007000-0xd0007fff irq 5 at device 6.0 on pci0 pcm0: <Conexant CX20468 AC97 Codec> pcm0: [GIANT-LOCKED] pcm0: [ITHREA...

...4.0 (USB wired) stopped working. I searched relevant information and found kern/123224 "[ums] Scroll wheel breakage w/ USB MS Wireless Intellimouse Explorer 2.0". The symptom is quite similar. ums0: <Microsoft Microsoft IntelliMouse Explorer, class 0/0, rev 2.00/4.24, addr 2> on uhub0 ums0: 5 buttons and a TILT dir. Note that there is no "Z dir" detected. No one care about that? It is hard for me to live without the mouse wheel nowadays.... I tried another mouse and Z dir was detected properly, so it might be specific to Microsoft products. ums0: <Logitech USB-...

...a time getting nut to work on freebsd. Here is what I have done. I am trying to load the drivers, and here is my ups.conf file: [tripplite] driver=trippliteesu port=auto When I dmesg on freebsd 7.1 for my usb device: uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.00, addr 2> on uhub0 using the usbdevs -v command: Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00 port 1 addr 2: low speed, self powered, config 1, TRIPP LITE UPS(0x4003), Tripp Lite(0x09ae), rev 0.00 I have tried usbhid-ups, tripplite_usb, and trippli...

...Thanks to the precious help from Henning Brauer, I managed to solve an issue with my UPS (a rebranded UPS speaking in Ablerex-ese over USB). Under OpenBSD 4.3, the UPS was claimed by HID. Now that I recompiled the kernel, adding a USB_quirk, this is what I get when I insert the USB cable: ugen0 at uhub0 port 2 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 So far, so good (Henning confirmed this). Trouble is, when I run megatec_usb: root at puffwall:~/nut-2.2.2 # drivers/megatec_usb -u _ups -a atlantisland -DDDDDD Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec_usb]...

Hallo, Following the tips found at https://calomel.org/nut_ups.html I was trying to make NUT operate "APC Back UPS CS-350". The device introduces itself as: #v+ ugen0 at uhub0 port 1 "American Power Conversion Back-UPS CS 350 FW:807.q7.I USB FW:q7" rev 1.10/0.06 addr 2 #v- My config: #v+ [apc] driver = usbhid-ups port = /dev/ugen0.00 pollfreq = 60 desc = "Back UPS CS-350" #v- Unfortunately, when I'm trying to...

Hallo, Following the tips found at https://calomel.org/nut_ups.html I was trying to make NUT operate "APC Back UPS CS-350". The device introduces itself as: #v+ ugen0 at uhub0 port 1 "American Power Conversion Back-UPS CS 350 FW:807.q7.I USB FW:q7" rev 1.10/0.06 addr 2 #v- My config: #v+ [apc] driver = usbhid-ups port = /dev/ugen0.00 pollfreq = 60 desc = "Back UPS CS-350" #v- Unfortunately, when I'm trying to...

I have a motherboard here that reports USB controllers thusly in dmesg (5.4-stable): usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xf7002000-0xf7002fff irq 5 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1...

...bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 11 at device 16.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device 16.1 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, r...

...(no bios) pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82865G/PE/P CPU-AGP" rev 0x02 pci1 at ppb0 bus 1 uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, add...

...any port - then all the ports work fine after resume. I've attached usbconfig and acpidump output. here's what is logged in the kernel buffer during suspend and resume: Her'es the suspend: Jun 20 14:03:34 lucy acpi: suspend at 20130620 14:03:34 Jun 20 14:03:38 lucy kernel: [100031] uhub0: at usbus0, port 1, addr 1 (disconnected) Jun 20 14:03:38 lucy kernel: [100036] uhub1: at usbus1, port 1, addr 1 (disconnected) Jun 20 14:03:38 lucy kernel: ugen1.2: <vendor 0x08ff> at usbus1 (disconnected) Jun 20 14:03:38 lucy kernel: ugen1.3: <Lenovo Computer Corp> at usbus1 (disconne...