Hi everybody,
I want to do the following setup :
| | Tun1 - Link 1 | Tun1 | |
Router A | teql | INTERNET Link - | | teql |router
B
| | Tun2 - Link 2 | Tun2 | |
This should permit to agregate Link 1 and Link 2 (less the cost of the
encapsulation). The two tunnels are GRE ip tunnel.
It seems to work fine in theory : I manage to send packet on the teql
from one of the node (debian sid with kernel 2.4.20-686).
But I''ve got a problem to put a teql qdisc on the tunnel on one of the
node. When doing :
tc qdisc add dev tun1 root teql0
I only manage to have an RTnetlink message.
But when doing :
tc qdisc add dev eth0 root teql0
It works fine.
The second router is debian woody based with a from sid backported tc
and a 2.4.20 home made kernel.
Is there a special requirement to have this working ?
BR,
--
Eric Leblond <eric@regit.org>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
