search for: tun2

...ice gateway. Each gateway has eth0 on its LAN an eth1 on the internet. We use DSL lines and eth1''s have the internet IP directly attached on it. Each gateway, also, acts as iptables NAT gateway. The outgoing bandwith is 300 kbit, and we tried this (i.e.) on each tunnel: tc qdisc add dev tun2 handle 1:0 root dsmark indices 4 default_index 0 tc qdisc add dev tun2 handle 2:0 parent 1:0 htb tc class add dev tun2 parent 2:0 classid 2:1 htb rate 4000bps ceil 4000bps tc class add dev tun2 parent 2:1 classid 2:2 htb rate 250bps ceil 1000bps tc qdisc add dev tun2 handle 3:0 parent 2:2 sfq tc cl...

Hello, I have an OpenVPN running on a system with Samba 3.0.9. However, with this setting (tun2 is my VPN device): interfaces = tun2, lo bind interfaces only = Yes it doesn't bind to tun2, but to ppp0. What the heck? Tomek

...10.8.20.2 255.255.255.0 UG 0 0 0 tun0 10.8.20.2 * 255.255.255.255 UH 0 0 0 tun0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 doug at torus:~$ ===== On wind: ===== doug at wind:~$ cat /etc/openvpn/torus.conf client dev tun2 proto udp remote *****.org 1*** resolv-retry infinite nobind persist-key persist-tun dh dh4096torus.pem ca /etc/openvpn/caontorus.crt cert /etc/openvpn/windontorus.crt key /etc/openvpn/windontorus.key remote-cert-tls server comp-lzo verb 3 tls-auth /etc/openvpn/taontorus.key 1 doug at wind:~$ rou...

...inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 inet 127.0.0.1 netmask 0xff000000 ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 inet 81.50.114.213 --> 81.50.114.1 netmask 0xffffff00 Opened by PID 68 tun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 inet6 fe80::250:8dff:fe47:e567%tun2 prefixlen 64 scopeid 0xa inet 10.0.2.1 --> 10.0.3.1 netmask 0xff000000 Opened by PID 258 tun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 inet 10.0.2....

Hello all, Yesterday I noticed that my system was "leaking" traffic towards the 10/8 network, I have shorewall installed on multiple machines ranging from single interface devices to ones with 10+ interfaces. I tested all the boxes and they are showing the same behavior. All systems are CentOS 3.4, 2.4.21-27.0.2.ELsmp. Shorewall version: 2.2.1 For the host mentioned is a single

Hi everybody, I want to do the following setup : | | Tun1 - Link 1 | Tun1 | | Router A | teql | INTERNET Link - | | teql |router B | | Tun2 - Link 2 | Tun2 | | This should permit to agregate Link 1 and Link 2 (less the cost of the encapsulation). The two tunnels are GRE ip tunnel. It seems to work fine in theory : I manage to send packet on the teql from one of the node (debian sid with kernel 2.4.20-686). But I''ve...

...0 tun0 > 10.8.20.2 * 255.255.255.255 UH 0 0 0 tun0 > 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 > doug at torus:~$ > ===== > > On wind: > ===== > doug at wind:~$ cat /etc/openvpn/torus.conf > client > dev tun2 > proto udp > remote *****.org 1*** > resolv-retry infinite > nobind > persist-key > persist-tun > dh dh4096torus.pem > ca /etc/openvpn/caontorus.crt > cert /etc/openvpn/windontorus.crt > key /etc/openvpn/windontorus.key > remote-cert-tls server > comp-lzo > v...

Hi! I have reprise try to resolve this problem, suspended from 17 dec 2005 I have try to apply the suggest of Jerry (see above). The problem still exist. See attach shorewall config, dump and tcpdump when I check to exit whit SSH from firewall... In the masq file is reported the last my attempt in order to resolve my problem, however I have test also the example reported in MultiISP.html, but

...in the interfaces file, in that rules are not generated in the fwd chain to permit traffic going out an interface with a "+" in it. [Details] The interface entries: loc tun0 detect routeback,newnotsyn loc tun1 detect routeback,newnotsyn loc tun2 detect routeback,newnotsyn and loc tun+ detect routeback,newnotsyn do not seem to be equivalent because the latter won''t create a rule in the "tun_fwd" chain allowing traffic between different tun interfaces. Explicitly specifying each tun interface (as in the former ex...

...igned-bugs at mindrot.org Reporter: fffilimonov at yandex.ru Hello! At server running sshd with 'GatewayPorts yes'. There is many active network interfaces: eth0 Link encap:Ethernet lo Link encap:Local Loopback tun0 Link encap:UNSPEC tun1 Link encap:UNSPEC tun2 Link encap:UNSPEC IP address at eth0 is 10.10.10.10. After connection: ./ssh 10.10.10.10 -p444 -R10.10.10.10:8081:127.0.0.1:80 I see at netstat: #netstat -nlpt | grep 8081 tcp 0 0 0.0.0.0:8081 0.0.0.0:* LISTEN 8729/sshd tcp 0 0...

https://bugzilla.netfilter.org/show_bug.cgi?id=852 Summary: IPv6 TEE target sends packets to original IP address on wrong network device Product: netfilter/iptables Version: unspecified Platform: x86_64 OS/Version: All Status: NEW Severity: enhancement Priority: P5 Component: unknown